Impossible Table Saw Turning | How to Video 

Dude, the way your brain works is amazing. I woulda never figured out how to do that

What a great way to make wooden churros.

The jig is simple but I was trying to figure out how you'd control and rotate the piece the same amount with every pass and couldn't come up with anything. Your solution is brilliant.

Finally! A craftsman that engages with the audience, settles on the salient points, admits minor mistakes and moves through the steps at a speed which allows newcomers to the craft a doable entry point. Well done! I look forward to more!

This is why I subscribed to this channel in the first place: to watch you do impossible (insane?) things with this table saw. Mostly I wanted to see how you got the twist in there for this one. I was not disappointed!

What great skill. It's excellent to see someone making something just for the interest of wether or not it can be done and from a viewers perspective being able to appreciate the process. No politics, no shouting, no anger just creating. Perfect.

Amazing. The simplicity of this idea is just flabbergasting

Creative misuse of power tools at its finest! The guy who developed the table saw is watching from the heavens, saying No! No! That's not how it works! And then why didn't I think of that.

Dude, You Knocked this one Right outta the Park! Outstanding No Joke, People used to spend Thousands for The Legacy Oriental Router Lathes and You just pulled this one off on a Table Saw !?!?! First there was that Bowl Jig, Then The Table leg jig. But this Spiraling? KaBoom, Izzy Kills it again! Fantastic Dude absolutely Fantastic! Thanks Bro

I'm impressed, very innovative. Started me thinking of turning a pair of wooden rotors for a Roots Blower for a forge.

Next: How to make a spaceship with a table saw

You really should get dust collection. It's not about the mess, it's about the air borne particles that will give you cancer. The mess management is just a benefit. Made A HUGE difference for me. Not only did my garage not have a permanent dust coating, I wasn't coughing dust up or blowing wood paste boogers out of my nose the next few days.

Izzy, the board you run the screwdriver along is called a sine bar. The same process is one of the ways gun barrels are rifled.

You know he’s a master carpenter when he says this is pretty simple to set up, when virtually non of us could do this. You’re awesome.

Really cool!, but could hardly hear you for the music dude. (at the end).

Ok, so what is that supposed to be and for what purpose?

Come on people, there are over 400k subscribers, show some love and like his video.

You're like half a step away from a wooden worm gear

Hi izzy. I don't post much but I do want to say is sure is nice to have you back, in form, and posting cool videos again. Thank You :)

Is the "music" necessary? It really is distracting and annoying. Otherwise, very good presentation of a useful technique.

This is a great technique. Would be awesome to use for stool legs and maybe skip every other groove

Excelente maestro Grrasias por su conocimiento desde Nicaragua

Fantastic Izzy !!! Great talent and imagination . Looking forward to see more of your work and ideas . Thanks !!!!!!

You clever Mo’fer !!!! Awesome

you are an amazing carpenter!!! enough said!!!!

Cool jig. The result is pretty cool. It's not a shape you'll need very often. But when you do, it's nice to know a way to make it without a 4 axis CNC. Also, your voice has been really low volume in a couple recent videos (including this one).

You got me with the “impossible”....

Well, that is a new way of twisting something! You always have some twist or another to your work. Totally awesome! As others have already said...you have a pretty neat brain for this stuff. She's a thing of beauty.

It looks like a great start to a lamp build. Nice work Izzy.

Hi there, nice one Izzy. One thing thou, is it just me or the volume of background music on good portion of your videos is too high in regard of your voice over....?

Hey it’s back , now I can watch it

You should use a light and dark stain for each cut, alternate it so you get a barber poll effect.

Hey Izzy, the stuff you come up with is nothing short of genius. No kidding! Big fan of yours. You keep making them & I'll definitely keep watching them.. thanks for sharing bud 😆

WOW, you just made the worlds first wooden lawnmower blade...now let's see the rest of the lawnmower :) Brilliant

You have an amazing gift like no other

everything was cool, exspecially the Piece xD but just for ur own benefit I would say that at the end ur voice was too low compared to the music, soo maybe higher the volume up while lowering the music,but watch ur video for urself and estimate for u ;) Again, awesome!! got cool ideal for myself as well 😉

You've just made the main shaft of a lamp stand. ;)

looks great but supper hard on the blade. why not just use the same jig with a router?

Hi, what is the name of the drill/counter sink you had in your drill and where can I purchase one? Your work is incredible by the way!!!

Before there was CNC, there was sheer ingenuity! Brilliant stuff as always, Izzy.

Cool project Izzy! Thanks for sharing the video.👍😎JP

Speaking of dust collection, are you building one? Alot of videos are out there with self build propellers but they all build their fins by wood but I think it would a great idea to use a huge plastic pipe (I guess something around 20inch) for the fins of the propeller... I don't know if you guys have them as we have them in good old Germany ;)

This is so stinkin' cool, Izzy! Thanks for sharing.

Great video and project. I have no idea what you said towards the end though, the background music drowned you out.

glue 2 halves that have groove down middle - lamp stand .

Can't hear your voice for the music.

Hey Izzy that would be a great set of coffee table legs...just think what they would talk about when seeing the coffee table with those legs...

Not that great, uneven all around. But like you said it was just an experiment.

"As The Cove Turns"

Om te zeggen dat ik in shock ben, is om niets te zeggen. Izzy je zoals altijd verrast.

How to make a wooden churro !!!

Pretty awesome Izzy! That "turned" out great. I am certain that you have done something similar in the past, way back when...................... :)

That's a neat trick. I wonder if you fit into a pvc pipe and spun it with a motor or drill, would pump water?

one way to cut coves faster on a table saw is to use a wobbler daddo blade. cool project.

THANKS FOR THE AWESOME IDEAS & HOW TO HANFS-ON CRAFTSMANSHIP !!! 🔥😜😎

Clever. Very clever. It's simple enough to do, but looks complex enough to be a fine table leg or cabinet support. Also, excellent tutorial. I liked the information you gave, describing all the parts, how they work, and the process itself.

Sick ....as usual and expected.

Very cool, very instructive, well done in every way. I had no idea you could do this with a table saw. Brilliant. Thanks for taking the trouble to vid, edit, and post. Top marks!

You know what else gets you views? Secret compartments/passages. Also, I'm working on a secret (not secret) passage now, so it'd be really cool to see your ideas.

people that think outside of the box 😎👍👍 f#@*&ng awesome dude.

That's actually pretty cool, Don't know what they could be used for, but still cool.

It's a giant churro! Love it!

Izzy, I watched this video a few months ago and was so impressed that I actually made my own table saw just to try out this awesome project. I’ll mention you when I make my video (April 2021) thanks for sharing........ Know Expert......

That’s a really cool idea. I think that would make for an awesome lamp if you were able to drill through it for the wiring and then make a base for it.

إِنَّ فِي خَلْقِ السَّمَاوَاتِ وَالْأَرْضِ وَاخْتِلَافِ اللَّيْلِ وَالنَّهَارِ لَآيَاتٍ لِأُولِي الْأَلْبَابِ Indeed, in the creation of the heavens and the earth and the alternation of the night and the day are signs for those of understanding. الَّذِينَ يَذْكُرُونَ اللَّهَ قِيَامًا وَقُعُودًا وَعَلَىٰ جُنُوبِهِمْ وَيَتَفَكَّرُونَ فِي خَلْقِ السَّمَاوَاتِ وَالْأَرْضِ رَبَّنَا مَا خَلَقْتَ هَٰذَا بَاطِلًا سُبْحَانَكَ فَقِنَا عَذَابَ النَّارِ Who remember Allah while standing or sitting or [lying] on their sides and give thought to the creation of the heavens and the earth, [saying], "Our Lord, You did not create this aimlessly; exalted are You [above such a thing]; then protect us from the punishment of the Fire. The holy Quran -Sourate Aal-E-Imran, Aya 190-191

Just tried this for the first time. Wasn’t nearly as good as yours but, I learned a lot and I’m going to start again. Thank you.

Izzy Churro!!! This is why you shouldn't woodwork while hungry. :P Next up, Table saw Tacos! Where's Birkey?

Looks like you could apply this to a shaping table, or router table for even more options.

Brilliant izzy thank for sharing such a great idea. Tony from Canada 🇨🇦

Wouw....its very good....🤩

I suppose someday we'll be able to 3d print a wood-like material and this will be super easy

love this. great project but the music was too loud and somewhat distracting

I've been trying to do this but with Sapele hardwood, it always gets "stuck" around 8 inches in, like the blade just stops cutting. I don't know what's causing it. Suspect I need to tilt the blade a bit toward the piece so it can actually cut with the top of the teeth instead of the sides.

Awesome work, I like it. Thank you.

I am Carpenter, but I really surprised, wonderful work, we learn everyday, thanks man,

Calculations are the key ......... amazing piece of work

the jig for the perfect turns is AMAZING!

Clever! And no, not impossible at all. Your videos are great all on their own, avoid the clickbait trends, and then no need for apologies. :)

I will try this because, like you it just seems like a fun thing to try. Thanks for the inspiration!

You re-invented the sine bar... good thinking now on to the first wooden rifle barrel ;)

I did know how I found this video, but I liked just after watching the intro! Going to start checking out the channel

Super sir good work

How is the angle changing when you push it ? it's clearly not linear. Looks like it's something like the tan function around 0. The series expansion of tan(x) is x + x^3/3 + 2x^5/15 + O(x^7) so I guess it's close enough to x...

Thanks for your video and for giving us some ideas and techniques.

Serious wow factor, Izzy - impressive, to say the least !! :D

Looks like a Twizzler! Awesome!!

I think you can do this and make a worm gear for a drive

Only Izzy can do the impossible with common workshop tools!!

Hey, Could I ask what type of bluetooth ear buds you're using? Nice work, Great idea! Thanks

una observación...al hacer trabajar la Sierra de forma diagonal (por decirlo asi) estás forzando su desempeño de una forma incorrecta... podría desde dañarse hasta un accidente fatal...de mi parte es una recomendación, quedará a criterio quien arriesga su integridad por obtener una espiral de madera...

Nothing you do is simple Izzy! Looks great.

Why do I have a craving for a cinnamon churro now ? Umm super size churro mmmmm

Спасибо за работу и идею, как говорится все гениальное просто!!!

you are the greatest wood artist on planet ❤️🍀👍

Well! I certinly enjoyed this video; I always am looking fr someone to give me a challenge! Ive done coves quite a bit; and beause everyone said "WOW", I thought I was h---- sh------. So thanks for taking me down a notch and putyou up a couple!!

I actually made it and it’s awesome. Thank you so much for sharing. I’ve called it The Izzy Twist

Não ficou tao igualzinho nao houve diferenças de largura e profundidade!!!mas valeu mesmo assim!!!!

Damnit Izzy! You're going to owe me a finger one of these days... ;-] Well done.

Como cuando se te acaba las pocas ideas, y decides joder el disco de la robland

Paint one spiral alternating Red & White. You have a Barber Pole. You have a Candy Cane; Green & White , Yellow & White, you have candy canes, different 'flavors'.