IMPOSSIBLE Floating Spiral Table Build - How Does it Work?

Подписаться 1 млн

Просмотров 231 тыс.

50% 1

In this video I build an IMPOSSIBLE Floating Spiral End Table! To start comparing quotes and simplify insurance-buying, check out www.Policygenius.com/Malecki. Thanks to Policygenius for sponsoring this video!
SQUIRRELLY STICKS ARE BACK - bit.ly/JM_SquirrellyYT
MERCHANDISE - shop.johnmalecki.com/
PLANS - www.johnmalecki.com/digital-p...
SAFETY GLASSES - geni.us/4h6xaM (Amazon)
If you like this video you're going to love these!
IMPOSSIBLE Floating Coat Rack Build - How Does it Work?
- • IMPOSSIBLE Floating Co...
IMPOSSIBLE Floating Table Build - Will It Work? - • IMPOSSIBLE Floating Ta...
IMPOSSIBLE 2 Legged Chair Build- How Does It Work? - • IMPOSSIBLE 2 Legged Ch...
Another IMPOSSIBLE "FLOATING" Table Build That Almost BROKE! - • Another IMPOSSIBLE "FL...
IMPOSSIBLE Floating "Cave" Table Build - • IMPOSSIBLE Floating "C...
Does This Chair Actually Work? My IMPOSSIBLE Chair Build - • Does This Chair Actual...
You may also want to check these out!
HUGE 26 Foot Long EPOXY River Table Bar Build! - • My LARGEST River Table...
I Make a Guitar From BULLETS & EPOXY for Mat Best - • I Make a Guitar From B...
EPIC FIRE & EPOXY Table Build with a $4,000 Slab - • EPIC FIRE & EPOXY Tabl...
CRAZY Epoxy Tree Table Build 🌳 - • CRAZY Epoxy Tree Table...
EPIC Live Edge & Epoxy Reception Desk Build - • EPIC Live Edge & Epoxy...
CRAZY Epoxy Waterfall River Table Build 🌊 - • CRAZY Epoxy Waterfall ...
Proudly Supported By:
Woodcraft - bit.ly/JM2021_Woodcraft
Timberland PRO - bit.ly/JM_TimberlandPRO
PIT BOSS - bit.ly/30Q9AeB
Lincoln Electric - bit.ly/JM_Lincoln
Total Boat Epoxy - SAVE 5% : www.totalboat.com/MALECKI5
My Top Tools and Product Affiliates
Woodworking Tools - kit.co/JohnMaleckiBuilds/wood...
Metalworking Tools - kit.co/JohnMaleckiBuilds/meta...
Favorite Finishes - kit.co/JohnMaleckiBuilds/fini...
My Camera Gear - kit.co/JohnMaleckiBuilds/came...
#ImpossibleFurniture #FloatingTable #CaveTable

Хобби

Опубликовано:

23 окт 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 271

@classicjazztbone 2 года назад

“To the table saw!” then cuts to the jointer… 😂 that’s how my brain usually works, too!

@vrabel1030 2 года назад

I scrolled down to say the exact same thing! Lol

@kurshinburshin9784 2 года назад

Plus 1 on commenting the same thing lol

@robm9772 2 года назад

Beat me to it.

@brianscott3021 2 года назад

That’s what I was thinking

@bg2608ret 2 года назад

Huh, was just thinking I’m glad I’m not the only one who does that 😖

@Lori_M 2 года назад

I would love to see an inlaid gaming/coffee table that flips over on an axis. One side is an inlaid gaming table for chess, checkers, cards, etc., with storage compartments for gaming pieces. The other side is a standard coffee table with built-in cork drink coasters and inlaid place settings (maybe?). Once you flip it to the side you need, have a cool locking mechanism to keep the tabletop steady and firm. What do you think??? Maybe with matching seating? And if you're feeling ambitious, make it for an outdoor setting!

@bclance 2 года назад

You were looking for “rabbet.” Also, I’ve been a fan of the channel for a while, so I’m not saying this to troll, just sharing a faithful viewer’s two cents : I like these builds, but hate when you edit out the acrylic in the thumbnail. Makes it feel really clickbaity and cheapens the actual end result. All in all, sick piece. Hope you and the fam are doing well.

@WesHamstra 2 года назад

I agree

@linkpalmer 2 года назад

I honestly think it would have looked better with wood or steel where the acrylic is, and lean into how weird the table is. The acrylic looks like a last minute addition

@paedahe4975 2 года назад

If only it truly was a floating table. The acrylic kills the look. That being said, it looks good from far away.

@paedahe4975 2 года назад

...and it looks good in photos when photoshopped like in the thumbnail.

@JJFliesAndMakes 2 года назад

Agree, I was thinking about metal frame just sorrounded by wood and big thin metal plate as base. Same principe as street floating "magicians" use.

@hybridmotionjunkuribayashi4913 2 года назад

@@JJFliesAndMakes I had the exact same thought... Except a clear epoxy base.

@Andrewlang90 2 года назад

Well, until we perfect magic, acrylic is the only trick we’d got

@WearyChickenhawk 2 года назад

Love the use of the PAPR instead of a dust mask! Brilliant, but waaaay too expensive for home use, so I'm jealous.

@emmanueleferrarotto2986 2 года назад

"We have never done this before" and "i hope it works" usually make the best videos^^ Like this one Great job all

@matthewwilliams5253 2 года назад

Hey from Australia champ !

@John_Malecki 2 года назад

Hey from America bud

@CreampieSamuri 2 года назад

WHAT IS THAT AWESOME RESPIRATOR SETUP JOHN?!

@McClaw19 Месяц назад

It's a 3M Versaflo

@prestonbowden 2 года назад

John is an artist with the sharpie

@IllGetMyTools 2 года назад

Good work my Man. Your are definitely the flooring table afficianado!!

@Jiiu27 15 дней назад

John Malecki Is Awesome 😎

@ModernBuilds 2 года назад

Third break had me laughing!! Killed it 🔥🔥

@gioazzarello1333 2 года назад

Yoooooooo you need to get Matt outlaw (731 woodworks) to the ranch!

@MCsCreations 2 года назад

Beautiful work, John! Nicely done! 😃 The only different thing I would do is to use dowels for every part, from the beginning! Anyway, stay safe there with your family! 🖖😊

@elc7795 2 года назад

Looks awesome! I wonder if using a sonotube in the middle for the initial glue up would make it easier to glue and clamp?

@wuerfel_schmied 2 года назад

I think with a giant acrylic tube inside instead of the small sticks it would look much better. I know, tube in that size is expensive, but it would look awesome.

@John_Malecki 2 года назад

It would look awesome, and also cost the same as a mortgage haha acrylic aint cheap! You nailed that part

@SpencleyDesignCo 2 года назад

Awesome job on this one!

@buzzboy1000 2 года назад

Very nice! I love your squirrel wood pusher.

@TheWoodFly 2 года назад

Fabricobble lvl 100! I was also thinking clamping a pipe or rod on the inside while carving could dampen the vibration enough to keep it together. Great music selection, good humor and no blood. I'd say another win!

@mattyallwood 2 года назад

That Segway to the advertisement was genius!!!!!

@Ten_Thousand_Locusts Месяц назад

It's segue

@SchysCraftCo. 2 года назад

Woowwers thats cool and unique design. Really like this video series. Love ur videos. Always enjoy seeing what you make next. Keep up the great craftsmanship and hard work my friends. Keep making. God bless. Stay squirrely.

@jmyyer 2 года назад

Love the squirrel push block !

@teejay9373 Год назад

Thumbs up for golden doodles! 👍🏻

@hybridmotionjunkuribayashi4913 2 года назад

My initial thought watching this was, "sweeeet!". Then I had a thought... What if you inlaid metal into the lining of the wood that then connected to an clear epoxy stand at the bottom to still give the "floating" effect? Either way, love the floating series you're doing. Keep up the awesome work

@gagewoodcock2479 2 года назад

Cool Idea and love the channel! A couple of tips to improve the whole piece. 1. Dowels in the original glue up will provide immense more support and make working on the piece easier. 2. Instead of screwing the plexi legs on create a mortise in the end grain and insert the leg as a tenon. Keep up the great work!

@adrianbunge 2 года назад

Could have also used biscuit joints

@tknoerle1451 2 года назад

Love your sawtable squirrel! 😎👍

@b3ardedbarbarian 2 года назад

11:45...a rabbet maybe? Another squirrely yet badass table!

@IdovShai 2 года назад

Amazing! I like your design style

@Maninawig Год назад

"Sometime it sucks to be awesome" will be carved on your tombstone.

@allenpeachy3987 2 года назад

Not trying to be critical, but wondering if there would be a way to attach the acrylic feet without screws. Some kind of tenon end on the acrylic, up into the bottom of the SQUIRRELLY Spiral 🤷🏾‍♂️ ? Nice build.

@John_Malecki 2 года назад

After using the screws I couldn’t agree more haha

@bw110698 2 года назад

he could try running some acrylic dowels through the wood to support it

@Jubjub9000 2 месяца назад

Just when i'm thinking, i bet this guy would be fun to work with, he says "lets chuck some PanterA on and lets rip"! freakin legend.

@jamiekrautkremer7936 2 года назад

Ultimate floating furniture… the floating sofa! Float with friends

@chrisbouchard4780 2 года назад

Time for a new shop chef episode. And many more

@TheGeekiestGuy 2 года назад

It's dope to see John showing that creativity. I dig all the projects but this wacky stuff is nice. Stay safe out there, boys. I'm gonna watch some of the older tutorials as I try and fix the hack job some numbnut "handyman" did to my house. 🤙🏾🤙🏾🤙🏾

@abbypeterson274 2 года назад

An outdoor seating table that has swings as seats and a dynamic looking table that is actually static would be a cool project.

@smalltimeworkshop6537 2 года назад

Always entertaining. Cool build!

@thompsonfamilyhuntingadven4036 2 года назад

Rebate the word or “some kind of woodworking terminology” yinz was looking for was a rebate. P.S my 11yr old said “that’s cool, but weird. And he’s cool and funny, but he’s weird too”.

@josephbelcher6814 2 года назад

Love the table. If you make another one, I think ambrosia maple would look really good.

@John_Malecki 2 года назад

It would!

@ChrisPage68 2 года назад

I dated her in school.

@tootallpaul1043 2 года назад

@@ChrisPage68 Guess what? You're a dad.

@leelatt 2 года назад

Using a cement form tube in the center might have provided support while gluing and shaping up. Then remove after the work is done?

@adicken1911 2 года назад

Can you do a comparison on your old bosch miter saw vs the makita you have now?

@darrinlindsey 2 года назад

What type of jig saw was that, that you first tried shaping the base with?

@wheathinzz 2 года назад

Let’s see the new shop already!!

@wood_steel 2 года назад

great job)

@bubba19816280 2 года назад

Mortise, No a Squirrelybob. Love your work

@SgtOLi40k 2 года назад

Great job John it came out gorgeous. Looks like it was a real S.O.B. but still thanks for the great content.

@MrAustinBaxter 2 года назад

Could you do something similar but inset a steel rod thru the middle by either drilling thru the wood and sliding it over like beads or makeing to curved peices of wood with slots in side to sandwich over the metal?

@exotictones1054 2 года назад

That's cool as hell john.

@user-oz4zg3iw3r 2 месяца назад

best way I've found to assemble segmented glue ups (I do a lot of hexagon/octagon picture frames and cedar bongs) ;ay the painters tape out on the table sticky side up, (fold the ends over to hold it to the table) then lay the segment out on the tape apply glue and just fold it up. the key is the angle, the angles need to be just about perfect. if you want to spiral it to the center you have to keep increasing the angle. e.g. 22.5 to 22 to 21.5 to 21 to 20.5 to 20. I'm not sure of the exact angles and how many of each you'd need. guess that depends on how tall you want it and how fast you want it to spiral to the center.

@spencerklaus6648 2 года назад

Make a video on Purple Heart and the best techniques for working with it, planing/sanding/sealing etc!

@ryangreen3841 2 года назад

Love u man keep it up

@timmanus 2 года назад

Why did you get rid of the Bosch miter saw?

@fdort3971 8 месяцев назад

@JohnMalecki I'm going to reference chocolatier stuff here...if I want to make a fragile chocolate bowl...the first thing I do is blow! I use a food safe balloon and blow it to the size I want. I figure out a way to support it...then make and pour the chocolate on the balloon...once the chocolate hardens...very carefully pop the balloon and pull it away... In your case...your balloon could be a parchment paper covered cement form...to make it more structurally sound...do hidden dowels in every piece...less blow out!

@carsonbigford9012 2 года назад

Would a dowel or pin glued in have helped?

@devmandavia1469 2 года назад

Amazing build. Curious, what was the purpose of lighting the acrylic on fire?

@CaraesNaur 2 года назад

To smooth it out for a crystal clear surface. Much faster and more effective than sanding, buffing, and polishing.

@angrymater13la 2 года назад

I would love to see that style doing in a torched finish

@bg2608ret 2 года назад

Guys I really enjoy your videos, some better than others, but there all good.👍🏻

@BMOORE344 2 года назад

Damn, looks awesome!

@denisj32 2 года назад

amazing👍

@ItsAlex-aj 7 месяцев назад

Hey, newbie woodworker here, i just got one question.. how did you account for wood movement for the top? As far as i read online, they say you should never attach a top so snug.. anyway another GREAT creation from you!! You inspire me so much!

@mikemiller9061 2 года назад

Everybody has that one piece they put a lot of work into. And they realize it was just a bad idea. Lol

@John_Malecki 2 года назад

Dude, i do it all the time hahahah

@gospoda2 2 года назад

A center steel post to a base would have been sweet as well. Then just have that carved wood floating just above.

@paedahe4975 2 года назад

Rebar bored through the middle of the wood section, hidden by a invisible spiral joint.

@nolanstevenson3510 2 года назад

Rabbit maybe for inserting the top. You would have been good just saying a recess

@levibaker4587 2 года назад

That's what I was thinking

@John_Malecki 2 года назад

Yea that hit me after thinking hahah good call

@benengel1687 2 года назад

Rabbet lol

@seanmullenix7448 2 года назад

I might try this

@Jiiu27 15 дней назад

I Love These Videos 🐉💖🐉🖤

@kindalost1 2 года назад

🔥🔥Floating lamp

@AB_in_CO 2 года назад

You guys are crazy cool. Took another risk and it paid off because it is outside the box and awesome. Question, what is the reason to burn the acrylic?

@watermelonbleach 9 месяцев назад

Nobody answered you in a year? I believe its to make the sides clear instead of frosted.

@matthewchristensen9384 2 года назад

You guys should make a pool table

@23demolitionderbyman 2 года назад

rabbit for the top is what you ment I believe sir Squirrely Squad ASSEMBLE!!!!

@colinpeake6612 2 года назад

Nice build guys. I think the lumber you're using is ash.

@alexanderkessels5254 Год назад

Could you build it around a large cardboard tube for initial stability so that when you clamp it there is an opposing force other than the small face of touching pieces ?

@mitziseyfferdt3866 11 месяцев назад

Tensegrity rocking chair 🤩⭐️

@Customwoodfurnishings 2 года назад

Does anyone know what type of wood that was?

@tturi2 2 года назад

Halloween themed cave furniture btw that table would be awesome with a matching base spiralling to the top

@codynelson5302 2 года назад

Hey John! You should make a hidden compartment drawer!

@billdiehl156 2 года назад

Hey Jordan. Did you do anything to help in this project except hand John pieces of wood? Well done.

@TOTHEPOINT82 2 года назад

I feel like"Woodworking Terminology Groove" is some type of T shirt opportunity.

@warrenmunn3224 2 года назад

Building the shape around a disposable container/barrel and doing the external carving while the barrel is inside, then just cut/destroy the barrel to extract it.

@anthonyraye5831 2 года назад

I think you should make a place we’re to store your golf clubs in the winter... and make kick ass like you always do...they have some on the market by they are Junk and don’t hold all the stuff like shoes umbrellas extra clubs shag bags... you’d crush that

@shadowhawk1st 2 года назад

Couldn't you insert dowels between each piece as you go for stability?

@linkpalmer 2 года назад

What about a winter outdoor bench with built in seat warmers/space heater, sponsored by pit boss?

@midnightsun2010 2 года назад

3x3 Custom Tamar made a 3way bridle joint in a video not too long ago. You should try to make one and then incase it in the center of clear epoxy for a side table of some sort. Metal legs would look cool too :)

@J3DGamer Год назад

Would using a biscuit on that part that keeps exploding work

@AlexanderElse 2 года назад

Did you think about joining the acrylic to the table using tenons? Would it work for this project? I think it'd look good to have the acrylic disappear into the wood rather than be offset and attached with screws.

@John_Malecki 2 года назад

I agree Alexander. My original plan was to mount them to the top, so i didnt think of morticing them in, but if i did it again i wouldve slotted the swirl somewhere for both.

@AlexanderElse 2 года назад

@@John_Malecki I should've read the comments. Someone else already asked the same thing. Love your work.

@Icer73 2 года назад

If your wanting to find out more on how to do the segments. I suggest watching or even trying to get ahold of a fellow RU-vid called “Frank makes”. He does quite a few projects with segmented pieces. For example he made the Death Star, an eye with iris. Just to mention some. Hopefully that helps out a little bit for future projects

@himynameisjeff Год назад

This would have been just as cool if you put a post in the middle with some kind of base, and more stable. Either way, super cool. Definitely gives me some ideas

@theimpulse77 2 года назад

I bet a foam cylinder could've been used to support that spiral enough to rough out that line with the jig saw. Not sure if you could find that foam cylinder, but a sheet, cut and turned would do it.

@mikescombatgames 2 года назад

I’m still interested to see a tension floating dining room table. 👍😬

@uniqko 2 года назад

good

@farmgrowncountrystrong 2 года назад

First thing I thought: This guy really likes his floating furniture. First thing he said: People say I have a weird obsession with floating furniture 🤣

@John_Malecki 2 года назад

It’s a fun way to get creative and think outside the box.

@farmgrowncountrystrong 2 года назад

@@John_Malecki I agree!

@cashkruz319 2 года назад

Would using dominoes to connect all the pieces have been necessary for a stronger structure? Would that be overkill? I was wondering that as you were building, then you added the download the arm. I'm a total novice with wood working, so just curious. Either way, I second your obsession with the floating furniture and can't wait for more.

@Lori_M 2 года назад

I was also thinking dominoes. Glad I wasn't the only one!

@CipherNL Год назад

Use round acrylic tube, it's harder to see. And use acetone instead of fire to get cut edges clear.

@jordanchambers1265 2 года назад

I was hoping for a better looking support. Maybe like plywood or what not secured to your leg through a rug or something that would keep you secret. Not sure what securing method I would trust my coffee cup to, but nice work

@007naumankhan 2 года назад

I think to avoid the breaking try to use dowel or biscuits or something similar to keep them together.

@RunarMagnussen 2 года назад

How about a floating work bench!

@austinrogers8058 2 года назад

I could listen to the riffs you use in your videos on shuffle.

@connorlane8552 Год назад

Would have been cool to have a long acrylic rod going into the bottom of the top down to an acrylic bottom in my opinion, would have been nicer that the little rectangles of acrylic. Do like the setting it alight thing tho

@seanbenton7447 2 года назад

Why did you use pegs between each joint?

@BulletWulf 2 года назад

Please recreate your first tensegrity piece, but updated. It'd be a nice little throwback. Using stronger cable, and off-setting the triangles by 60 degrees. Have the outside wires either angled outwards from the centre beams of the base towards the vertices of the top panel, or from the vertices of the bottom panel towards the vertices of the top panel (so each of the 3 vertex has 2 cables leading to it)