Install Audio AUX Cable and activate with Diagbox (PP2000 or Lexia) on Peugeot Citroen RD4 Radio CD

Подписаться 48 тыс.

Просмотров 1,4 млн

50% 1

How to Install AUX Cable and activate with Diagbox on Peugeot Citroen RD4 Radio CD.
Links:
- Audio AUX Cable with Radio Removal Tools For Peugeot 307 308 408 407 507 C2 C5 Citroen RD4: s.click.aliexpress.com/e/_DES...
- Bluetooth Audio AUX IN Module: s.click.aliexpress.com/e/_DDm...
- Diagbox interface, Diagnostic functions activator Tool for Peugeot & Citroen: s.click.aliexpress.com/e/_DFa...
- mp3 usb reader for Peugeot & Citroen: s.click.aliexpress.com/e/_DCe...
- Display Type "C" screen 12 pin for Peugeot 307 308 407 408 citroen C4 C5: s.click.aliexpress.com/e/_DlB...
➢ Contact: pgt.adrian @ gmail.com
➢ Facebook Page: / adrian-pgt-diy-repairs...
➢ TikTok: / adrianpgt
➢ If you like, you can buy me a coffee: paypal.me/adioperator?locale....
Comment, Thumbs up, Share, and Subscribe!
Music: Music: Rain (ft. Enine) by JayJen Music / jayjenmusic Creative Commons - Attribution 3.0 Unported - CC BY 3.0 creativecommons.org/licenses/b... Music promoted by Audio Library • Rain - JayJen Music & ...

Авто/Мото

Опубликовано:

14 апр 2019

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 444

@itsshalevfromtaxidashcamer9390 5 лет назад

Adrian, you doing a awesome job! 👍👍👍👍👍👍

@ionmalaescu5305 24 дня назад

Salut Adrian! Am schimbat radio cu un ecran de 9 inch cu tot cu mască cu android 12 două usb ! Merge bine ! 307 sw 2.0 hdi 136 cp cap serie cu toate imbunătătirile cumparat nou cu 22 mii€ pe cind lucram strungar la Bar celona ! In aprilie 2008 azi in iunie 2024 are 188 mii/km fără nici o reparație! O zi bună să ai!

@AdrianDragan 5 дней назад

Salutare! Super masina, sa o folosesti in continoare cu placere!

@sidahmedalem2309 4 года назад

Thank you, I 'm getting a 207 and I'll apply this.

@AdrianDragan 4 года назад

Hi. You can try the bluetooth module instead of the auxiliary cable, much more convenient ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-NaBDzcwQdZg.html

@vatomi81 2 года назад

Many thx, it's works perfactly!

@Wablo28 4 года назад

thanks men 💕💕💕 greetings from chile 🤪👋

@eberfernandooyanedeltapia3567 3 года назад

Pablo tu lograste configurar el dispositivo??

@mrjohndown4242 3 года назад

Works! Thank you.

@saulroan6709 3 года назад

Thanks from México 🇲🇽👍

@MrDCoy2010 4 года назад

Very good tutorial, I chose to get one of those USB to radio things took about 2 min to set up and I can take my calls easier, save myself half the day. and it has many other uses along with it.

@lacry782 4 года назад

What version of diagbox you used for activation source?

@eminabrezac7031 4 года назад

Thank you sooo much,I have same car and I never can do this on radio,now I know how to,and I can,THANKS!!!!😊😊😊

@dimitrifoucault3465 3 года назад

Elle est super ta vidéo

@CesGu 5 лет назад

Thanks man

@kacper8554 5 лет назад

THANK YOU!!

@Reichsprasident88 5 лет назад

Good Video!

@fouzib7801 4 года назад

Gracias por todos los temas que nos proporcionas, quiero que pongas un tema para nosotros en el 2015 Citroen . Tu amigo Mohamed Fawzi de Argelia 🇩🇿

@AdrianDragan 4 года назад

Thanks for your comment. I'm sorry but I don't have a Citroen, but Peugeot and Citroen are very similar. Anyway, I need a newer Peugeot too :))

@AdrianDragan 4 года назад

Yes, it's works.

@user-tm7jr7jf1i 5 лет назад

The best tutorial thank you

@Saf430 2 года назад

Thank you!

@bulmacomillas 2 года назад

Muy bueno 👏👏👏👏

@NOLINPALACIOS 5 лет назад

It Would Be Interesting a video of how to install an interface to use the steering wheel controls and recover the computer on board in Peugeot 308. Thank You for your work

@AdrianDragan 5 лет назад

Hi, Thanks for suggestion, I'm going to do a tutorial in the next few weeks. However, you do not need any hardware interface, just activate the Diagbox software option to adjust the clock and display settings with the steering wheel controls.

@MonoChorMe 2 года назад

Wow, really?... So you're saying that I don't need additional hardware? If that's the case, then that is awesome! Because, I read on forums that said that an aftermarket module/hardware, called "PC99-X44" (X44 being specifically for Peugeot) from brands such as «Connects2» or «Autoleads» should be bought, in order to do that very same feature... And that bloody module costs like nearly 100 Euros/90 Pounds!... My car is a 307 SW (2006)

@zalmbow1011 Год назад

Merci 💯

@achimPL 20 дней назад

Hey Adrian, your videos are great, they helped me a lot. Did you ever had an issue with activation of AUX2 in RD4 from 2012? With Lexia I can change input from mode missing to reserved to kml/nomad. My original handsfree radio works well, through aux1, but i also want to actvate AUX2 to use aux cable from headphone jack. Lexia works well because when I am changing aux1 from kml/nomad to conventional, I can choose aux input on my radio, but I i have still missing AUX2 when changing source of my radioreceiver.

@AdrianDragan 5 дней назад

Hello. I don't really understand why it doesn't work. But don't you have RCA plugs for AUX in in the glove box?

@AfricaBullcalo 2 месяца назад

muy bueno 😀😃

@mrgreenfull3897 2 месяца назад

Hi, thanks for the nice video! Can I use Diagbox with bluetooth ODB adapter or it has to be with cable into the computer ?

@AdrianDragan 2 месяца назад

Hello. Diagbox only works with the dedicated interface connected to a computer on which you installed Diagbox.

@dmitrij2099 5 лет назад

Красаучык!!!

@AdrianDragan 4 года назад

Hi, Just re-add the aux cable.

@teemuhakkarainen3 4 года назад

hello so i just did all this but when the diagbox is connected and i go to radio menu it works perfectly just like in the video but when i disconnect the diagbox it seems like the radio is deactivated i cant turn it on anyway and when i go to menu screen with the multifunction screen audio setting is like creyed out if that maxes sense. i have also tryed to disconect the aux and revert the change in ecu but the problem percists. any help would be apreciated.

@drPeidos 2 месяца назад

Citroen C4 2004, same procedure. Thanks.

@AdrianDragan 2 месяца назад

Thanks for the feedback.

@MatthewGanley 5 лет назад

I brought a bluetooth thing u put in the car cigarette lighter socket much easier but the only thing u got to do is pair it with bluetooth with your mobile phone

@dinmentor 2 года назад

What do you mean car socket?

@moniquebennett5248 2 года назад

The lighter section, mostly on older models of cars .

@dustraider2940 5 лет назад

I bought a 2009 Peugeot 308 with RD4 radio and the previous owner had already installed the AUX cable. I connected my phone with Spotify playing songs and it plays fine, however the controls behind the steering wheel don't work. I can raise the volume from the radio knob, but not from the controls behind the steering wheel, and next or previous song I have to do it on the phone. You're raising the volume from behind the wheel in the video. The car reads the AUX input so I guess it's already activated with Diagbox.

@AdrianDragan 5 лет назад

I don't know why you can not adjust the volume from the controls behind the steering wheel, however when using the AUX IN function thet next or previous song can only be used on the phone.

@dustraider2940 5 лет назад

@@AdrianDragan Do the next and previous song controls work on bluetooth? And can I install one of those boxes with bluetooth on them?

@AdrianDragan 5 лет назад

@@dustraider2940 This is only has the Audio Line In function and you can not control next and previous song. Perhaps with the original Bluetooth Peugeot.

@dustraider2940 5 лет назад

@@AdrianDragan Ok, thanks.

@anfahrt 5 лет назад

Thank you for this video. Can you tell me where you can get the PSA Diagbox software?

@AdrianDragan 5 лет назад

I bought Diagbox software and hardware from Aliexpress, come together.

@anfahrt 5 лет назад

@@AdrianDragan Can you give me a link?

@Jocheque 5 лет назад

Hi, I'm just as interested as you and I think this is, I'm saying it because it has the same number as the device that shows 9780.Z5. es.aliexpress.com/store/product/Lexia3-PP2000-with-Diagbox-V7-82-Software-Scanner-for-Citroen-for-Peugeot-OBDII-Code-Reader-Auto/2924002_32956873787.html?spm=a219c.search0104.3.1.4ced47fa72eWjK&ws_ab_test=searchweb0_0,searchweb201602_3_10065_10068_10547_319_10059_10884_317_10548_10887_10696_321_322_10084_453_454_10083_10103_10618_10307_10712_537_536_10713,searchweb201603_6,ppcSwitch_0&algo_expid=ebeccff7-e33e-4c9a-8f6b-3eeae5363304-0&algo_pvid=ebeccff7-e33e-4c9a-8f6b-3eeae5363304

@AdrianDragan 5 лет назад

@@Jocheque Hi, seems to be the same as what I have.

@alan36753 2 года назад

Link died! Will this work with fiat Scudo as radio looks identical

@chsims1 3 года назад

I already have an aux connection in the glove compartment, but want to add a BT to aux device close to the radio. If I add similar cable to the one you used in this video, would it still need activating, even though the current aux works fine? Cheers!

@AdrianDragan 3 года назад

Hello. Your car already has the AUX IN function activated, so you don't have to activate it anymore. Just plug in the Bluetooth module and it will work fine.

@chsims1 3 года назад

@@AdrianDragan Cheers for the reply.

@joedied5674 17 дней назад

I plugged in my aux to Bluetooth in front of the shifter on my 207cc and it doesn't work

@WolfMagical 3 года назад

great video! this might be a stupid question but i just bought a Peugeot 308 with AUX already installed, but when i plugged in my phone and used the Source button to select input AUX it said inptut AUX 2 instead of AUX 1 and no sound was coming out. i was just wondering if you may know if i need to reinstall the AUX cable or something?

@AdrianDragan 3 года назад

Hello. I think you should enable AUX 1 using Diagbox.

@WolfMagical 3 года назад

@@AdrianDragan ok, I'll try it! Thank you for answering 😊

@lukeloop Месяц назад

Mine is like that PLEASE let me know if and how it got fixed. I bout an RCA to lightning cable for my iphone hopng it would allow me to connect but I do not get any sound. It is AUX 2 only available. I own a 2011 Peugoet 308 cc. The display screen is orange LED. No usb slots or anything. Much appreciated.

@facundoyarade7731 5 лет назад

En vez de agujerear el portaobjetos inferior, hubieras sacado el cable auxiliar por el orificio que esta detras de la luz de guantera y queda mas disimulado

@AdrianDragan 5 лет назад

Everyone is free to put the cable anyway, I chose to put it there because it's more handy.

@miloszivic7117 3 года назад

Adrian, do you remember if your volume with aux was lower?

@AdrianDragan 3 года назад

Yes, the volume on Aux IN was a little bit lower than on Radio or CD. But for me it was enough.

@ademilsoncarlos3211 4 года назад

Muito bom

@russellpressman1631 2 года назад

I've just taking my radio out and the back of it already has a plug in the place you put yours there is a spare one next to it tho

@AdrianDragan 2 года назад

Remove the white plug that already exists and replace the plug from the auxiliary cable.

@alaaalali2847 Год назад

Is it working?

@bungabongo Год назад

Does diagbox allow you to select aux in as default on the radio? My radio comes with aux built in but have to change from fm radio to aux in every time I turn on ignition.

@AdrianDragan Год назад

Hello. I did not see the option to start multimedia directly on the Aux port.

@jeyfh876 2 года назад

Hey Adrian, I recently bought a 207 Sport. I tried to connect with the aux port but it didnt work. Then I bought a 12-pin aux cable and installed it like you in this video. The aux 1 input was already activated when I bought the car but it still doesnt work. Tried with two different phones (iOS and android) but there was no sound coming out of the speakers. Could it be that the radio is faulty? Also, the seller I bought the cable from said it works for 207 RD4 from Bosch, but my RD4 is from Continental. Could that also be an issue?

@AdrianDragan 2 года назад

Hello. There are two AUX IN. I think your cable is configured for AUX 2, I don't think the radio can be faulty. One more thing: did you say that you already have AUX IN activated, you don't have two RCA plugs in the glove box?

@jeyfh876 2 года назад

@@AdrianDragan Thanks for the reply Adrian. Yes, AUX IN was already activated (I bought the car used) but I dont have two RCA plugs in the glove box. Only one AUX IN in the middle console at the bottom, next to a USB port. (just behind the gearshifting stick). But that AUX port didnt work, so I bought the cable. When I press the 'source' button on the radio it changes between radio and AUX IN 1. So I did the same like you in the video. (same spot for the 12 pin connector) I am really clueless atm.

@cponofrei 5 лет назад

Super tutorial! Am un Peugeot 308 din 2011 (facelift). O sa vreau sa fac aceeasi operatiune si pentru partea de bluetooth sa merg pe un modul FiiO uBtr ( cei de la avstore il au). Calitate audio de top la un buget mic. Am vazut pe net ca s-ar putea pune retrofit si cruise control. Ce stii despre asta?

@AdrianDragan 5 лет назад

Salut, multumesc pentru aprecieri. Da, se poate face retrofit la Cruise control, este unul din clipurile trecute pe lista de asteptare, spun ca in cateva saptamani o sa fie facut.

@bakautikas93 5 лет назад

i've activated the aux-in in a citroen c5 but i don't get any sound. any idea why?

@victor-sc2ed 3 года назад

i hace same problem

@bakautikas93 3 года назад

@@victor-sc2ed find the pin diagram of the connector and change the pins to match with aux in 2

@victor-sc2ed 3 года назад

@@bakautikas93 ohhh in aux 2 works? Is same than aux 1?? Thanks a lot. I was thinking that is necesary yes or yes aux1 pins

@victor-sc2ed 3 года назад

@@bakautikas93 you was ritgh. A lot of thankss..i chabge position of pinss💖💖💖

@bakautikas93 3 года назад

@@victor-sc2ed glad to help

@mrcschmd 3 года назад

How do I know if AUX is activated? Just bought the car and when I select source I can choose from radio and aux. That means it must be activated right?

@AdrianDragan 3 года назад

If you already have AUX in the menu, you don't need to activate it with Diagbox.

@twisted_sista_bmccleanmiss6048 4 года назад

Hi there Just got a 307cc and have the cable on order, my question is how much is a garage gonna charge me to do the computer side of things?

@AdrianDragan 4 года назад

Probably 10-20 Euro.

@Wednesdaaayyy 4 года назад

I was going through these stages when I realised the previous owner had already done this yet removed the chord. Will I still need to set it up with the computer or just re-add an aux chord?

@henriquecontreira1692 4 года назад

Just need to re-add

@adurrans 4 года назад

I've gone to do this yet there's already a cable in the space you mentioned 😬 and the plug doesn't fit the other side. What's that cable there for? Any workaround?

@AdrianDragan 4 года назад

Simple: remove the plug that is stuck there and put the plug from your cable ;)

@attaradio2724 4 года назад

Andy Durrans did it work for you, i have the same problem. But i did not have the balls to take out the other pin 😂

@adurrans 4 года назад

@@attaradio2724 yup worked absolutely fine, haven't noticed any effects from the old cable not being there either, everything still works (steering wheel controls etc).

@attaradio2724 4 года назад

@@adurrans Thanks for responding, took the old plug out and put the new one in. Works just fine!

@pawerok882 4 года назад

Is that cable works in 308 ? RD4

@aureliantrifa463 4 года назад

Salut, Foarte sugestiv tutorialul. Intrebare: din comenzile de la volan, se poate trece la melodia urmatoare sau doar se actioneaza doar pe volum?

@AdrianDragan 4 года назад

Salutare! Se poate actiona doar pentru volum. Multumesc pentru aprecieri :)

@haris9494 4 года назад

@@AdrianDragan please help.. After set convectional and apply get this : programing failed

@AdrianDragan 4 года назад

@@haris9494 I've heard of this problem before and I don't know what would be the cause or its solution ...

@hegi. Год назад

What cable do you use for the car to laptop connection, can you please give a link for buying?

@AdrianDragan Год назад

Hi. You need this cable (Color: FULL LED): s.click.aliexpress.com/e/_DlYZGV7

@viktorshmits7368 5 лет назад

Может кто подскажет,как подсоеденить магнитолу другую эту оставить??? в роли(бортовова компьютера и разных показаний а другую использувать как музыку хорошую с усилком

@oleksiiileksus9218 4 месяца назад

Можна замінити на нову без старої, але треба перехідник, є моделі дорожчих перехідніків, які будуть працювати з мульти рулем В гривнях це більше 2000

@HaraldSeeger 2 месяца назад

I have retrofitted my 207 with a RD45, new display, microphone installed in the roof. Everything works great except one thing: The audio settings in the menu are greyed out, cannot select them. Do you have an idea? Will I need a diagbox to activate it? Would not like that...

@howlingbeats2544 2 месяца назад

Yes, when upgrading to an RD45, you need to reprogram it. I assume you had an RD3 or an RD4 previously installed. Fortunately, doing such a thing at a qualified Peugeot mechanic doesn't cost much.

@AdrianDragan 2 месяца назад

Right.

@AndreiaCorreia-zx8vb 28 дней назад

Hello! I have a Peugeot 407 with the RT3 radio. In the glove box I already have the video rca, so I just purchase the audi rca cable with a 3.5 jack in the other end and I am able to use it only in the video mode, so it doesn't work when I'm driving. After this, it's only necessary to activate the aux through the Diagbox and that's it? Or is there anything else to do? Thanks a lot for the help!!

@AdrianDragan 5 дней назад

Hello. I'm sorry, but I don't know what the steps would be to enable AUX on this RT3. However, try to activate AUX IN audio using Diagbox, you may also have to connect the cable to the radio jack in the dedicated audio aux in port.

@eliedrone 3 года назад

Thanks a lot for you video. I have the original display screen and a new autoradio. Is it possible to configure display screen with pp2000? Or I need to change it? Thanx

@AdrianDragan 3 года назад

Hi. What type of car radio do you have now?

@eliedrone 3 года назад

@@AdrianDragan hi Adrian. Thanks ! A low cost autoradio

@AdrianDragan 3 года назад

@@eliedrone Reconnect the original radio, set the clock and then replace the new radio.

@eliedrone 3 года назад

@@AdrianDragan don’ t have anymore the original car radio..

@kierantaylor8588 3 года назад

When I hook up the digabox and get to the repair section it comes up with "communication error" on pretty much everything any idea why this is??

@AdrianDragan 3 года назад

Hello! I'm sorry but I did not encounter this error. Is the car recognized by Diagbox?

@gst_6377 3 года назад

Mines comes up programing failed how would i fix this?

@kierantaylor8588 4 года назад

Question if I buy a pp2000 can I do all of this myself or do I HAVE to take it to a dealer??

@AdrianDragan 4 года назад

Hi! By using PP2000 or Diagbox you can activate this option (and many more), there is no need to go to a dealer.

@kierantaylor8588 4 года назад

@@AdrianDragan thank you was hoping that was the case I have one ordered thank you

@ange2nuit906 5 лет назад

Nice video but what about my rd3 on 206 plast

@AdrianDragan 5 лет назад

Hi, Look here: www.instructables.com/id/Aux-in-jack-for-VDO-RD3-00-car-radio-Peugeot-Cit/

@IanOcampoPodRider2016 3 года назад

can you do this but use a bluetooth 12pin adapter for a 2007 Peugeot 207 with an RD4 or can it only be aux?

@AdrianDragan 3 года назад

Hello. All you need to do is replace your auxiliary cable with the bluetooth module ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-NaBDzcwQdZg.html Or you can buy a bluetooth module that connects to the RCA Aux IN jack: www.aliexpress.com/item/32821770160.html?aff_platform=shareComponent-detail&sk=_AN7CU1&aff_trace_key=c6317c96f7ae48bf8b205390025c93e8-1609275238071-02903-_AN7CU1&terminal_id=d92441f0a7b94ef29dcdfc816a4dd068&tmLog=new_Detail

@mihailuk8579 5 лет назад

Buna. Mai întâi tin sa-ti multumesc pentru tot ce ai publicat pentru Peugeot. As vrea ca sa stiu unde te pot contacta, este foarte buna si o adresa de e-mail, deoarece am cateva intrebari mărunte. Iti multumesc.

@AdrianDragan 5 лет назад

Salut, Multumesc pentru aprecieri! Poti sa intri pe pagina de facebook facebook.com/psadiyrepairs/ Scrie-mi un mesaj acolo si-ti raspund in limita timpului disponibil. Multumesc!

@fernandorodriguez451 4 года назад

a question. Where do I get the car connector to the PC, to perform the scanner?

@AdrianDragan 4 года назад

You can find links in clip description.

@gokurox1 5 лет назад

USB?

@rokasskirmantas6829 2 года назад

Will i be able to access the software thru Carly code reader? That would be interesting

@AdrianDragan 2 года назад

Hello. I haven't tried but I don't think it's compatible to access the software.

@exegersha7270 3 года назад

Hey! Does the PP2000 software run on a Mac? Is there a link to download and try it out? Thank you!

@AdrianDragan 3 года назад

Hello. I don't know if there is a Mac version. You will receive the software for Windows on CD when you buy the Diagbox interface.

@exegersha7270 3 года назад

@@AdrianDragan Alright, thanks for the quick reply. Great video, well done!

@lukeloop Месяц назад

I got an RCA to lightning cable for my iphone 13. I had the AUX 1 and 2 enabled but no audio works. I checked the cable on another stereo so the cable works but now I have no idea what to do next. I plugged into the RCA slots in the glove box and other end into my phone. I have checked volumes and bot AUX 1 and AUX 2. Any ideas please.

@AdrianDragan Месяц назад

Hello. Try with another phone.

@lukeloop Месяц назад

@@AdrianDragan I did, I think what has happened is the previous owner installed a PARROT hands free phone kit and it got connected to the radio so the RCA slots are not operatable now. I will need to unplug the parrot and see what is going on.

@jor4274 4 года назад

Hi, I've got a 207 with a Rd4N1M-03 radio(that's what's written in the side label). I just want to connect a usb without losing wheel controls etc. What do you think is the best and easiest option?(I've never done anything like this in a car). Would this work for my car? Thanks for your channel! I've got also a 308Sw and I'm also thinking in changing the radio to an android 2din as per another video you've shown

@AdrianDragan 4 года назад

Hi! What you want in your 207 you need this: www.aliexpress.com/item/32794355804.html?aff_platform=link-c-tool&sk=_sda5Op&aff_trace_key=e038ed7c59634d69aa48a461d3576116-1593370100994-06691-_sda5Op&terminal_id=3a8f5add39814c9a9eb3200bc67debac&tmLog=new_Detail&aff_request_id=e038ed7c59634d69aa48a461d3576116-1593370100994-06691-_sda5Op The best option is an RD43 or RD45 radio: www.aliexpress.com/item/32855227266.html?aff_platform=link-c-tool&sk=yIfUADK&aff_trace_key=34e357f4ea9043b99525d3af0695ae0d-1593370288494-05871-yIfUADK&terminal_id=3a8f5add39814c9a9eb3200bc67debac&tmLog=new_Detail&aff_request_id=34e357f4ea9043b99525d3af0695ae0d-1593370288494-05871-yIfUADK Tutorial for upgrade radio: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-z5D4lsLGwVk.html

@jor4274 4 года назад

@@AdrianDragan thanks! And i have to activate the auxiliary, right? (I mean, it is not plug and play)

@AdrianDragan 4 года назад

@@jor4274 Hi. Yes, you need to enable AUX IN for your radio.

@jor4274 4 года назад

@@AdrianDragan thanks!!!!

@n.grncharov 4 года назад

Hello, thanks to your video, i managed to instal the cable. I went to official peugeot service and they activated the aux input. But the problem is that the audio that I'm getting from aix input is too low compared with fm sound. Any suggestions how to fix this?

@n.grncharov 4 года назад

Is there a a option to adjust volume from pp2000? Or the problem is in something else?

@AdrianDragan 4 года назад

@@n.grncharov Usually the aux input sound is not too loud.

@eberfernandooyanedeltapia3567 3 года назад

Es sencilla la instalacion del dispositivo, yo le instale uno bloetooth la pregunta es de donde sacar el cable y el driver para entrar a la computadora del auto???? Necesito orientacion gracias.

@AdrianDragan 3 года назад

Hi. Look here: www.aliexpress.com/item/32960539733.html?pvid=e7b32e30-55b4-4e3e-8aef-52ffdc9186ee&aff_platform=link-c-tool&sk=2f6UGta&aff_trace_key=e6febbb3c8df4bce9bf153ccd587f51f-1606161086650-03899-2f6UGta&rmsg=do_not_replacement&scm=1007.23534.124000.0&terminal_id=364d159dab6d4da48c68657f8054a5c8

@anllq 4 года назад

I have problem with sound quality , i have factory aux port in my peugeot 207 gti , and radio have better sound then aux , if you can help , thanks !

@AdrianDragan 4 года назад

Auxiliary audio input needs a stronger signal, I can't tell you another solution.

@petrosst 5 лет назад

Is this cable compatible with a rd4 unit of a peugeot 207

@AdrianDragan 5 лет назад

Yeah, if it's the same radio model.

@alessandrofarina3131 4 года назад

Hi Is possibile activate the steering whell command also?thank you

@AdrianDragan 4 года назад

You can just control the volume, not change the song.

@xristosfragkou5807 4 года назад

I have a question, if anyone could answer it would be helpful. I have a Peugeot 207 and I want to do the set up for the aux cable. Is it necessary to do the part with the diagnosis? I mean will the aux input not work if I don't change it using that software in the video?

@AdrianDragan 4 года назад

Hi! Yes, it is necessary to activate the function with the diagnosis, otherwise it will not work.

@bombrc Год назад

did you figure it out, please?

@Niko18500 4 года назад

Hi. Thanks for the tutorial but I have a question. If the aux input is already activated (when I press the “input” button on the radio I have the aux 2 option), do I still have to do the second step (connecting to the computer and all that), or is buying and fitting the cable enough?

@A.andelo 4 года назад

Buying the cable is enough. You must insert the PIN in AUX2.

@Niko18500 4 года назад

@@A.andelo I see. Thanks for the reply 👍

@davidbolha 4 года назад

Hi, What about a BlueTooth Module ? Do you have a video for that too ? 🤔 Thanks ! Best Regards,

@AdrianDragan 4 года назад

I do not have bluetooth module for now, but I will order and review it. Thanks!

@marinosn.1642 4 года назад

I just received the Bluetooth module from AliExpress for the rd4 in a c2 and I'm going to test it today... From a first look the only difference I can see is that the Bluetooth module also needs 12v from the battery or a 12v rail nearby the radio. I haven't removed my radio to see if it's easy enough but I guess it'll be, even if you don't use a soldering tool to make it look like an OEM's job. It cost me 6.73€ shipping included and I live in South Europe. Took 23 days to be delivered. I'll let you know the results soon.

@amirbazzi1718 4 года назад

@@marinosn.1642 hi can i know any info of what happened with the bluetooth thing

@marinosn.1642 4 года назад

@@amirbazzi1718 Yes of course. I've installed it and it works fine. I used two Scotch locks for the two power wires of the Bluetooth module. I Scotch locked the red wire with the +12v wire of the radio and the black wire with the radio's gnd wire so as the module gets power same time as the radio. Really easy and took me less than 20 minutes including the aux source activation. The adapter I've installed a.aliexpress.com/_d6GGhHa The locks I've used a.aliexpress.com/_dT5xx9a

@amirbazzi1718 4 года назад

@@marinosn.1642 thank you !

@pamatufa 5 лет назад

Imi poti spune ce model de tester ai? Sau sa imi dai un link Multumesc anticipat!

@AdrianDragan 5 лет назад

Diagbox, gasesti link in descrierea clipului.

@czrbeats 4 года назад

Hi does this method work on a Peugeot 207 2007 plate?

@AdrianDragan 4 года назад

Yes.

@belgiancacher9727 2 года назад

Does the car need to be on when connecting the lexia cable?

@AdrianDragan 2 года назад

Hi. The ignition switch must be switched on.

@juanignaferch 5 лет назад

Hi! Could you do this in a Peugeot 206? Thanks

@AdrianDragan 5 лет назад

It may be compatible, but it depends on what radio model you have.

@juanignaferch 5 лет назад

@@AdrianDragan I have the RD3 model. Your channel is great. Juan from Argentina

@AdrianDragan 5 лет назад

This is for the RD3: www.instructables.com/id/Aux-in-jack-for-VDO-RD3-00-car-radio-Peugeot-Cit/

@juanfranciscograziadio466 5 лет назад

@@juanignaferch hola Juan ! Tengo un 307 2007 lo probé y me funcionó perfectamente !!!

@mohamedms2472 5 лет назад

There is also a solution to solder directly the Jack wires on the chip inside the radio for rd3 on 206

@nasirabdallahabubakar4762 5 лет назад

Please help me with the link were i can get this Aux cable

@AdrianDragan 5 лет назад

Find the link in the clip description :)

@emrangasi8742 5 лет назад

Hello ive done everything with pp2000 diagbox... but when i install the cable and plug my phone it makes wired noises and turns off ????

@AdrianDragan 5 лет назад

Hi, Maybe the cable is faulty. Disconnect it from the audio drive and try to plug in the phone, see if the same thing happens.

@wojtek9151 3 года назад

Hi all, any idea if it would work if I connected a USB port to the aux cable adapter through the jack. I'd like to listen to my music from my USB stick this way.

@AdrianDragan 3 года назад

Hello. You cannot put USB on the auxiliary input. To listen to music on USB you need something like this: www.aliexpress.com/item/32794355804.html?aff_platform=link-c-tool&sk=Ti3KDXE&aff_trace_key=26a0c2efe81f4fdbbf58f03234be324b-1598984892774-03893-Ti3KDXE&terminal_id=364d159dab6d4da48c68657f8054a5c8&aff_request_id=26a0c2efe81f4fdbbf58f03234be324b-1598984892774-03893-Ti3KDXE ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-52huHY_Q-rg.html

@emreozcank 4 года назад

Is it works for type A display? I think yes

@AdrianDragan 4 года назад

Yes, it works.

@r3dwood87 3 года назад

where tf do i get that soft diagnostics cable to usb from?

@AdrianDragan 3 года назад

Hello. Aliexpress: www.aliexpress.com/item/32960539733.html?pvid=e7b32e30-55b4-4e3e-8aef-52ffdc9186ee&aff_platform=link-c-tool&sk=2f6UGta&aff_trace_key=e6febbb3c8df4bce9bf153ccd587f51f-1606161086650-03899-2f6UGta&rmsg=do_not_replacement&scm=1007.23534.124000.0&terminal_id=364d159dab6d4da48c68657f8054a5c8

@JacekWala 3 года назад

Hejo. Czy trzeba wymieniać wyświetlacz?

@dipre1990 2 года назад

is there a possibility to connect usb with music to this aux cable? and can the player play?

@AdrianDragan 2 года назад

No. You need something like this: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-52huHY_Q-rg.html

@robkon8859 3 года назад

is there any other way to connect the AUX without losing CD functionality?

@AdrianDragan 3 года назад

Hello. Is the Aux socket the same as the cd charger?

@robkon8859 3 года назад

@@AdrianDragan For factory settings, pressing "source" you can switch from the radio to the CD player

@tinovalentic1979 2 года назад

Does this works on citroen c2 2007?

@AdrianDragan 2 года назад

Yes.

@lacry782 4 года назад

Anybody can help me with this problem: When i try to Save the setting ''Conventional'' the program said: Programming Failed. I use Win7 32bit before that i used WinXP buy same error on both systems. Using Version 7.02

@Josephch11 4 года назад

Stephan S I’ve got the same issue but it works fine under any other component in the car

@DrawingsUltimate 5 лет назад

Hello, when I followed the steps to change the aux input 1 to conventional from missing (with aux cord installed) it gave me a message saying programming failed and reset the setting to missing again how do i fix?

@AdrianDragan 5 лет назад

Try doing this setting without the AUX cable inserted into the drive. If it does not work it means that the car radio does not allow this activation, although I have not encountered this error so far on Aux In 1. What car and what radio do you have?

@kevquinn9213 4 года назад

Did you ever solve this problem as mine seems to be doing the same thing

@hadidu69 4 года назад

Really THANK YOU A LOT !

@A.andelo 4 года назад

This works for RD4 with “Type A” display or only with Type C”?

@AdrianDragan 4 года назад

Yes, it's works.

@A.andelo 4 года назад

Thank you!

@mindsfyteam 5 лет назад

Morning! Is this cable compatible with the citroen c4 picasso 2012?

@AdrianDragan 5 лет назад

Hi, Yes, it is compatible.

@AdrianDragan 5 лет назад

If your radio it is RD4.

@fernandorodriguez451 4 года назад

Hi. Is it useful to connect the cell phone?

@AdrianDragan 4 года назад

Yes, You can listen music from your phone using the 3.5mm audio jack, or you can install a Bluetooth adapter using the same function. To find these products (cable or bluetooth adapter) see in the description of the clip.

@Patryk-th1cc 4 года назад

Any solution for low quality sound?

@anon7661 4 года назад

Patryk probably just a shit cable if your getting static

@marcusf7249 2 года назад

hello i took the radio out and there was already a socket in the place. It is all wrapped in tape so couldnt find where it went do you know what its for? no aux anywhere else in the car btw

@AdrianDragan 2 года назад

Hello. Remove that socket from the large socket. That socket is for AUX IN equipment but was not installed at the factory, so it is unusable. You can plug the plug into your cable instead of that white socket.

@marcusf7249 2 года назад

@@AdrianDragan still promptly replying 2 years after uploading?!! what a good sir thank you

@AdrianDragan 2 года назад

@@marcusf7249 Why not? I like what I do and if I can be helpful

@kevindrescher1670 5 лет назад

Welches Programm verwendest du

@AdrianDragan 5 лет назад

Diagbox software and hardware.

@pieterdehaer3822 5 лет назад

does this work on peugeot 406, 2003?

@AdrianDragan 5 лет назад

I do not think it works, your car needs to have a 12-pin screen.

@blablabla4606 3 года назад

Hi Adrian work aux cable on Peugeot 308 radio rd4 ?

@AdrianDragan 3 года назад

Yes, it works. This radio I installed the aux cable is RD4.

@osama.h991 3 месяца назад

Hola que tal ? Le quería preguntar , que color es el cable del mando del volante que sale hacia la radio , a mi c4 le he puesto una radio y solo me falta saber el cable (kay) para empalmar lo un saludo

@AdrianDragan 3 месяца назад

Hola. Si tiene cables de alimentación dedicados para su automóvil, también debe tener un decodificador canbus detrás de la unidad Android, luego realice la configuración correcta en el menú canbus y los controles en el volante deberían funcionar. Mira aquí: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-apJts9HvIfg.htmlsi=MKO5m3LqfodvD33r

@lucasstipe 3 года назад

Hi. Does it go where the cd charger from the trunk is connected? I mean, if I connect this, I will loose the 5 CD charger from the trunk of the vehicle? Thanks

@AdrianDragan 3 года назад

Hello. As far as I know they are on separate jacks, so it doesn't affect CD charger.

@lucasstipe 3 года назад

@@AdrianDragan oh thanks. I thought the plug you disconnected was the cd charger from the trunk

@ulissesamaro9790 3 года назад

Ólha há um aparelho no mercado que se liga au isqueiro com frequência de radio , tens leitura usb Blue tuot para atender chamadas ou ouvir música não e preciso nada disso eu próprio tennho no meu wv g5 !!!😉🇵🇹😎

@ssuibell 3 года назад

Também cheguei a comprar um desses mas a cada esquina ele apanha interferência de outras rádios, a tua funciona bem ? Podes me dizer a marca ou onde compraste ? Obrigada

@joseluisconde2432 3 года назад

Doesn't it ask for a radio PIN when reconnecting it? Does anyone know?

@AdrianDragan 3 года назад

Hello! If you disconnect the radio from the power supply you do not need any PIN code, the radio security is based on VIN (vehicle identification number).