Hi friends! I bring you a new video, where I share this magnificent template that I made to have versatility of cuts, in an agile and safe way. In this template you will be able to edge wood, cut at different types of angles, use it as a squaring tool and also, you will be able to cut wood that exceeds the size of the template. I hope you find it useful.
EXPLODED AND MEASURES (indicative, how I did it)
- 1 piece of phenolic or plywood of 63x35 cm (base of the template. To this piece generate 3 gutters 5 cm from each head and another in the center. The gutters must be made from back to front, gutting up to 2cms before the end of the face that will be glued to the saw blade)
- 1 piece for the rail. Here you can use the wood you want, the important thing is that you can cut it to the size of the rail of your table saw. You can measure the total length of your template or a few cm less from each end.
- 1 piece of phenolic or plywood 57x7 cm (top). at the top, generate a slot in the center to be able to move it freely through the template.
- 3 T-Track profiles 33 cm long that will be the template rails
- 3 pieces of saligna 2x1" 14 cm long (You can do it in any wood, whatever you have in your workshop). These pieces will be the garments that will go 1 for each rail.
- 3 screws of 5mm diameter by 8 cm long (Here you can use the screw diameter you want, the important thing is that I inserted the head in each rail).
- 3 washers for the aforementioned screw
- 3 wing nuts for the aforementioned screws or for the screws you use
With this and the video you can make the template without problems and GO TO WORK!!!
3 июл 2022
