Insane Floating Tensegrity Chair 

the center rope is the one which carries all the weight..

The sound and the video is really professional - pleasure

@@lahshad chuyến ao twe

@@lahshad chuyến ao twe

How is it floating?

Quite literally.

@HalKael more like ball buster 🤦🏾‍♂️😖

lol exactly

Dad jokes are the best

@@ShyShyTheGem what are you 🌰NUTS🌰!?! 🤪😂😭😂

HAHAHAHAAAA! The best!!! That cracked me up thanks! 😂🤣

Wakakakakakaka

God Christ Jesus bless you all and have a wonderful day my family

Retire this stupid meme style comment. Its old af and over-used.

That was exactly what I thought

how you think they did it?

@@sa.8208 they could have just drawn a green rectangle in those 22 frames and then blur a little the edges, then doing a simple chroma key to remove the rectangle it should work well

They could have created a green mask as he was lifting it and then chroma keyed it to another shot. It's quite simole

Did you puke or something?

It looks like a transition from Tool Time with Tim the Tool Man.

🤣🤣🤣🤣🤣🤣

I don’t think I’d be saying goodby though I’d probably moan in pleasure

Yooooo😂😂😂

"argh my prostate!" - Big Lenny

@@anikalmao massaging and crushing are very different concepts

Haha yes net breaks and shum

YES

@@OriginalJayden shum? That's a good sound effect! Better than the plop that I imagined...maybe too much of adult videos...

Also remember that it is just one rope holding all the weight and the others are just tie-downs

Rope in center breaks then the middle one will go straight towards his b**t. hell breaks loose.

True

Exactly. ლ(・﹏・ლ)

RIGHT?! I have never went bruh so many times on a youtube video just from transitions XDDD

True me to idlike it

Mate if that breaks... There will be huge stick stuck in his back door

1:09 was such a smooth transition

True, the transitions were so good. Great vid all in all

1:30 in and I seriously said out loud "oh okay" 😂😎👌

everything is on point

@@DeliciousVicious777 I was thinking the same thing

Ikr

sit too long and goes your ass

They would be more focused on the chair failing than their work

If the seat failure , I see the shoot underneath was directly to his ball.

Putting the tense in tensegrity.

Lol🤭

Ded

Ну и шутник

Will become antigravity dead or alive ...

I fell on it. What?

Funny

good one

Vlad to the bone, Vlad the hat nailer, Vlad that commits heinous acts on rats, ask the jailor!

Rectum?? It damn near killed him! ;P

Da

I got tears in my eyes laughing

Okay I'm robbin ya of that great metaphor

FML

Wtf

Or the impaler!

Or gay chair

The nuts cracker

Vieni a dare un'occhiata al mio canale

I like the idea too, great

I invite you to me

Duyu lake da idaa?

Dildo chair nice work!

If it fails he'd better be as relaxed as possible

xDDD

Damn 😂🤣

Omg.. perfect

LMFAO! So true, so scary!

Ha! Ha! He was pretty close to losing something!!

He didn't even use wood glue. Ugh.

I spit at wood glue

@@marvincompa1677 that's kinky

@@heavysleeperassclapper6054 LMAOOOOOOOOOO

Not really. Tensegrity sculptures are actually quite stable

More like generic

Yeah same story here. Seriously though this is a seriously dangerous chair. Cant believe this bloke even considered it to be a good idea.

@@vb8428 Good point. Cliche would've been more generous but it's fine line regardless between generic and iconic.

@@Cchange4us agreed. It probably just sits unused in the corner, but if it's a daily driver, so to speak, a good coat of penetrating oil is in order.

.

Curse bots

Abi bu nası yapmış

Ne geziyon burda

Bot kullanma kardeşim ayıp

Lmao righttt no way he doesnt own a chop saw safer and straighter cuts????

LMFAO!🤣

granny knot

there's a lot of different things it depends on as to whether or not free-handing is safe on the table-saw. the way he did it in the video wouldn't have kicked back the material in such a way that would have impaled him because he wasn't holding the sticks with the ends pointed directly at the saw blade, instead, it was the center of the sticks; not to mention, he had both hand's on the sticks at all times. Also, it depends upon the type of wood you're using and/or the power of the saw. Working in a mill, the saw would be much stronger and you should never really free-hand anything on them, especially since you could probably just use a band-saw instead since the scenario is in a mill. I've worked for a stair company, and in the shop there were holes in the wall behind the table saw, obviously from wood just shooting like bullets. But these standard table saws that basic carpenters carry around or have at home that plug into a 20amp circuit most-likely aren't going to kick a piece of wood back at a person so fast that it impales their tissue, unless of course it shoots something toward the eyeballs. Now, I don't work at the mill. I mostly do finish trim carpentry, and I freehand a lot on the table saw simply because I don't have a portable band saw. The blades on the regular 15amp table saw, like the one in the video, will stall due to lack of torque far sooner than overpowering you and kicking you or the material back.

@@ZeldaplusSmallville Complete nonsense. There is no advantage to freehanding (really, you can't at least fit a miter gauge alongside your jobsite saw?) - the cut is less straight AND less safe. What's the point? And *maybe* it won't kickback, but if you've been a finish carpenter then I'm sure you've *seen* kickback. It's extremely violent and not something worth playing around with. For the cuts you describe, use a miter saw then. There's one of those on every jobsite I've ever seen.

@@jamesspadaro7722 you’re crazy bro, it’s not that uncontrollable on a 15amp table saw, you clearly aren’t a professional

@@ZeldaplusSmallville It probably isn't, I agree. But it's also very volatile and hard to predict. What's the point of taking the chance? What are you gaining? Oh, right, crappy not-straight crosscuts. Miter saw is literally *right* there. Same with a miter gauge. Laziness and shoddy work to save... literally no effort.

@@jamesspadaro7722 I have two miter saws I carry around with me, you can’t take a piece of door casing that’s 3 1/2” wide by 85” long and cut that down the line on a fucking miter saw. You’re loopy dude. If the walls out of plumb and I have to rip the casing the fit the wall, sometimes it can be over 3/4” out of plum and you can’t use a skill saw and you damn sure can’t take a miter saw that only reaches out 15” and safely cut down 85” inches of trim material. You clearly have no idea what you’re talking about. All I have to do is drop a line and follow it on the table saw like I do on the bandsaw. It saves time and money and you’re not going to get impaled by a piece of trim material. Want me to post a video of me doing it for you so you can learn a thing or two?

Yeah... judging by the fact he didn't use a miter saw, I'd guess he doesn't have one... and I've gotta wonder... did he do all those miters on a table saw? 0_O Now THAT'S dangerous

Freehand pushing the stock through with both hands is bound to get a pinch and serious kickback. That's begging for a painful injury.

You think someone who sits on that chair bothers about little things like getting cut from a table saw?

@@tarun9542 oh it’s not just any little cut, there’s also kickback

@@nathanielbean3119 You didn't get the joke mate.

I'll show after a while

@@TheQ_original 😳

Please do a QNA

🙂⚒🙂

Omg q replied you

Actually a floating chair without even need bigger flat magnet

Bro thats what I was just about to comment

Best comment

🤣🤣🤣🤣🤣🤣🤣

Outch, this is painful. It's so painful that I tightened my teeth while imagining it.

@@antoniorivas4100 me too

It will if he moves around a bit.

you just fall

Probably will feel like the time jackie chan jumped on a bicycle with no seat ouch

@@user-jh3kz7dp2z just fall, directly on to a stick pointed at a certain sensitive set of areas :P

The stick in the middle will stick in the ass

@@neosama8930 yea youre right hahahaha

Venite a dare un'occhiata al mio canale

to be precise - these are his interpretations of someone else's ideas.

This is not a new idea but it is very cool

Hiiiiiiiiiiiii

Znicz that totally helps😕

It is not is editing you fool 😂 You need some brain 🧠

Lol. Pls watch again. And see how smooth it was! and read your comment before you tell someone to use some brain! 😊

@@BuddyChuck-ph look all comments ,you are only one say it is editing

Hahaha, buddy 😂😂😂 so from the start you really didn't understand anything about my comment on this video huh, i thought you we're smarter than that. But ok. Have a nice day! 😂😂😂😂 hahaha you made my day buddy. 😂😂

@@shaunshaji9032 you funny man! 😂😂

Very bouncy

Yeah, he is cheating physics lol

Helps him keep alert not too relax🤣🤣

Constantly clenched cheeks

😂

3 - show medical certificate of fractured bones

4- hope that the wood don’t not shrank into the as

I mean, you are at risk of some serious rectal trauma, but on the other hand it's a really cool chair.

🤣🤣

Risk vrs rectum.......damn near killed em

I sacrifice my own life for Pakistan😂😂

Visited new Channel fai da te impariamo e ripariamo 😉

@Toyota Supra OwO vieni a dare un'occhiata al mio canale fai da te impariamo e ripariamo insegno a lavorare il legno e tanti trucchi 😉

Bomb nuke 🚓🖍️

Dont worry about the reply above me, its just a very bad hate bot in its training phase

That would be so dangerous in wild fires xD

😂😂😂

@@iaminthenowhereinn no iron man in Avengers 😂😂... only WOOD Man Q

You've seen the videos for tensegrity tables, right? If not, that's a rabbit hole you should dive into right away.

eh, just be careful, it's done all the time in pro molding shops

Or slip/fall forward 😬

@@bryanska not in any shop I would ever work in

I came here to say exactly this. People think it's fine because they are careful, until one day they see how quickly that thing can throw a piece of material backwards. Its scary AF.

@@bryanska I freehanded once, and nearly cut off my index finger. I got lucky, with just a severed central slip tendon, but the recovery took more than six months. It takes an afternoon to make a cross cut sled, and makes every cut thereafter infinitely safer. I strongly encourage everyone using a table saw to have one, and never go without a sled or fence.

И когда этот лед провалится в низу вас буду ждать я:)

Te apoyo bro

Это факт, достаточно порваться центральному шнуру и торчащая палка прямиком войдет ну вы понимаете!))

Позовите доктора! Доктора Дью канеш!

@@sndvc в дупло?

No reason not to use metal cables, most of the tensegrity tables out there use metal cables after all.

Metal chain would be more metal.

Why will it hurt?

Let's say that this chair isn't for someone over 200 lbs :D :D

@@yumco7588 all the pressure from his weight is on that plank of wood from the bottom. If the pressure is higher than the plank resistance then the chair will fall apart and he might get hurt from the same plank i mention earlier

@@sprinngam2536 oh ok 👍

@I only comment while I’m on the shitter yea, but the rope have more rezistance so its more about the suspended plank. Anyway ty for observation

Venite a dare un'occhiata al mio canale 😉

Don't worry. The rope looks strong enough compared to the rest...