"If An Electrician Did This He Doesn't Give A ****"| Electrical Fault Finding| Electrician In London

Подписаться 37 тыс.

Просмотров 441 тыс.

50% 1

In this video I carry out fault finding for an earth continuity issue on a ring circuit I discovered last time I was at the property.
Last time I was at the property putting in some power points for the kitchen and I discovered the issue. To resolve the issue I decide the best course of action is to check for loose connections or to split the ring into two radials on 16 Amp MCBs.
Once the earth continuity issue is resolved the customer asks me to take a look at two lights that aren't working in the kitchen. As the connections are above the ceiling, the customer has to remove the carpet and uplift the floorboards to grant access. When he does this it revealed that the the cables are floating in the void of the floor without a junction box.
This video is made in association with Ads + Brand. Facebook Ads Agency for small business:
Contact Ads + Brand for a consultation: www.adsandbran...
Please also follow me on Instagram:
/ delroythespark

Опубликовано:

28 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 748

@joeds3775 3 года назад

An electrician did it..... Yet he, the customer of the sparks, knows the routing of ALL the circuits.....

@The_Gallowglass 3 года назад

Maybe he watched the hack do it before.

@timderks5960 3 года назад

You wanna say you don't know what your electrician is going to put in? You don't discuss beforehand how they're gonna route stuff and what's going to happen? Not everybody has such an "I don't care" attitude... Also, some people try and fix it themselves before calling an expert, and figure stuff like routing out as part of the debugging process.

@ronaldwoofer5024 3 года назад

@@timderks5960 if its not booze, tits, ass or money nobody cares lmao. they just want the problem fixed they could care less how.

@harrison78 3 года назад

I've always made sure I know exactly where and what everything is any trade is doing in my house. That way I instantly know what is happening if there is a later issue.

@ThatGuyNikolas 3 года назад

@@timderks5960 I'm gonna tell you right now that 9.9 times out of 10 they do not give a shit about how you're gonna do it. Most of the time, all that is discussed is what they want done and where they want it done. Depending on the job or what they want done, I'll tell them what they're options are if I see there's a better way of going about it, or if there's some issue with doing it how the customer wants it. But beyond what they're gonna be using or staring at, they care about as much your average Customer cares about what a car mechanic needs to do beyond "Can you fix it?". If somebody happens to be curious and does want to know, then I'm happy to explain it to them. But it's rarely the case.

@jackk355 3 года назад

I know nothing about electrical work, but it is interesting watching you work, seeing your approach to problem solving! Huge respect to your trade.

@Dan-fz5nn 3 года назад

US sparky here, dude I've never seen pendant cables coming straight through drywall before, it looks ridiculous LOL

@supremeicecreme1658 3 года назад

Yeah, those sorts of lights are ones where you have a central rose and those pendants all connect into that, then you install hooks to tie the cables off to so they hang from there. It's a part of the industrial look they're supposed to have.

@tipi5586 3 года назад

@@supremeicecreme1658 Definitely doesn't mean there shouldn't be some fitting to connect it to the ceiling. It looks less industrial and more like a machete showroom in a home store that isn't actually a building, so it doesn't matter if the lights are attached without fittings.

@FourthMan82 3 года назад

Not been in this business for long then? I've seen shit like this far too many times.

@Dan-fz5nn 3 года назад

@@FourthMan82 12 years, seen a lot of brackets and canopies just screwed to drywall with no box. But this doesn't even have a canopy. It's the worst final product install I've ever seen.

@Dan-fz5nn 3 года назад

@@supremeicecreme1658 No, it's flat out against electrical code, no inspector would ever pass such a hacked our job. The electrician in the video notices it immediately as well.

@Cablesmith 3 года назад

He definitely did that himself 😂 love how you burst out laughing at it 😂😂

@eastwayelectrical 3 года назад

I'll guess we'll never know

@billyt9921 3 года назад

@@eastwayelectrical he'll know 🤣

@JayTheSparky 3 года назад

💯%🤣🤦🏻‍♂️When Delroy started laughing it killed me! Had a job like this where the client wired their own loft conversion...went to a 2 gang switch and you had to have one switch on to make the “New” loft landing light on...he admitted he had done it himself in the end and said he couldn’t get it back to how it should be and he’d lived with it ever since but was now selling 🤣....the pendants were all three plated too

@glenecollins 3 года назад

I used to live in a house owned by an electrician (who worked at a nearby power station) it had the original cotton insulated wires in it, some asbestos insulated wires and the new power points were all wired in around the new RCD with way too much wire in between. Australian wiring tends to be simpler than UK or US wiring but we had so much wire l couldn’t get radio in some areas

@jp2002parry 3 года назад

So has he got you back.?...

@mickpospiech1363 3 года назад

When you were touches them wires and the phone rang, I nearly jumped off my sofa. lol

@greatbambino2993 3 года назад

😂 me too

@garyredmond1890 3 года назад

Bet Damien was straight on it as soon as you walked out the door, now he had a lot more electrical knowledge to work with. The pendants looked awful.

@jimbojones8208 3 года назад

Absolutely disgusting.

@simiiee 3 года назад

Apprentice here from ireland your helpin me understand alot. Your a gent del big respect

@eastwayelectrical 3 года назад

All the best sir

@crysis4real 3 года назад

The worst lighting arrangements I seen in a home; looks really nasty ! Well done in finding all these major serious issues !

@andpeoplesayineedalife6418 3 года назад

Bet you thought there was nothing wrong with them connector blocks with them pigtails you use though 😂

@PiezPiedPy 2 года назад

I wonder how many times the owner has burnt his head on those bulbs while doing the dishes lol

@wolfrobots118 3 года назад

I love the way you talk....you're so nice to your customers.

@richardclarke376 3 года назад

Who the heck has wires hanging out of the ceiling like that!!!

@pauldriscoll6319 3 года назад

it looked a bloody mess and it was a bloody mess lol

@Михаиллеви 3 года назад

It looked like some form of abstract artwork. Some wall unit doors looked like they hit them

@liquidsnake6879 2 года назад

Definitely did that himself, also asked about the gloves you were wearing which indicates he's curious which is a common trait in DIYers, nothing wrong with it so long as they do their homework and get someone to double check their work whenever they're not 100% sure of something, but i'd hope there would be more opportunities for them to learn in a safe environment if they want to and are curious

@sj8099 Год назад

Many people think it's safe because they don't hear a bang. Always tell people just because it works doesn't mean its safe.

@mfx1 3 года назад

One thing I would do particularly if working along with other people in the house is fit temporary touch proof test points to exposed cables you're about to live up for testing, you can easily fit them with Wagos and prevents embarrassing accidents.

@drpantastic1969 2 года назад

Agreed connector blocks are a must to give basic protection for yourself and others you gotta stay safe Del

@S3dINS 3 года назад

Thank god for people who understand electrics. It’s one thing I have never been able to get my head around.

@ziggystardog 3 года назад

I’m shocked, shocked to find that unauthorized wiring is going on here. Your wiring diagram, sir…. Oh, Thank you very much.

@mancave7879 3 года назад

Absolutely RIGHT ! 'Do it properly', a 'Must' for all electricians, for the sake of all people !

@jonobrow 3 года назад

Lots of people commenting on the lights hanging out of the ceiling but I'm just as appalled by the quality of the plastering.

@1992jamo 2 года назад

If you look closely, it's where he's drilled in the wrong places and had to repair it hahaha. I watched this video ages ago, and I didn't notice that until now.

@l337pwnage 11 месяцев назад

I didn't look at how they were mounted, which is, they aren't mounted, lol. One time I did live in a place, tho, that had a hanging dining room table light. It was mounted, had a center piece, and a fixture at the end, tho. The center piece had a spring loaded cord winder in it and you could pull it down closer to the table, or lift it and it would wind in the cord to raise it.

@seniorcomputer3292 3 года назад

My gosh. What a hell hole. No junction box. Complete rewire after lifting the floorboard. Thank you. Informative video.

@georgecroney6168 3 года назад

If you're ever short on time and effort and you need to fit 5 lights, drill 20 holes and polyfilla the ones you don't end up using

@silureswarrior6045 3 года назад

"If I sent out an apprentice trained by me to do that and I came and inspected i would suck him straight away" RU-vid really need to work on these subtitles

@eddiew2325 3 года назад

sounds like a good trade off

@dontthinksosomehow 3 года назад

You could get arrested for that 🤣🤣🤣

@soldiers303 3 года назад

You're a bit desperate? Lol

@stonkykong5239 3 года назад

Nothing beats a job done with a happy ending 😂

@Engineer9736 3 года назад

@@soldiers303 Silures was quoting the subtitles which RU-vid generated.

@stephenknowles8580 3 года назад

Great vid del. I bet, just as you thought it couldn’t get any worse with the non existent ceiling roses and both rings on the same breaker. He saved the worst for last with that mess under the floorboards🤨

@eastwayelectrical 3 года назад

Thanks for the kind words

@ianjeffery3762 3 года назад

I'm not an electrician but I can tell he did those lights himself! Funny how he knew exactly where the cables were....

@stephenllewekyn706 3 года назад

let me just go and get the exact floorboard up you need del

@zXLuke4efcXz 3 года назад

In his defence if I had an tradesman round I'm pretty sure I'd be able to remember which space and carpet we had to lift up to access the floorboards too...

@shaunlewis286 3 года назад

@@zXLuke4efcXz if you had a tradesman in who just dropped those cables through the ceiling like that I'm sure you'd remember that too LOL

@zXLuke4efcXz 3 года назад

@@shaunlewis286 isn't that what I said lol

@bobhook336 3 года назад

I know where all my cables are. I took photos as it was rewired so I didn’t ever drill into them. Same with plumbing

@rubybrady7051 3 года назад

Very polite man. Good at his job

@markfire1235 3 года назад

Delroy I love your RU-vid videos I’m an electrician and run my own business in Kingston Surrey I’m really busy at the moment but when you do good things good things happen anyway good luck best wishes Regards Mark

@eastwayelectrical 3 года назад

Thanks Mark

@social3ngin33rin 3 года назад

Figuring out those circuits would drive me nuts lolol

@eastwayelectrical 3 года назад

😂

@Cant_be_arsed 3 года назад

I think Damion definitely did this himself 😂😂

@eastwayelectrical 3 года назад

Thanks for sharing your thoughts

@eicrcomplianceltd7590 3 года назад

You always gets the best jobs mate, how you so lucky? get the builders back to correct it 🙃😁

@eastwayelectrical 3 года назад

😂

@gorillaau 3 года назад

The best jobs makes for the best videos. Seriously, dodgy builders will come back and do another dodgy and then bugger off again. Wash and repeat

@tresslerj1985 3 года назад

First beer in a month and enjoying it while watching. Good stull Del!

@bencrawford1376 3 года назад

I keep trying the same but lacking the will power!

@eastwayelectrical 3 года назад

Enjoy!

@brianoceallaigh8714 3 года назад

A lot of hoof and spur marks around that job done on those light connections... gr8 video Del...

@eastwayelectrical 3 года назад

Thanks Brian

@dwarfsbaneironfist2527 3 года назад

I used the same electrician for about 10 years with no problems. I could not get hold of him to replace a Vent Axia fan. After about a month I hired another electrician. He told me that all the wiring was sloppily done and asked if I had done it myself, I had all the documents that the electricians give you, so I was able to show him proof an electrician had done the work. I had him check the otherthree fans, shower, kitchen etc, I went up into the loft to have a look. He was right, everything looked like a blind monkey had done it. We do tend to trust tradesmen.

@R.H.Electrical 3 года назад

We all know he did those lights himself lol He knew which floorboard exactly for the terminal connection blocks and you could hear it in his voice when you said.... you did this didn't you 🤣🤣

@lionheart6960 3 года назад

Well said Delroy there are some serious Cowboys 🤠 out there

@eastwayelectrical 3 года назад

Thank for the comment, hope you enjoyed the video

@ConstantlyDamaged 3 года назад

Oh, that lockout on the Earth Leakage switches. From what I heard, that was to stop idiots from using tape or wire to hold them in the on position. Even if held it on, and you pressed the test (or have a fault), it would still trip it and cut power (similar to how high-current commercial breakers work). This is why we can't have nice things.

@davidpatterson1574 3 года назад

Excellent job Delroy; you are doing a good job.

@eastwayelectrical 3 года назад

Thanks David

@brettvanwey9419 3 года назад

It’s good you pushed and made sure this is fixed properly.

@yensabi 3 года назад

You seem to find these dodgy jobs here and there and it’s usually the homeowners handy work but they will never admit to it....😃 Nice one Del and keep up the good work mate...👍

@eastwayelectrical 3 года назад

Thank you sir

@Mistermoobs 3 года назад

Ahh the customer has done so much himself.

@thecastellan3657 3 года назад

As I've said to many apprentices, it's easier, quicker and cheaper to do the job properly first time, that way you only do it once.

@eastwayelectrical 3 года назад

Wise words

@VaeVictisXIII 3 года назад

Such a top bloke, all about that honest graft

@dilligaf2386 3 года назад

Looks like a job I employed an electrition to do and had the nerve to moan about the council asking him to do a course 17th edition and moaned, I've been an electrition for 40 years. I ended up redoing it myself, looks the nuts now. It's not about how long you've been tradesmen for its do you care enough to do the job right.

@leeroy361 3 года назад

LMAO - those lights in the kitchen. When he said it didn’t look nice. It looks shit. This mans a DIYer for sure.

@edc1569 3 года назад

A wire just hanging through the plaster of the ceiling looks appalling, how are you meant to service anything or even decorate. The notching and drilling of those joists is pretty scary too.

@eastwayelectrical 3 года назад

Defo unconventional

@JayTheSparky 3 года назад

I’ve seen this once beige where a maintenance man had changed some pendants...he had put the pendant up in the floor and then stuck the ceiling rose straight over it connections weren’t accessible 🤦🏻‍♂️🤣

@jak50cent 3 года назад

@@eastwayelectrical how does that plug tester works? Is it just testing for power or is it a circuit tracer

@anttimaki8188 3 года назад

@@jak50cent it tests the power, but it also shows you that socket is wired correct, which is more important.

@jak50cent 3 года назад

@@anttimaki8188 oh ok I have something similar it’s not audible like his that’s why I asked. My plug tester has a reset button to text GFCI receptacle. I love service work, generator, and EV charger jobs

@The_Studioworkshop 3 года назад

That’s horrid. He obviously had a go himself. Fair play, sometimes it’s hard working with thick cable and those connection blocks but that’s no way how you do a junction box. Awful awful!

@eastwayelectrical 3 года назад

Junction box definitely needed

@GoCoyote 3 года назад

US electrician here. Is it legal to have hidden junctions in the UK? Here in the US, all wires must be junctioned in a device box that is accessible, and cannot be done in a floor space between floors unless the box is accessible, usually from a light fixture box or ceiling junction box, and less commonly in a floor box. Buried boxes and junctions are some of the most time consuming faults to find. That is a fire waiting to happen.

@IncognitoX8 3 года назад

I bet it's not, danish electrician here, and it's a big no no. No electrician in his own mind, would ever do this.

@cuebj 3 года назад

Looks like a council direct labour job from 1970 with subsequent bodges by similar cowboys. Only things missing are all the 1930s and 1950s fittings and cable offcuts left under the floorboards. Almost exactly same as the filthy chaotic mess we found in my daughter's new maisonette. Took a week to sort it out and make it safe

@seandempsey9396 3 года назад

Wtf how do these people get away with it?. That was not installed by a qualified electrician no way, Well done Delroy it's a good job there's proper sparks out there to put things right. Like you mate. Fantastic video

@eastwayelectrical 3 года назад

Thanks for the kind words

@jontownsend8090 3 года назад

Wtf, deffo a DIY installation. I love the position of the smoke alarm, maybe next time, put it in the consumer unit.

@funkylee2010 3 года назад

Quality diy workmanship 🤦‍♂️ 15 mins in ya video my mind was made up rewire 👍🏻

@greatbambino2993 3 года назад

Interesting to see electrical outside the US. What a mess for this house, but awesome walkthrough!

@eastwayelectrical 3 года назад

Glad you find the content interesting

@willster947 3 года назад

Great video, had a similar thing going on in the new house I bought. I removed all of the extra surface sockets and everything worked properly. Lights are still an issue but at least they work.

@JIBS. 3 года назад

Best electrical RU-vidr is Delroy by far.

@eastwayelectrical 3 года назад

Very kind of you

@Penfold8 3 года назад

I got so into the video that that cell phone scared the poop out of me when it rang LOL!!

@ianmcgonigle7225 3 года назад

For recording RCD trip times is it not x1 faukt protection x 5 additional protection?

@arniewheeler4673 3 года назад

3:30, noted, you checked the earth tightness in that socket but you didn't look to see if the earth sleeve had prevented a good copper connection. just a thought...

@BoxwatchTv 3 года назад

He does that without thinking its not worth noting every little action on a job in these vids but you wouldn't know that as you don't make RU-vid vids to edit #CleverClogs

@hyosunggt125rcomet 3 года назад

Its like the house of horrors, even the sockets and light switches just seem to pop up everywhere. 14:56 is my favourite switch.

@M00SEMAN67 3 года назад

some home owners are just complete imbeciles. rule of thumb, the more academic they are, the bigger the bog job, speaking from many personal experiences.

@Михаиллеви 3 года назад

You got the patience for this madness 🤣

@Ash_Lawless 3 года назад

European panels seem so tiny for working in. im Canadian and the panels we use are WAY bigger.

@soisaidtogod4248 3 года назад

They are 240V everything there.

@Ash_Lawless 3 года назад

@@soisaidtogod4248 i know that. That has literally nothing to do with my comment.

@peterfitzpatrick7032 3 года назад

@@Ash_Lawless lighten up Francis.. 🙄😒

@MsSpermator 3 года назад

I live in europe and my panel box is 1.7m by 1.7m. I wouldn't call it small by any standard...

@Ash_Lawless 3 года назад

@@MsSpermator sounds a lot bigger than the 1s ive seen i videos. The 1s ive seen are all like 500mm by 500mm-1M.

@mrpete1972 3 года назад

Great vid, so glad to see your work and explanation. Hope Damien pays you well for sorting someone elses mess.

@eastwayelectrical 3 года назад

Thanks for the kind words

@6string327 3 года назад

I just wired my house in Ontario Canada, as a home owner you can do your own work and get it inspected by ESA. It's pretty extreme in terms of requirements and learning. All circuits must be AFCI protected from the breaker panel, which means AFCI breakers, which run around $100 each. I used 15 of them lol. AFCI = arc fault circuit interrupter.

@johnconaboy9461 3 года назад

That joint was Outrageous! was your client a little sheepish not wanting to own up to his DIY antics, no Electrician would undertake such a task, I worked with some characters back in the day, but seeing that it's pack the tools away time and return another day the whole place needs looking at in depth

@eastwayelectrical 3 года назад

Thanks for sharing your thoughts

@dave8168 3 года назад

Looks like a fire looking for a place to happen. Can't help but wonder if there are any more "junctions" like that in that house.

@Mortarion6666 3 года назад

The smoke detector in the way of the screws in the fuse box 😂😂 the irony is killing me 😂😂

@mrhlp470 3 года назад

my old man would of given me a slap for that if i had done it as an apprentice well done delroy

@michaelbrown984 2 года назад

Very interesting to see how you problem solve step by step.and talk it through..

@benfraser8728 3 года назад

I am in SA. our regulations here require every earth termination with 2 or more earths need to be crimped to gather then terminated in box/switch/plug. If you lose a live, or neutral, your equipment will not work. Then requiring back checking to locate a fault. Loosing an earth, never, with great consequences can cause electric shock.

@JohnstonPettigrew 3 года назад

Did you sort out his ring for continuity yet?

@Xclub40X 3 года назад

Wow that first shot of those wires is truly shocking⚡⚡.. And both upstairs and downstairs on same circuit???? And no earth continuity??? Truly astonishing and for nothing good

@kramsniggah4333 3 года назад

Shit - nothing like a total noob attempting to burn their house down. Great detective work Delroy!!

@sonnikdoh2510 3 года назад

You wanted heated floors right? Good, cause this should catch fire at some point.

@tazz1669 3 года назад

I'm no spark, although during my apprenticeship back in the day you did a but of electrical work, but there is no way I would do that in my house It's was a disaster waiting to happen glad you switched that to a radial but that took some figuring out, no idea why is not a ring some well dodgy wiring there. If I'm getting anything done in my house I like to keep an eye on what's going on, might not know everything but at least you get an idea if the guy doing the work is a cowboy or not.

@stuartmc18 3 года назад

Most annoying question from a client when you're doing fault finding: 'How are you getting on?'

@johngoard8272 2 года назад

That was certainly a real lash-up Delroy and it made me crawl at the thought of leaving it like that.

@edwinvp 3 года назад

I have been in a house where ALL the installation wires were white. Good luck!

@ek6868 3 года назад

Good video plz do a part 2 if possible👍

@eastwayelectrical 3 года назад

Thanks EK

@pauls826 3 года назад

Funny that you proper caught him out there haha

@stepheng8779 3 года назад

Bad omen going to see Damien and his ceiling lights 😂

@camptube7621 3 года назад

Love the wire just sitting on the hot copper pipes which provide earth points. Magic! He could have fitted these lights with nice chrome fittings. Looks terrible just through a hole.

@standbanger2 3 года назад

I am not a qualified electrician but i know my way around elecrics, an I'm not OTT either, BUT i would never do an installation like that, i couldn't sleep at night if had done that! I do have a feeling he did do it himself because i don't think even a cowboy electrician wouldn't of done that!

@gogee8510 Год назад

Love your work, love your videos. That bird's nest is really a disaster. I had to laugh as well. I too would sack anyone that did that. Was there a follow up video with the junction box put in?

@kingofthetrowel1725 3 года назад

Nice one delroy 👍👍 keep them coming 👍👍

@eastwayelectrical 3 года назад

Cheers

@jansmit9009 3 года назад

The overal quality of the works done in his house is very poor, so I bet he searched for the cheapest or he did the most things himself.

@ghug6764 2 года назад

Brilliant 🤩 Delroy

@andreasjonsson8075 3 года назад

What are the black cables that are screwed fast in the electrical main unit????

@leighdamian 3 года назад

The householder has done that work himself.

@B15SDMDESIGNS 3 года назад

As soon as he said he'd take up the carpet and flooring I knew the owner done it lol

@Doobrie2 3 года назад

Yep when he said "but delroy it just doesn't look nice" Should have run away from that, Well done for standing your ground.

@peterc132 3 года назад

Thanks for this video, It's super insightful!

@chobbler 3 года назад

You know you'r having problems when you got start taking floor boards up :0)

@ishkebab 3 года назад

You put the highest of the 5x test on the certificate as your 30mA rcd is for additional protection

@jameswavs2981 3 года назад

Correct although I prefer the 17th edition minor works that stated both max 1x and 5x. At least it proved you tested the rcd worked at its rated trip current.

@RD-mm5fk 2 года назад

English is not my first language so i was wondering what you mean when you say the circuit is a radio?

@chrispartosbro4555 3 года назад

24:02 All you have to say is what if a kid knocked over a bottle of pop and it went straight down there between the boards, or this pipe here burst?

@adivarso8175 3 года назад

When i saw those tiles I just knew this guy did those and the dodgy wiring.

@Mic_Glow 3 года назад

hydraulic-electrician-stonemason-tile layer-plasterer-car repair-welder-painter Cheap.

@mrmotorvator5151 3 года назад

Very patient...il stick to plastering thanks

@misterbonzoid5623 3 года назад

Wow. I did amateur electrics for years, up until the early 90s, referring to a copy of the 17th edition of the IEEE regs as it was then. Installed consumer units, fixed a shower whose metalwork was live, fault found and fixed all sorts. You need a logical mind and high standards. One day I found some Polish lads had wired in a garden office building and just left the cover off a consumer unit under the stairs. There was a child's scooter handlebars next to live mains terminals.

@nathantheplumber8914 3 года назад

Love your videos total honestly

@TheAdamEdward 3 года назад

Quality Video Delroy

@eastwayelectrical 3 года назад

Cheers Adam

@cainclay1193 3 года назад

He knew which floorboards to lift 🤣

@eastwayelectrical 3 года назад

,🤔

@edwardfrench9925 3 года назад

For a bit of balance, I’m currently in self build hell and have had three neutral burn outs including the smart meter melting. These all occurred where the ‘professionals’ had been at work.

@eastwayelectrical 3 года назад

OK. Doesn't sound good

@barrackobama5470 3 года назад

You hired cowboys not professionals

@edwardfrench9925 3 года назад

@@barrackobama5470 yep

@llVIU 9 месяцев назад

ahhh I see you found my lunch, I packed some spaghetti and hid it in the floor. I didn't want my co-worker to steal it.

@ashleymccarthy6232 3 года назад

Cheers Del; Always a masterclass and a laugh 😅👍🏻

@eastwayelectrical 3 года назад

Thanks Ashley

@noamfreedman7886 3 года назад

You speak logic man

@noamfreedman7886 3 года назад

Would you like an apprentice

@psha4310 3 года назад

Hi Delroy The Spark, is the trip time supposed to be 40mS or below and you have got 63mS. i just done my 2391 and that's what they told us. thanks

@deandavis2180 3 года назад

Below 40ms tested at 5 times mate 👌 it's all good here

@stuartlockwood9645 3 года назад

Hi Delroy, right jar of worms you got on that job, you got patience , man I would have cracked up, god knows what else you'd find in that house,lol stay safe mate, best wishe's to you and your's, Stuart.uk

@seniorcomputer3292 3 года назад

Astonishing how patient with the customer.