Review and How to of innopow 80-Channel Dual UHF Wireless Microphone System,Metal Distance 200-240Ft Buy here amzn.to/3j0U6wa After 2 years these mics are still working like a charm. Love them.
Sounds great for the price. Definitely useful for live performances. Not sure I'd use it for vocals in the studio though. If I was gonna use a dynamic mic in the studio I'd probably go for the Shure sm7b. But these definitely have decent quality for live events. Can't beat it for the price really.
I don't know what kind of studio you have , i have a bos,s and i think it would sound good, plenty bass, and you must have plenty money the sure are a bit pricey for me
If you pay attention the sounds cuts several times when you were out. I have this problem with one of the microphones. One works perfectly, the other cuts every few seconds, but also has some annoying interference when the hand touchs the microphone, like some static. Since you were recording the sound I expected that you listen to check for sound quality. I have a second receiver with lavallier microphones, also the same issue, the sounds cuts from time to time. First idea is to try different frequencies but the problem was not solved, I'm quite puzzled why this behaviour
@@fernandocf1234 I bought a RFExplorer to get insight, and the whole range of upper 40 frequencies spectrum is under interference and that seems to be the reason of the intermitent chops. By these times, I can't blame the micros. But it's quite unfortunate I can't use some channel of the first lower 40 frequency range in the second mic
I haven't tried increasing the volume since this ones I have outputs a high output to system. Watch the level indicator to see if you are getting enough input from manufacturer
Yes, to the same console or mixing board. The mics will change to channels to avoid interference conflict. 2 years after and I'm still using mines. Buy here amzn.to/3j0U6wa
haha! I know, everyone wants to know how far the signal goes cause most buildings are made of steel and that is what causing interference if you go far from receiver. These ones work perfect.. 2 years after.
I believe this is it! If not contact seller. innopow Microphone System WM333 (Handheld 333H) www.amazon.com/dp/B07RP6DDYL/ref=cm_sw_r_cp_api_fabc_rANUFbRWVPK9J
The mic system looks great but measurement of distance is WAY OFF. There's NO WAY you were 250-275 feet away. You might have been 75 feet from that red car....maybe.? It looked more like 50-60 feet from the car. But even if you were 75 feet away from the car, that means it's 200 feet from the car to the unit.
To get to unit i had to go through garage and walk about 20 ft. It was about 75-90 ft but remember I closed door and there’s a brick wall between receiver and mic at that point outside. I’m guessing most people will use it on a same open room.
It's more important to show how to set a free channel, Something that you don't show at all! You spend most of the time with the distance which isn't very helpful!
John Thomas i had more request for distance quality than other features you can learn by reading the manual. It'll be nice to show all but need it to keep video short.
I was somewhat interested until I saw it operates in the 600 MHz set of frequencies. Those frequencies are now banned by the FCC from use in wireless equipment other than cell phones and emergency services. At best you will get a lot of interference, at worst you can be fined for using it. Stay away from any mics or any equipment using the 600mHz and 700MHz range of frequencies. anything below 600 you are fine (for now).
@@BrandonGiles The new one's I've seen for sale are now working in the 500Mhz. But you have to buy from a reputed seller. If you buy online you should be able to contact the seller and request the exact frequencies. The operating frequencies of a particular set should be shown on the box so it's easy to verify.
i wonder why you need to demonstrate us how far can you walk while Talking? I was expecting from you to show more about the use of those switches included by that mic system. for example, whats the use of that "menu" on front Panel? You didn't even Show us how did you install those wire Connections. USELESS
