If You Use A Reciprocating Saw, THIS ACCESSORY IS A MUST HAVE! 

I just want the shirt so when people say,"Hello, Vince." I can respond with," Wassup, cuz?" 🤣👍✌

I use the Diablo blade in my Ryobi reciprocating saw to cut through bank vaults. In and out before they know what hit em! One more heist and I’ll have enough money to upgrade to Milwaukee…

Wood has gotten so expensive that you've moved on to cutting steel for content?

somebody out there like, " I have no problem getting the job done with my harbor freight tools".😂

When you cut through thick metal, use cutting fluid. It comes in a spray can. Otherwise you are causing excessive heat and wear on blade.

I’ve used their carbide pruning blades to remove huge stumps and their roots. Cutting right into sand and they held up great.

Wow Vince the things you endure to bring us the fact's ! My hat is off to you, thanks for bringing us the truth and not marketing BS. It is appreciated.

That blade is a beast, I’m betting 25+ cuts using oil. Keep up the great work as the goal is for us to continue to inspire others to build something awesome!👍🏼

That blade is surprising me today

I parted out an old wrecked car I used two blades... 1 Milwaukee.... Lasted two cuts through the frame and it was done... Diablo finished the job 30 or forty cuts later..a lot smaller gauge than that heavy Ibeam you cut, that was an impressive test. I also noticed even after 7 cuts the time to cut through was still pretty consistent. I'm sold in Diablo best blades out there.

Always a good day when VCG construction uploads!!

That's one heck of a blade.

I always cut thick steel on slow speed and always cooled the blade down constantly as im cutting with some water, it preserves blade life so much. My job pays for the Milwaukee sawzall blades so i have to make em count. Going too fast with the sawzall speed will burn out the blades like crazy, if it sparks its too hot.

No broken toofesis!! 💪🏼

2:55 TMI bro 😂 👍👍👍

I love this video. Let's find out how many times we can cut threw this I beam. Why? Because we can!!!! Love it.

I locked my keys in my safe. Had to cut my way in, with these blades. Will always buy them. Like a hot knife in butter, but I was nervous, because I haven’t used them before.

I've been telling people about diablos thick metal Sawzall blades for months now. Can't beat em

Very Very Nice !!!!!!!! The biggest think in resist memory was a maple tree I cut up about 2ft across that a storm knocked down. Years ago we used to cut down old wood frame houses, and cut them up with corded Milwaukee Super reciprocating Saws.

Awesome ..I've only used the regular Diablo metal cutting blades but I cut so many nails on a bad framing job with one blade it's crazy and that new one is definitely a beast

Nice shirt Cuz, Diablo + Miwauke = Beast mode 💪😎

Worst job ever on probably few months ago did a demolition job on a garage / kids playroom and they decided to basically use a flat roof and used 1/2 in plywood and half inch of tar for the roof I must have used at least 30 Sawzall blades because they just kept getting all gummed up with tar. Big waste of money even tried soaking the blades and it probably would have been cheaper to rent a excavator but I guess we all learned our lessons. 😎🇺🇸

Impressive blades and impressive tool as well!

Used three of those blade to remove about 200 feet of 2 inch black gas pipe. Each section cut to 10 footer lengths to get them out of the restaurant basement. And also cut about 60ft of 4 inch cast iron sewer pipe. It blew our minds how we did all that demo with only three blades. Spent about 70+bucks for a package. I bought 3 of them thinking i was going to use all three packages.

I have one that I only use on pvc, my reasoning being it will always be as sharp as brand new, always make a nice clean straight cut, and cut fast. Absolutely love it. For everything else I've been using Milwaukee demo blade, and metal blade for certain things. Love the wrecker blades, they cut wood, pvc, nails, large aluminum wire, hardy board, some metal, quickly and cleanly and last forever. Even when they start to show wear they're great for cutting stuff with dirt in it or plaster, stuff I don't wanna dull a brand new blade on.

That's pretty impressive! I would not have believed it had you not demonstrated it.

Amazing blade

Wow this video was full of good information, keep up the good work ! Loved it

1:53 before go any further, I’m expecting/guessing no “cool” time b/t cuts and so I’m gonna say…..9 cuts till start having “issues”. (Teeth breaking/missing) And not sure if talking about “blade issues” or “operator issues”…b/c cutting a I-Beam like this w/ a recip multiple times….well, let’s just say; Vince gonna wake up 2mro and see a Chiro, get a medical massage, and wish never made this video😅. Joke Vince, k is your tough, that above, would be me after cutting this🤣. Do agree, back in day; would have been laughed at if tried this with recip and a blade😳, but today, I’M doing the laughing 🤣 b/c the Diablo blades are just THAT GOOD and my go to for all my “bladed” power tools, and that goes for spaddles, hole saw, router, and now even OMT blades baby👍🏻👍🏻 Diablo has us covered for just about any tool and application. Now just need a Diablo partnership for free “blades;bits/etc”……goodbye Norske, and hello Diablo 😉 Thx Vince as this was a fun one, but what vid isn’t 😉 Cheers✌🏻 P.S. o see ya Nick, and thx for all you do bro👍🏻👍🏻

Best blade I ever saw. Worth the money.

If you are an experienced sawzall'er - there is no way that you're NOT impressed by this blade's performance...WOW !!!

Thanks for the information Vince 👍

I used one to try and hack a cast iron tub into manageable pieces so I could remove it from the house. I burned the blade up a quarter of the way through then opted for a diablo diamond cut off wheel to finish the job.

Awesome video. Seeing is believing. Thx for providing it really works!

On cut 5 I noticed it was slowing down, but it didn't stop. That was amazing.

I bought a Diablo blade for my recip saw and used it to sever 5 in ground tree root. Each root was about 5" thick. The blade still shows NO damage, only some red paint is worn off Really a shock for me. Also ; I was using a Harbor Freight Recip Saw.. Both the blade and the saw are still good.

I cut a rusted-in trailer hitch out of my truck's reciever with my 12" Diablo blade. Slow speed and keeping the cutting area cool was key and multiple cuts to get it ready for a bed extender.

Time to cut : 1st 3:05 2nd 3:12 3rd 3:26 4th 3:40 5th 4:10 (battery died) 6th 3:38 7th 3:45 Just Intresting because I always assumed as the blade dulled it might start taking twice as long to cut something...but it seems almost as sharp the entire time. You should do a part 2 with the same blade 🙂 God bless you for even doing this guys, I think I'd rattle out my fillings lol

I really appreciate the great info, thank u gentlemen 👍

Was trying to figure out how to cut tongue off lake house mobile home, was definitely over thinking the process. Thanks for video, you saved me a lot of work!

Thanks for doing that Vince, now we know.

@VCG Construction…. I love this video and I love the shirt…. Awesome as usual… 👍🏼

Great test! Thanks for the info.

*Ya gotta admit that is amazing for a blade!*

Wow 🤩 amazing probably could go at least 3 or 4 more times

That was awesome! 👍🏻

You just can’t beat corded for industrial use !

Instantly sold, bought all diablo blades foor wood and steel!!

How well would it have done if you had used cutting oil?

Every video you do gets my attention in the first minute. 😆

2:57 that’s what’s she said 😈🤣🤣🤣🤣 have a great day everyone

The real test results were on the counter's display. Started at the low 3 minutes and the last cut was at the high 3 minutes. But your muscle fatigue is a factor too. It would be interesting to continue the cutting at a different time and watch the counter but I'm sure you'll run out of beam before the blade will get dull.

I cut up a 60 foot trailer frame into 4 foot sections with two of them blades

THAT WAS FREAKING AMAZING

I don’t have any of those, but I like Diablo’s blades. I also like Milwaukee’s torch blades. They seem to hold up well too.

Great video cuz! Where can I get a shirt like that? Nice cut by the way and I’m not talking about the cut on the IBEAM either! I’m talking about the FRESH cut on your HEAD! 😂 Say HI 👋🏼 to the Mrs!

Diablo everything! LOL

I bought them for my circ saw, now I got to get some for my sawsall.

That was impressive.

The blade lasts longer than the 12Ah battery--and most likely longer than your shoulders can take--the body beating Vince takes for the channel. Today's episode was brought to you by the letter I.... seven times. Nice blades! OK, you got me... VCG spending my money again and I don't cut I-beams.... Vince could sell snow blowers in Florida.

Very Impressive!

Need a ttr with Milwaukee torch vs diablo steel demon!

Big news. If you simply use water when cutting it Will extend the liftime 10 times. Just dipp it in a bucket with water or spray on. Trust me

As long as it is rigid metal it cuts great and lasts, cut one metal framing jiggly stud and the teeth snap quick.

Amazing 🤩

I did over a dozen 1/2x3 plates for a railing demo, ran through them all no prob, did much better then the Milwaukee torch blades!! would be interested in a test vid

Good stuff 💪🏻

Thats awesome would be useful for many things wonder if they do one for concrete cuts.

Sold

Cool gotta get me one of them blades

I have cut with that blade, all my tractor attachement bucket brackets that were way thicker, about 3 years ago, and shortened my palet forks, since then I built a trailer with 2x3 metal beams 1/4 thick and cut multiples thing with it, I still have the blade and still in great condition, but I would never trade my Makita tools for ANY other tool, but I agree that the red ones are the second best...lollll

They make circ saw blades that will cut 5/8 STAINLESS bolts in wood like butter

I'm going to get a couple for my tool box

Love the shirt💪😂

I know what to get my next trip to depot!

Cutting through roughly 6mm thick I beam. That's crazy.

I've used these blades I've abused these blades but if I have to cut a piece of Steel it's either going to come down to a Sawzall or a grinder because I do not know nothing about gas and settling torches one thing I always wanted to do was learn how to weld but not only do I use the Diablo but I also use the Milwaukee Sawzall blades because it depends on the job and what I'm cutting. Use the expensive blades when needed use the cheaper blades when needed... 😎👊🇺🇸

I caught that Spyderco para 2 tanto

If you've never cut through a beam with a recipro/ Metal Blade on it you've never tried your tools out. A normal Metal Blade and a decent battery does the trick. Nice sell Vince,

These blades are awesome use them to cut through thick 3x6 mull bar in windows that is solid metal and we get 10 cuts atleast Diablo is the best!

I love Diablo blades

Man vince is getting slim again keep up the grind 👍

Compare the Milwaukee nitrus carbide blade!!!! I hear its better from a lot of plumbers

i see you're point blade doing the work maybe how tool reacts might differ with brand . but cut is clean sure angle grinder might work but they shoot sparks a lot.

Anyone who questioned Diablo blades you are a handyman at best ! Wake up !!!

Did you have the saw in regular recip or orbital action? My brushless Ryobi has the option for either but honestly I can’t really tell a difference!

Cut open a doorway on a storage shed in 5 minutes but I used a Lennox carbide blade

That is some super thick I beam looks like 1/4 I beam to me @Vcgconstruction

Incredible!!! Was wondering if you were going to take tomorrow off from work being that blade wasn't stopping

My panel hacksaw with an 18 TPI blade can eat I-beams for breakfast as well. What scrappers need in their toolboxes.

Dig the spyderco vince

Diablo is great

Just found this video. I do rail maintenance at work. We use a heavy rail saw. I'm kinda curious if this blade would hold up to cutting rail. 🤣

I wanna see this Diablo blade vs the milwaukee carbide nitrous blade. I haven't used the Diablo Amp yet but the nitrous blade works great for cutting the cast iron I need cut. And several Times. I definitely get my money's worth

Diablos the only brand I will buy

I hope Diablo seen this video, I got some burglar bars to cut off at a clients house, picking up this blade at Home Depot.

Test if the battery makes a difference between Milwaukee and DeWalt with a adapter ?

That's great, however try using a Port-a-band, they are made for that stuff and the blades last for weeks of daily use if not months. I used a Milwaukee and Porter Cable at various times in 20 plus years fabricating structural steel supports for moveable walls, it's the tool of choice believe me. Nice blade for a Saws-All though

so how does the recip saw compare to a angle grinder for time to cut through I beam

a little oil on the cut itll go faster and keep the carbines sharp longer. I even use a bit on my oscillating tool blades when I have a bunch of nails to cut out run it on medium speed also to keep the heat down