This is awesome. I can see the drone you made has extraordinary stability compared to other clones out there. So far the best one I have ever seen. I would like to make one too. Is there anything that you could recommend us if we are making one? Btw, the link you provided below seems out of date. Thanks a lot.
Hello CrazyKidult, i come back to you... I just made an Inspire 3d clone but I still have the same problem with the arduino. It never finds the PinChangeInt despite its presence in my PC. Do you have the full code that works correctly for the arms? thank you so much
Hi Minwook, good job for you...i'm building one Inspire too but do you tell me if you used an arduino nano to up/down arms..and in this case could you send me a picture about your wires (cables from rx...etc...) and i get a problem with librairies under arduino...could you have some idea...? Happy fly Philippe
관심 가져주셔서 감사합니다. 일단, 띵기버스에 올라온 모델과는 차이가 있습니다. 거기에 올라온 제품은 4셀 제품이고, 모터마운트 부분과 베터리 부분, 내부 구조도 다 커스텀 된 상태입니다. 띵기버스에 올라온 모델 그대로 6셀로 하게 되면 마운트 부분이 더 보강이 되어야 할꺼고, 베터리 삽입부는 작을꺼 같네요. 용량이 적은 베터리로 하시면 가능은 하겠습니다만 제가 6셀 5천짜리로 테스트 해 본 결과 호버링만 약 8~9분 정도 나왔습니다. 생각보다 기체가 무겁습니다. 강성을 생각해서 출력물의 Fill 정도를 높였더니 그렇네요. 그냥 취미로 만들어 보시는거라면 모를까 주력으로 하시는 거라면 그냥 사시는게 돈 절약되는겁니다. ㅎㅎ
Hi! I have some small questions. I am looking to build this drone except the 1.5 version. Can you tell me how much you paid for the fillaments and parts in total? Also what controller are you using? Thank you very much
Thanks for watching my video. This version is not 1.5. this is 6cell version. different 1.5 version. And, It need about 1 roll filament for make total body. I used walkera Devo10 controller.
Nicolas: If you want to buy a commercial budget priced battery: the Zippy 6S 5000mAh 40C battery gets it done ... thi sis what I used in my DJI Inspire clone build: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-zmkWxsa_Sg4.html Mine weighed in at 7 pounds, frame size is about 650mm, and I loaded it with tons of gear: DJI NAZA M V2 with GPS and Ground Station + iPad Air Vidit360.com 360 panoramic video camera Motors: Black Widow 4110-460 with integrated 40A ESC 13 X 5.5 carbon fiber props Zippy 6S 5000mAh 40C battery (good for 15-20mins flight time) 2000mW 5.8Ghz FPV video transmitter 2000mW highly modified FlySky FS-T6 2.4ghz 6ch radio Landing gear lift mechanism: M5 lead-screw 360deg servo drive for lifting motor arms
+Vlad B if you wonder those parts, please show ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-1H2HNLl1ZgI.html MG995 360 degree servo main board + Goteck servo's motor. you must diy Goteck servo make 360 degree.
No. I Can't. because, stl file of inspire1 is customizing by me(insclonia club).My version is 6cell version. so you can't got this. sorry. but You can get normal inspire 1 3cell version in "Thingiverse"
Sim Isso mesmo. Criamos o estômago usando o arquivo STL. Eu não posso compartilhar porque eu fiz isso com os outros. O arquivo STL subjacente usa o que está em "Thingiverse".