Starting the music just before the segment is DOPE! (imho volume level hit full too early and obliterates your voice on this AND the other Nazgul BnF video)
Hey Joshua :) i have ordered this drone. I am in Eu so i am sceptical about the signal range. I have an avata 2 as well. I flew it 90 meters out and behind a couple of trees and almost lost it due to weak video signal. Is there a way to get fcc mode on the iflight nazgul? And do i need to do that on both drone and goggles3/fpv controller3?
I am interested if GPS Rescue works for your DC5 ECO. I set up GPS Rescue and the quad flys like complete crap. Min. / max throttle changing all the time as well as full pitch up / down every second. I would like to see if that is a generic issue with iFlight DC5 ECO. e
hi this is my second fpv drone and im kind of new to fpv, i think i might of messed up. I watch your video on how to flash the firm ware but im not able to get it into bootloader mode, only DFU FS mode. Also im not able to download the drivers like you did in the first part of the video so i dont have the COM-18 AT32 port. Can anyone help!! Im using mac os
Hi JB! Thank you for another great video. I'm not sure if you have a video about this already out there but I was wondering if you can do one about saving your rates or OSD to GitHib and pointing BF to your own GitHub repository? Right now I have screen shots of my BF setting so when I setup a new quad I do it manually. It would be great to just select it form a list from the repository. And I would know all my quads are setup the same. Thanks!
type "diff all" into the CLI and you'll get the code of all your changed (from stock BetaFlight) settings. You just copy those you want to transfer and paste them in the CLI on the copter you want to transfer to. then type "save" and you're done.
Could someone please tell me how to update Nazgul Evoque to Betafly 4.4 or 4.5? can i use presets of Nazgul evoque v2? Betaflight 2.9 tbs nano tbs BLITZ F722 o3 unit - I bought and used 3 UART for it Thanks!!!!!! I think it is a common question
hi i really need your help, i tried to set up the osd and search for your presets and dindt find so i tried to put in cli because i saw a video you put yourself about parameters, and now, nothing show in my googles, before i did this, i could watch my parameters, help or how can i reset factory this
When I released the video about the iFlight drones in Russian propaganda, people from UA contacted me saying please don't boycott or make a big deal out of it. They say that they are more than able to get iFlight drones and are happy to use them. If we make a big stink about sales to Russia, then iFlight may crack down more on UA sales, which would be bad for them. If you personally don't want to buy one, obviously I respect that. But from a PR standpoint, I don't boycott them.
Can you maybe help me with a problem. So I crashed my Cetus Pro and one Props Protector(plastic)around blended and it stayed like that because of the heat while flying and I don’t know how to bend it back. Because of that it wiggles while flying.🤔
DJI Avata 2 and the FPV controler are amazing its getting me 100% into Hobby mode so I found a sweet deal online for $400 I got the Vortex 250 pro bind and fly kit but, the real prize was about all the other equipment High end chargers and battery's for 1 and half of flying extra spare parts Motor, cam, Proprs (not I understand why this drones are Tough those props is like a weed wacker I've chopped down trees lol) And a Fat Shark Dom v3 (I plan on doing a Rapidfire model update to it I already have a Brand new RM Boxer ELRS m2 and before I get my next Bind and fly drone, and It seems like it should be ready to Plug and Play for SIMS I'm using Liftoff I connect and my PC and the game detects it , but only 3 controller work any tips? (Right now I just want to get the Boxer to able to use in Liftoff Im broke as a joke so between me saving money for my next drone witch might be this one $200 not bad).
When you switch controllers you need to use the drop down menu in your simulator's control settings and select the new model. I only have to do this once and then its plug and play every time until you switch controllers again and need to select your radio in the same menus
Simple question !! From Montreal Canada :) When I charge a Battery on a charger what should I connect first : The balance plug or The power lead of the battery ??
wow, totally confused.. i bought nazgul and O3. and commando 8, just cannot get it working, fpv goggles2 are connected in O3, but this cntroller is total hasle and puzzle.. What to DO ? (edit my first iflight what i bought directly in iflight)
I have a problem with my FPV 5'' self-built copter. Everything is already built and programmed. Without propellers everything worked normally, but during the first test with propellers the copter jumped 50 cm upwards when i gave it a little throttle and turned 180 degrees and fell back to the ground. There was nothing I could do about it. the support from the dealer has no idea either and I don't know what else I can do to fix the problem. Could you help me to fix this problem? Thanks in advance :)
Huuuge help from you! But, i received mine right today, and that's my really first drone... O3 version with TBS crossfire + google 2. But, but.... impossible to find the button to bind the receiver with my tango 2 .... I looked on youtube, forums, iflight guides ... Someone help?
@@JoshuaBardwell Thanks! Unfortunately, my question was even more dump and stupid =) as it is the button itself on the quad to do binding with the tango that am unable to find (haaaa noobs getting into fpv ;) )
i just see 2 buttons, one on the 03 (i haven't tried yet to bind the ggole 2 and the O3, that will come next) and one on the FC, but nothing similar to the sticker that show how to bind... I am like a chicken trying to understand how a knife works (translate from french, don't now with this sentence works too in english ^^)
Hello I have a chimera 7 pro I am a newbie in the fpv is more I have not flown for the first time my drone, I'm learning simulator, and now all about updating and configuration, but I can not organize the modes or I have something wrong in my configuration, because when I arm the engines do not move when accelerating and starts to beep could you help me I appreciate it.
JB has a playlist on reasons why BetaFlight wont arm. First ensure that your throttle is at 0 and the copter is unplugged from your PC :D ru-vid.com/group/PLwoDb7WF6c8n8SCsG7mtIgQUgsuWxaiiO
If you only flashed the elrs receiver, your fine. JB means you shouldn't update the flight controller firmware (BetaFlight). Just flash your receiver and remote on the same firmware (or just enter a bindingphrase via the web interface or even bind manually) there are great vids about elrs on his channel...