Тёмный
No video :(

IF Sampling and Zero-IF Receivers 

TheGmr140
Подписаться 2 тыс.
Просмотров 4,7 тыс.
50% 1

Опубликовано:

 

27 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 9   
@theoryandapplication7197
@theoryandapplication7197 3 месяца назад
thank you very much
@odissey2
@odissey2 Год назад
However, the "zero IF" sampling seems to be much cheaper to implement. No high speed ADC and FPGA.
@TheGmr140
@TheGmr140 Месяц назад
Yes, but a analog iq calibration will be needed, but nowadays everyone is using the rfsoc chip 😊😊
@EvgeniX.
@EvgeniX. 3 месяца назад
so any reasonably priced TX capable SDR that's not Zero-IF?
@TheGmr140
@TheGmr140 3 месяца назад
Trx duo sdr
@EvgeniX.
@EvgeniX. 3 месяца назад
@@TheGmr140 Frequency: 10 kHz to 60 MHz so only good for HF :( I wonder if things like MicroPhase ANTSDR E200 which is AD9361 based, any good?
@phillipneal8194
@phillipneal8194 Год назад
So I wanted a 20 meter hf receiver, (14.-14.3Mhz) could I use an ADC that samples at 2x14, or 28 Mhz ? On an 8 bit ADC spec is 28 MSPS (mega samples per second) the same as 8x28 or 228 Mbits ? Or would it be 228 Mbytes ?
@TheGmr140
@TheGmr140 8 месяцев назад
Ideally fs is 4x times greater than signal of interest 😊
@phillipneal8194
@phillipneal8194 8 месяцев назад
Ok. I understand. So I would need something a little better than 4*14.3 or around 60 MSPS. @@TheGmr140
Далее
DDC, Digital Down Conversion
11:57
Просмотров 6 тыс.
IF Frequency
9:23
Просмотров 28 тыс.
ПОЁМ НАРОДНЫЕ ПЕСНИ🪗
2:04:11
Просмотров 1,1 млн
Shannon Nyquist Sampling Theorem
17:19
Просмотров 130 тыс.
Software Radio Basics
28:36
Просмотров 89 тыс.
What would 10,000 endermans build over time?
12:14
Просмотров 3,6 млн
IQ Signals
8:19
Просмотров 28 тыс.
#41: Receiver Architectures
25:22
Просмотров 1,3 тыс.
Image Frequency
3:16
Просмотров 837
ПОЁМ НАРОДНЫЕ ПЕСНИ🪗
2:04:11
Просмотров 1,1 млн