Ikea Vesken Trolley Assembly 

Its so hard to put the legs 😭

I almost broke my ribs trying to assemble the legs LMFAOOOO

For those who are having trouble inserting the legs: Note that the three small pins that go in the socket are not perfectly aligned: The one in the middle is slightly more bent. When you insert the part, try to apply some pressure against the socket wall until the middle pin is aligned to the other two. At this moment you will be able to push the leg down as shown in the video.

Thanks to this video i have at least got the first leg to set in. When my blood pressure settles ill have a go at the rest!!😁

My faith was not enough in this assembly project, but with the help of the video I succeeded. Thank you!

Thanks so much, this was driving me crazy!

Make sure you get the wheel holders right way round otherwise the air will be as blue as mine was!!

At last i have put it together. 🎆🎆Thankyou for the video it showed me that it was possible. I did use a wooden mallet to tap parts in to final fitting. I did find it physically hard to push bits into place .

I had trouble making the legs fit in flush without injuring myself so what I did was connect everything as best I can and at the very end took a hammer with a rubber tip and hammered each corner in from the top. That did the trick.

Thank you for this video 🙏

Thank you. This video and the comments were helpful.

Thank you !

Very helpful Thank you.

Thank you. Simple

Ho montato da sola scrivanie,armadi,pensili da cucina e cassettiere. Installo mensole e qualsiasi lavoro in casa faccio da sola e non sono in grado di montare uno stupido carrello ad incastro 🤣🤣🤣

Thank you.😀

Thank you 🥰

thx

Im trying to fix it now. Gosh its crazy. I was able to put only one leg. And I feel enough of it. 😰

Hi can you tell me the exact distance between each shelf? I would like to know if my bottles can fit

3:28 how on earth did you get it to click in so easily? I noticed the other 3 legs were edited out… most likely for censorship purposes 😉

Спасибо,очень помогло. Привет из России.

I have a suggestion, use oil. I used it and was easier.

Try to wiggle it while putting in the bottom legs

hello could you please tell me the outer width of this product , the site says its 18 cms, the space i want to put is 17.8 cm :D do you think it can fit ? Thanks alot

das Teil hat mich halb wahnsinnig gemacht .................................

How is this video helpful at all??????

It look so simple. But it wasn't. Trying to place the legs it took energy and there's still a little gap. 😮I left it that way. 🫤😏