No video :(

Improve Sound! Precision Acrylic Speaker Adapters - HOW TO

Подписаться 786 тыс.

Просмотров 252 тыс.

50% 1

Installing custom speakers? You need custom adapters! Here’s my process for creating high strength rings that retain OEM features for optimal sound quality for a car audio installation.
▼ Krystal RCA wires, power wire and more from show sponsor KnuKonceptz!
➜ www.knukonceptz...
▼ Tools and Materials:
➜ Acrylic amzn.to/2B8mIzo
➜ Flush Trim Bit goo.gl/GmZzYN
➜Circle Templates goo.gl/mbqw7H
➜ Router Push Block amzn.to/2TisFkd
➜ Router Shield goo.gl/HNtF8G
➜ Speaker Gasket Tape: amzn.to/2UAiRTd
➜ JK Tapes: goo.gl/eEzVQB
➜ Hole Gauge amzn.to/2TjLQdD
➜ Transfer Punches amzn.to/2MFo3SP
➜ Taps and Drills Set amzn.to/2Titnhn
➜ Center Punch amzn.to/2CRt7iB
➜ Acrylic Router Bit goo.gl/im2SQP
➜ Drill Guide amzn.to/2sV7VmY
As an Amazon Associate I earn from qualifying purchases.
🔊 Want more? Check out these links:
✅Car Audio Tutorial Library: bit.ly/CAFlearn
✅ FREE weekly training program: bit.ly/CAFlist
✅ Box Designs, BUILD YOUR OWN BOX!: bit.ly/CAFdesigns
✅Join the CAF Patreon Member Team: bit.ly/CAFpatreon
🔊🔊🔊 FULL VIDEO SERIES PLAYLISTS:🔊🔊🔊
- Ported Downfiring Subwoofer Build: bit.ly/CAFdown...
- Dad's Sound Quality Daily Driver Build: bit.ly/CAFdadsSQ
- SEMA F150 Subwoofer Box Build: bit.ly/CAFf150
- LOUD Wrangler Build - bit.ly/CAFloud...
- SQ Grand Cherokee Build - bit.ly/CAFgran...
- Stealth Hidden Bass SQ Build - bit.ly/CAFstea...
Here at Car Audio Fabrication I teach you how to Master Car Audio in an effort to Design, Build, and Install your ideal car audio system. Whether you are a hardcore basshead or a HiFi focused audiophile I would love to have you subscribe and join our community!
-SUBSCRIBE-
www.youtube.com...
--LET”S CONNECT!-
Website: www.caraudiofab...
Facebook: / caraudiofabrication
Instagram: @caraudiofab
Snapchat: @caraudiofab
Music:
Sunspots - RU-vid Audio Library
Licensed under Creative Commons: By Attribution 3.0
Use of information from this video is at your own risk. You MUST view the full disclaimer here: www.caraudiofab...
Car Audio Fabrication - Master Car Audio - Design, Build, Install

Опубликовано:

28 янв 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 355

@vinyfiny2019 5 лет назад

Saw that little hand and started cracking up, made a scene at work. Thanks a lot!

@CarAudioFabrication 5 лет назад

Little hand? ;)

@geeaye64 5 лет назад

Lol

@catastrophic3 5 лет назад

Yeah that was funny

@mandycowey7635 4 года назад

That's it. I need to get myself a routere

@BrandonDailey 4 года назад

I cracked up so hard when I saw that!! 😂😂😂

@bablobhai 5 лет назад

oh man the amount of effort and love you put into setting up an audio system is commendable!!

@CarAudioFabrication 5 лет назад

It's definitely a ton of work, but the results are worth it! And even though its hid behind a panel, I want to know it was done right. Thanks for the nice comment.

@bablobhai 5 лет назад

@@CarAudioFabrication I'm 100% sure the results are worth it.. checking each and everything for rattling or any other kind of noise sure is hard work.. you truly know what you're doing.. keep up the great work..

@AB-80X 5 лет назад

@@CarAudioFabrication It's all the work that makes a proper install look so "easy" and simple. I can't remember the number of times over the years where somebody has seen something I've done to integrate a speaker or piece of equipment into an installation, and then ask, "Oh cool. Could you perhaps spend a minute and whip one of those together for my car?" It's usually followed by awkward pause, lol.

@elsalvadoraustralia4074 4 года назад

PLEASE BROTHER DO MY CAR👊👊👊

@AnthonyDMolinaro 2 года назад

@@CarAudioFabrication Might be a dumb question, but is there a benefit of going 6.5 with a separate tweeter vs going with a full range (3 way) 6x9?

@dellarnold5249 4 года назад

You put in a HUGE amount of both TIME and DETAIL when doing your installs and fabrications. That shows quality work.

@PGeoffLenoir 5 лет назад

I started out back in 1992 reading every magazine I could in order to learn as much as possible about car audio before I got my first car and adding a system. Got bitten by the bug and for 8 years I devoted my life to car audio. Time changes all things yet after watching several of your videos I would love nothing more than to take some fabrication classes and possibly get back into one of the single best hobbies (only second to RC cars) I'd ever been involved with. Your attention to detail and the fact you understand that button head hex screws are the best looking screws even though they will never be seen again (if all goes as planned) and that you make sure all your edges are standalone show quality is inspiring. Pride in ones workmanship is missing in today's society. Thanks for the truly inspiring videos. You're the Chip Foose of car audio IMO.

@littlejohnnymiller3465 4 года назад

You are one professional dude. It's nice to see someone who builds it all together and not just throwing it out there.

@superwiseman452 5 лет назад

This guy is a pro -- excellent router work, and very safe. you do not want a hand in a router bit.

@moreaudio760 5 лет назад

Love these types of videos ...from novice installers to veteran installers ..we all appreciate the techniques you demonstrate on your videos ...

@Vodnik110 5 лет назад

I lost it when I saw the tiny hand lmao

@stephaneggy 5 лет назад

me too haha

@Jesusprayerwarriorbw 4 года назад

It's a great running gag!

@rxchrollxn7814 4 года назад

😂😂😂😂

@marcvought 4 года назад

Always hilarious. And he never broke carricter. Great.

@wesjacobson6675 5 лет назад

Great timing! I’m just getting ready to install two sets of 6.5s in my Tahoe. Thanks Mark! Love the humor you throw in!

@6980869 5 лет назад

I literally laughed out loud when I saw that creepy little hand come into the frame. For anybody who is new to using routers, it’s worthy of noting that if you do flush trim or template cutting/pattern cutting, you’ll want to pre-shape the pieces with a jigsaw/bandsaw, just as he did when he went to do the acrylic piece. Less material to be cut away means less strain on the router motor, which equates to longer lifespan of the tool. Another similar practice that helps increase tool lifespan, is to cut less than the full depth of the workpiece in one pass, by breaking it up in increments, cutting a third or half of the thickness of the material to be cut away on each pass. Great knowledge included in a great video, thanks for sharing it. Aloha

@gregoryblair9810 3 года назад

I have done many speaker changeouts over the years, and am amazed that I never considered external sources of rattle. This is an "a hah!" moment. Thank you for improving my future speaker exchanges!!

@gronvall3364 5 лет назад

How can people disslike this? Jealous? You are absolutly the best car audio builder on youtube!

@adriantrain2037 5 лет назад

You can really tell you're good at this stuff because you make it all look so easy.... Nice work mate...... I will definitely subscribe as I learnt a lot watching this. I used to do audio installs about 20 yrs ago, nowadays I just do it in my own car or helpmates. Yrs ago I did an install on my girlfriend's car, her brother purchased all the same stuff to put in his car that was also the same as hers. She complained because it took me 2 days to do hers and her bro had his all up and running in half a day... But like I said to her, I can do a half ass job like him and it would all work. About 1 month later his started shorting out and sub box was falling apart an it really looked crap. Hers run without for many yrs after...... My theory is, take your time and do the job the right way the first time....... I'm still the same today, I can't do a half assed job, research and install once and do it right the first time..... Thanks for putting the effort into filming your work...... Top job 👍👍👍👍

@justinmurphy2227 5 лет назад

I have to really hand it to you Mark, you really thought this one out! When most would have given this challenge the finger, you just went for it and got it done.....high five to you! Hand puns anyone? That was HILARIOUS bro! Great work as always too.

@ronjlwhite8058 5 лет назад

Cant wait to see what Doug does with this one LOL!!! Your fab-kitchen is friggin SWEET!!!

@awatw.micheal9289 2 года назад

You don't have any idea how much you help me with every video you make, as I am New mobile electronic Student I love you mark. Thank you so much MARK you make it easy my try.

@Lo_649 5 лет назад

Hello, you have a lot of great video's on the channel. Can you please make a video on installation safety tips? It seems like everyone has installation tips but no safety tips on how to prevent fire and shorts and what can cause them. i think it would be a great idea for many views.

@the-divinehammer 3 года назад

Best car audio diy videos by far. You have to want to be perfect to appreciate it. Like the Lil hand too lmao 🤣 was a surprise.

@ronaldo111111111 5 лет назад

I should’ve payed more attention in my high school wood working class lol. Great video, Mark!

@CarAudioFabrication 5 лет назад

The good news is there are plenty of woodworking channels and information out there, it seems much more useful now than building a birdhouse right? :)

@AB-80X 5 лет назад

On top of what Mark said, also remember this. If you acquire some essential tools, which include a router and a jigsaw, you can go a long way. Yes, you do need some things to start out with, but remember, you don't need the latest and greatest in router lifts and tables. You'd be surprised at what you can find on the used market if you look for say a Jessem lift and table. The bits are important though so don't skimp on those, and a bunch of basic templates are as well. But you will also be able to create your own templates over time. Every time I've done a template in MDF or another somewhat durable material, I keep it, so I got a lot of interesting odd shapes, and circles in just about any diameter there is. But the important thing to remember is this. Wood is pretty darn cheap. When learning to use your router and jigsaw, you can use so many things. You don't need a nice piece of MDF or birch plywood. Get the cheapest sheet wood you can, boards as well. Anything you can cut, route or sand etc. Go to town on that stuff, make shapes, use templates, do freehand. You'll be surprised at how much skill you can pick up just by using your tools, especially if you combine that with watching some good videos about wood work. Good luck.

@JacobFrey 5 лет назад

Aww, your tiny hand. LOL

@loveneetbhardwaj5180 5 лет назад

K Frey

@hawkie333 5 лет назад

Very professional work! Excellent attention to detail, you could have cut a lot of corners.

@LTZ_Z71 4 года назад

Your work and expertise is on another level. I've thoroughly enjoyed watching this series. Well done sir!

@kenworth3236 4 года назад

Your work is Second To None Mark.. Cant wait to watch Your tweeter placing and fabrication video. Thanks

@johnnyhotrod 3 года назад

Why can’t this man live near me Super meticulous work,love it!

@Mrcaffinebean 5 лет назад

I like KnuKoncepts. Their kits are reasonably priced and not junk like a lot of kits.

@stercan 5 лет назад

Your work is so clean, it makes me scared to start :(, my KRX 3 installation

@CrMo4130 5 лет назад

When I saw that tiny hand I spit sweet tea all over my monitor at work! Ha!!! That was great...

@bigadventure3797 5 лет назад

Nice speaker adapters! I had my installer use Starboard and YES they made a big impact on sound quality. I also completely sound proofed the doors using Dynamat and added BlackHole acoustic tiles in the door cavity.

@cinthymclean5381 4 года назад

Man you killed me with the baby hand😂. I love your content bro. Big ups🙌

@2Fast4YouCL 5 лет назад

You are a very good teacher 😬

@towinglegends5815 Год назад

Yo you got me with that little hand thingy. ✋️ 🤣 🤣

@toddscott3499 5 лет назад

Amateurs have a router table... professionals have a router bench! Slick setup w/3 routers in a row for your most commonly used bits. BTW nice touch of humor slipping the baby hand in there. Although, you went to way too much trouble for something nobody will ever see, the spacers are a work of art.

@CarAudioFabrication 5 лет назад

I know it's there and I accept nothing but the best from myself. Don't really care if others think it's "too much" it's my own standards I look to meet.

@ChuckTaylorSA 5 лет назад

The hand reminded me of scary movie 2. "my germs"

@jonanderson4474 5 лет назад

Take my strong hand.

@ToughGarage 5 лет назад

I'm sure one day your going to find the cure for cancer in that workshop of yours. Crazy organisation and layout. Love it

@tallnrough68 2 месяца назад

Top notch work. Routers are awesome tools

@tekdek4u 5 лет назад

Tiny hand made me laugh lol, awesome vid! I really enjoy how detailed you explain everything!

@drm9979 5 лет назад

absolutely beautiful work. I do not have anywhere near your skills but one thing similar I do is whenever I remove a panel or anything in my car, I do the tapping everywhere and deaden everything. So it was cool to see that it was not just me, and if you do it, then I know it is the right thing to do. wrapping the plastic fasteners was a new one though I have padded them with silicone gel. anyway, the videos are awesome..

@1marcelfilms 2 года назад

With all those specialist tools work must be FUN

@NathanClevenger1337 4 года назад

Damn,... watching these videos is making me want to build a router table.

@bigbopper1793 5 лет назад

Man your work really hits the heart. professional . I aspire to make systems like you. The correct way . Cool stuff with the acrylic.

@WES-JGC-2013 Год назад

Truly a perfectionist!! Brilliant awesome work!!

@JayKayNg Год назад

Your work is exceptional by the way.

@Muuuzzzi 4 года назад

Beautiful workmanship.

@glennbaxter7254 2 года назад

Excellent video - love the mini hand!

@josea.garcia3994 5 лет назад

Very very awesome job Mark!!!👌👌👌 You made that job look so simple and easy!!! Everything came out looking perfect!!! Great video!!!👍👍👍

@Arestas25 5 лет назад

This is real commitment to make a quality product. Congratulations 👌👏

@mistercohaagen 2 года назад

I'm about to give this a shot. Thanks for the inspiration!

@wite1pwrSS 5 лет назад

Looks great so clean my favourite part of your builds is the tighty finnish

@larryiguidez4072 4 года назад

Your work is so intricate and its hard to copy it DIY. Very good

@dastuff7136 2 года назад

The little hand took me out😂😂 @5:55

@minivanin 5 лет назад

Holy hell those adapters came out swell. Nice work! Id buy a set if I had a situation that would use them.

@joseluiscampos4265 5 лет назад

Y pues claro que es un muy ilustrativo video gracias por conpartir tus conocimientos

@steveb4810 4 года назад

Very meticulous craftsmanship ... I would do the same if I had your workshop setup! Please come to Virginia and upgrade my 2019 Tacoma’s system!

@TheTecatemn 2 месяца назад

Very nice work !!! Kudos!!

@ashokvachheta2967 4 года назад

Mark ..your work is impressiv. I like it...

@victoryvisiontour 6 месяцев назад

You are very detailed. Nice work.

@_BangDroid_ 5 лет назад

Workmanship over 9000!

@GlubschiaugLP 3 года назад

Lost it at the tiny hand! I like that humor :D

@AgentFoxMulder1972 2 года назад

A very good professional job!

@MegaCountach 5 лет назад

Nice work Mark! You should mention in one of your videos about router bit bearing screws backing out.... It has happened twice with me when cutting aluminum and destroyed my work pieces. I have found that using blue loctite on the screws prevents it from backing out. Cheers, Doug

@tamerelnady 5 лет назад

As usual too much useful info, ideas and a tiny hand 🤚 we can call this a high end adaptor, it’s shame to hide this beauty work with a door panel. Thanks Mark.

@exclusiveservice 5 лет назад

very well done transition plate and very neat, better than the factory.I like it

@realhusky 5 лет назад

You should check speaker fitment with the window down in case your vehicle's window will impact it.

@perrry100 5 лет назад

He did he said that he checked to make sure the window cleared

@marcosstr 5 лет назад

Nice job as always man. The factory speakers were not half as bad as the usual cheap ones found. I would leave in MDF, those acrylic pieces are really expensive here, and I`m always in a budget LoL.

@alejandroperez5368 Год назад

MDF cracks and absorbs humidity.

@gildardo 3 года назад

So this is how high end audio is born. Neat

@Camoburb Год назад

LOL...love the little hand!

@chefd9002 5 лет назад

You always work with the best of the best gear and products

@AntonioHernandez-ml5mz 5 лет назад

The second that hand appeared I pressed like, I came here for education on fabricating which I got, I also had a right laugh! Excellent 👍🏼

@arinmastalski 5 лет назад

Damn that came out bad ass man you got a hell of a set up in ur shop too

@RayAnthonyMichaud 5 лет назад

Man, I am so glad you have made this series videos. I just got a JGC and I definitely want to upgrade the sound system. I have started this week to purchase my components one by one. My Pac audio just came in yesterday and since then I have been watching your build. If you were in the tri-state area I would just hire you to do mine lol great videos A+++

@valentinmanso1532 5 лет назад

Can’t wait to the next video!!!

@kwonpae-corr4300 5 лет назад

love the little hands

@danielgurulee12 4 года назад

Great video the little hand great one haha but that build man looks,, dope very nice

@kendavis3604 4 года назад

Very informative, and well produced. Thanks you very much. I guess I need to invest in some router accessories!

@bn6755 4 года назад

Excellent work, very nice and clean.

@edwinsimon3578 2 года назад

Clean and precise

@tomlally8561 5 лет назад

That JK tape is awesome stuff, better than the Tesa. Jeremy knocked it out of the park with that stuff

@tuncohighway7922 4 года назад

just another nice and clean job!!! keep it up.

@ljaysperspective1775 3 года назад

Sweet looks great! Nicely done.👍

@paweljakalak4810 5 лет назад

Great clean professional finishes.

@tanishqmadan4676 4 года назад

Very nice and clean work done 👍

@8SPAZZ 11 месяцев назад

Thanks again Mark!

@operationsusfoods1354 5 дней назад

The hand reaaally scared me! haahaha nice

@erikkarling2176 5 лет назад

That is some A+ work. I'm always super impressed and left with great ideas. Thx!

@joeysawyer7572 5 лет назад

Looks great man

@96kylar 5 лет назад

Gorgeous man. Top tier work/application as always dude. Good shit... keep it up mate.

@colbynye5995 5 лет назад

Absolutely love the tiny hand joke!

@philmapockitz8216 5 лет назад

Great tutorial....madd props man 👍👍

@shingdaz 5 лет назад

used hdpe on door speakers, plastics are best for waterproofing door or preventing freeze expansion issues in colder temps...helps to use jigs, used an hand held router to counter sink driver mounting hole etc...the had to shape outer edge to fit the curves of door indentaion soraker moutning location etc...it took 3 hours to shape and fit the hdpe speaker mount panel into the door properly...close ups of the driver mounted are difficult to spot uts was done by hand eye router cutting.

@bmw-e30 5 лет назад

Its amazing what can be modified. I would have been inclined to get the same shape speaker as the old one.

@CarAudioFabrication 5 лет назад

Unfortunately 6x9's generally just done have as good of sound quality, and their are fewer high end high power rating options.

@SeanMolby 5 лет назад

Love it! Nice work Mark

@PoppaTInstall 5 лет назад

I think that was Doug's hand. LOL!

@dominiquerichardson 5 лет назад

lol dougs hand indeed

@GCor71 5 лет назад

Thanks for another educational video. Enjoyed your little hand. Hehehe Stay warm!

@carolyvonfaula1622 5 лет назад

very good vidéo ! with the best of speaker : FOCAL french speakers (i'm a little french)

@oldschoolisnewschool 5 лет назад

I had not seen your videos in about 1.5 years. I love them. I think that you gained some weight. You are starting to look like Eddie munste's dad. But in a good way. Tanks for the great work.

@bablobhai 5 лет назад

hahaha 05:53 i didn't come here to laugh, i came here to learn!!!