Install New TPMS Sensor DIY Without Needing Rebalance

Подписаться 11 тыс.

Просмотров 2,9 млн

50% 1

Break the seal on your tire to install new TPMS sensors yourself without needing to balance your tires again after. Do this if you are replacing an existing TPMS sensor, or if you are adding a sensor where you had a regular rubber valve before.
If this has helped you, please consider donating. Any amount is helpful.
Donate: paypal.me/gabeluci
www.gabeshacks.com/2016/11/ins...
I am installing Autel MX Sensors in my winter tires. In my previous video, I showed you how to program these sensors. If you missed that, watch it here: • Replacement TPMS Senso...
Since I posted this video, Autel has released a new sensor that can work with 315MHz or 433MHz, which are available with either a metal or rubber stem. You can order these sensors online:
eBay (shipped from China): ebay.to/2ZkR8xb
Amazon.com (shipped from US): amzn.to/3CIEwyC
Note: All links are affiliate links, meaning that when you use these links, I get a percentage of anything you spend, at no cost to you.
0:00 Intro
0:58 Tools
1:45 Explanation
3:08 Deflate
3:51 Break seal
4:41 Remove valve stem
5:31 Prepare sensor
6:30 Install sensor
8:57 Reseal tire
10:48 Conclusion

Хобби

Опубликовано:

1 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,6 тыс.

@darrinfaulkner8911 7 месяцев назад

Whether it's balanced or not the video is geniously made if someone doesn't haven't the money to have these tpms sensors replaced.He was nice enough to show random people on RU-vid how to diy, I thank him for that.

@j3lmn 10 месяцев назад

Your calm voice is the key to making hard things easy. I will be changing the TPMS sensors on my car this weekend. Thank you for the great tip!

@GabesHacks 10 месяцев назад

Thanks for the kind words! I'm glad I could help.

@TBISYTC 10 месяцев назад

Clean, simple, no bs. One of the best TPMS replacement videos on RU-vid. Thanks for uploading!

@GabesHacks 10 месяцев назад

Glad I can help!

@hjkjccdggjhvb 10 месяцев назад

yea, but he didn't show how to reprogram it ..

@TBISYTC 10 месяцев назад

@@hjkjccdggjhvbread the title of the video. And watch what was said in the first minute of the video :46

@derrsonn 4 года назад

Holy cow I wish there was a best of RU-vid. This would be on it. It's unreal that people are criticizing you for providing this free information. I'm really in disbelief. Anyway, amazing video. All the info with no extra wasted time. Awesome job.

@MR..181 3 года назад

Glad you showed this, tho im hopefully not going to buy an automobile with these, until forced by law? And environmental economic sabateurs...

@GH05TRYDER 5 лет назад

Gabe, the best DIY i've seen for TPMS replacement, nice work!

@joedavid5450 5 лет назад

The most complete TPMS sensor change on youtube. Great. Thanks.

@jamesmullen3068 7 дней назад

Gabe you are a great teacher. Very calming to work with on a subject that causes most folks lots of anxiety.

@GabesHacks 7 дней назад

Thanks for the kind words! Happy to help

@mst3kpimp 6 лет назад

this is really great, I was panicking about when my 2014 sensors would go out and what it would cost but this gives me peace of mind that I can take care of it.

@jeremyspecce 6 лет назад

I never would have thought of doing this myself but now i'm at least considering it. I think the sensors i'm getting are the rubber kind that snap in so i'lll have to figure that out, but at least I have some confidence that i might be able to break and re-seat the bead.

@erkme73 5 месяцев назад

The only thing I would caution is if you have existing TPMS sensors, you probably want to break the bead 180 degrees from the TPMS sensor. As the tire starts to come down off the rim, it'll snap the transmitter of the old sensor off of the stem, at drop into the tire. That is a BEATCH to fish out of there with rim still inside the tire. Ask me how I know...

@GabesHacks 5 месяцев назад

Oh boy... thanks for sharing!

@kizito8888 6 лет назад

The lubing, the big nut, the tightness, the soaping, and the hole in the sensor all amount to an excellent video.

@itsnotallrainbowsandunicor1505 6 лет назад

The only part that made me cringe was the cutting.

@peterhawth 4 года назад

Great video. I just paid $25 to get 1 wheel done, and that was labor only. I wish I had seen this video first! I’ll be sure to try this when my next sensor dies.

@DesertGardenPrepper 4 года назад

you're a pretty smart guy. i enjoyed watching the way you work, and i will probably do this .

@guidosartucci3316 7 лет назад

Excellent DIY presentation! Thank you!

@johnsawin8193 7 лет назад

Thanks! After watching your video I'm ready to replace my tpms sensors. I appreciate your work in posting your video. Again, thanks.

@elmeromero1794 3 года назад

This is awesome I broke one of my tpms valve stems and ordered a new one on eBay and was going to pay $30 to a tire shop to install it!

@cardo1111 Год назад

Excellent and detailed vid, thanks for posting it. I now know why my Autel TPMS sensor was packaged with the metal stick/rod 👍🏽

@GabesHacks Год назад

😄 Glad I could help!

@recorobertos 10 месяцев назад

As a car mechanic, I have to say that this was a great job well done! 😊

@GabesHacks 10 месяцев назад

Thanks!

@Hennessey_and_smoke Год назад

Canadians. Love this upload. Anyone disliked has never broken a bead on a tire. So easy. Sure you can take it in to a shop, but why not do it yourself?

@neonknightgamer8649 11 месяцев назад

Hello friend! Without a doubt, your video is the best about installing a TPMS sensor at home, "do it yourself"! Excellent, big hug!

@GabesHacks 11 месяцев назад

I appreciate the kind words! I'm glad I can help.

@jamesledger2910 7 лет назад

didnt know it could be that easy thanks for the help

@Horsedane 4 года назад

Thank you for freely sharing helpful and very cost saving experience! You're a terrific human being in my book! I'll never need or use this info but it was generous and really well done for anyone who will! Thank you for putting it out there to save people money and to learn to do it themselves! If everyone was like you maybe bigotry and hate of others would dissipate! Thank you for teaching me this today! Carol

@johndough6859 6 лет назад

Dude, thanks to you I feel like I wanna do my tire stuff myself. Thanks!!

@Iplum4food 3 года назад

I paid someone to put my new sensors in & did not know I needed the #s off each sensor for programming. I now have to get in each wheel. You saved me having to spend more money. This video made my day. Thx

@bent.cyclist 3 года назад

You can probably get Discount Tire/America's Tire to use their tool to read the ID being broadcast from each of the sensors without breaking them down. It would only take them 5 minutes, and they might do it for $5 in the tip jar. I have a relatively inexpensive TPMS relearn tool from Autel that does this, so I'd fully expect any tire shop to have the capability.

@Iplum4food 3 года назад

@@bent.cyclist I took my car to Discount Tire & they did it for free. I gave the Dude a $20 tip after. Thank you so much for your info.

@dlitedbaby 3 года назад

Good video to the point and the tip about all season tires and stiffness is great. I often remove the valve core and use rubber hose over the valve stem and air gun for extra air volume. Then with the tire on its side push and pull rim center in and out by hand, just to catch the bead. If that fails use a ratchet strap or twist a rope around the tire that usually makes it catch the bead! Thank you for your video

@flutetubamorg 5 лет назад

Truth be told, where I am, buying the stupid sensor is the expensive part. 45 bucks. Then costco will do the replacement, and rebalance for $16. But I have also lived where it's a good damn idea to know how to do this kind of thing on your own. Hey, do yall remember when we just sort of looked at our tires and checked the pressure every now and then instead of having a TPMS warning light nagging us? Those were the good ole days! Good video Gabe's Hacks

@GabesHacks 5 лет назад

Yeah.... if it wasn't for that light on the dash and my OCD, I might just ditch them. I just don't like features on my car not working the way they're supposed to. And y'never know, maybe one day it'll actually come in handy.

@Solerio 5 лет назад

Great video... Also amazed that your hands stayed relatively clean throughout the process.

@chocolatecoveredchainsaws2570 4 года назад

Thanks for the video sir. It's funny how people always seem to have to comment on something they think that is not said right or what a tool is called by different people. Thanks for sharing your time with us.

@GabesHacks 4 года назад

Yeah, it's ok though. I have thick skin 🙂

@trssho91 6 лет назад

Good video, just a small tip... if you have a hard time with the tire sealing on the bead you can use a ratchet strap around the outside of the tire...when you tighten the strap it will push both sides of the bead outwards. :)

@GabesHacks 6 лет назад

That's a great idea!

@aditspacefx 6 лет назад

Thanks for the nice tutorial

@CaptBill69 3 года назад

Nice how to clip as I take in refresher before doing four. Saw one similar lesson where guy used a scissor jack under a rear car trailer hitch, and maybe a block of wood, to break the tire bead. Got a very reasonable quote on phone from local tire shop to reprogram my new tpms numbers into my car computer, after I install then myself; planning to photo the units I install, and have good record of each number on each of them, and which tires those numbers went to, to make for an easier tire shop update. Wish I knew those units have above a 10 year life expectancy before my last tire change, because I would of done this at last tire change, if I had known that. ... Thanks for clip :+)

@pablogutierrez1009 3 года назад

Thank you for a very informative, concise and thorough presentation.

@israelsimmons 4 года назад

All the dislikes in this video are from folks working in an automotive service store XD

@slyfox1983 4 года назад

😂😂😂😂😂

@jimierogers9022 4 года назад

Nah just people that know what they’re doing and realizing he doesnt

@sovietcomrade7733 4 года назад

No, just people that likes their wheels balanced

@GabesHacks 4 года назад

For the sake of others reading this, I talked about balance at 2:17. If you replace one sensor with another using the method I show, your wheels will still be balanced. But by all means, if you have doubts, get your wheels balanced.

@jamesking6272 Год назад

What dislikes? 😐

@joebloggs7828 7 лет назад

Great video. Would never have thought that was possible to DIY. Cheers mate.

@tousshong9438 6 лет назад

Great Job! This will eliminate us DIY guys/gals a trip to the shop an avoid paying $$$

@markhair2214 7 лет назад

Great video. I just received 4 new tires, a TPMS and have refirbed OEM rims on the way. The TPMS instructions are in "engrish" and a little hard to understand. This video explains it well.

@billh3860 5 лет назад

If concerned about the sensor dropping down into the tire (Yikes to that!), I used a small freezer bag and set it down into the tire where I'm going to place the sensor. If you drop it... it'll drop into the bag for easy retrieval.

@messinround6554 5 лет назад

Great vid. I give it 5ive stars

@tranquilinopadilla1668 6 лет назад

Thank for posting this diy tech service. I am a lot tech at a used car lot and found it helpful.

@nmkalbalooshi 2 года назад

The best explanation for TPMS installation

@WorldisAmazing. 2 года назад

Great video brother

@bmin1022 2 года назад

Thanks so much for your video. I have tried several methods on RU-vid, however only your way worked for my tires. Saved several hundreds of bucks.

@GabesHacks 2 года назад

Awesome! That's what I like to hear.

@PoeLemic 5 лет назад

Wow, GENIUS-level hack. You make this look so easy. I think that I can do it. I will change my Nissan Armada 2007 ones. Thanks.

@MACTEPKBACC 4 года назад

I just wanted to replace TPMS sensor tomorrow at Walmart. Now I'm gonna do it by myself. Thank you very much for this video!

@GabesHacks 4 года назад

Let me know how it goes! Just remember that you car needs to know the new sensor is there. Some cars automatically learn new sensors, so you don't need to do anything. Others have a manual procedure you can do without tools. Others must be programmed with a tool. So just be aware.

@dionkraft6782 4 года назад

I went to my WALLMART and they said they don't install TPMS sensors. I had my Prius with two dead TPMS sensors that had dead batteries in them. So the other two were good. I had four tires installed. I replaced the dead TPMS sensors....I scanned and could not clear the code error...guess what ? After the new tires were installed...Wally killed my two TPMS sensors that were good prior to new tire install ! Wally said since the TPMS light was on its not their fault. RANK AMATEURS...

@GabesHacks 4 года назад

@@dionkraft6782 Yeah, I've heard similar horror stories about Walmart...

@Fun4GA 4 года назад

If you chalk the tire and rim, you could completely dismount the tire and remount it to it's original position - so no rebalancing required. Good video!

@sovietcomrade7733 4 года назад

Actually you need to rebalance it anyway.his wheels are unbalanced here. This will wear out the bearings and ball joints faster. Yeah, it's gonna be like 5000 dollars to repair a mistake made to save like 50 dollars

@GabesHacks 4 года назад

It's difficult to put the whole tire on in the same position. If you use the chalk method and manage to get it back on in the same position and it's still balanced, then all the power to you. I think I'd rather keep one side on. And don't listen to José. If you replace one sensor with another using the method I showed, the wheels will still be balanced, like I discussed at 2:17. I know because I've done it. He hasn't.

@sovietcomrade7733 4 года назад

@@GabesHacks aNd DoNt LiStEn To JoSe......

@Fun4GA 4 года назад

@@GabesHacks Good point. Keeping on side seated assures the tire doesn't rotate on the rim.

@BILLHOVER 4 года назад

Always wipe the rubber bead and rim clean where they meet before re seating, as this may help to stop leaks and save time after reseating.

@klogjo 4 года назад

THANK YOU FOR YOUR TIME, REALLY HELPED

@josegarrido7021 2 года назад

Best video i've seen about tpms replacement, thx!!!.

@thefireman285 5 лет назад

Absolutely an excellent video. Thank you for your time and effort.

@19safe53 7 лет назад

Good job, you helped me a lot.

@jeniferdiamond7723 3 года назад

Huge help thank you, the trick to pop the tire off the rim is great. Also like that you are using same sensor I have on my car. Would like to add for people like me who already have sensor in tire to pop the tire off the rim on the opposite side of the the valve stem so not to damage the sensor.

@havingfun6981 4 года назад

Excellent tutorial! That is just what I needed to know.

@FreshurDenUent 4 года назад

The sponge bob reference was content enough to like this video! thanks

@tinkerbell69714 2 года назад

I knew there just had to be a cheaper way to replace my tire sensors. Damn shop wants to charge me $480 for replacement of (4) tire sensors. After I just purchased a brand new set of tires. He claims to be giving me a discount. Damn 🤡s…. Great video!! Thank you for sharing💋

@GabesHacks 2 года назад

Yeah, that's silly, but unfortunately not uncommon.

@karlrschneider 4 года назад

Thank you! This is a very helpful and clear video, you did a great job here!

@lizirizarry1793 3 года назад

Super informative and your camera stayed nice and still. Thank you!

@richardschwarz738 6 лет назад

I was going to take my car to a shop to install new sensors until I watched this video, now as a result of watching the video I`ll do it myself !

@bremCZ 6 лет назад

Richard Schwarz They still need rebalancing.

@dirsorocks 5 лет назад

I dont know if youre stil active; but I eant to thank you for posting this video. I just finished replasing one of my sensors following your video. It worked. Thank you.

@GabesHacks 5 лет назад

I'm still around 🙂 just haven't posted in a while (although I have something in the works). I'm glad it helped!

@THETOPGLOCK 6 месяцев назад

Definitely using this method to do the other 3 on my wife’s car. Discount tire did one for me last night at $40 and I provided the sensor. They basically used this method but on the machine. They only broke one bead and didn’t rebalance. Just put 1k in tires on the car 3 months ago and still no break from them.

@GabesHacks 6 месяцев назад

I hope it works out for you 👍

@mcr0ok 5 лет назад

Very nice, thanks. Today I spent 20$ to change 4 valves (includes common valves and wheel balancing). $20 is not a problem, but I spent about 2 hours in a tail. It would be easier to spend 1 hour and 2$ and do it myself.

@dongduong6281 3 года назад

Great video, people who don't know or don't want to learn when watching the guy do this job ( amazing job) they just gave thumb down. Anyway, your video really clearly step by step and easy to the home job. Thanks.

@lilasengamage8870 3 года назад

@NikolajNhrRasmussen 3 года назад

Fully agree!!!

@wuxianku 6 лет назад

This video is exactly what I need. Perfect job

@borgsimpson935 3 года назад

great video. I've never replaced a TPMS. will try this technique. with one extra step to keep tire and rim in the same position. a mark on the tire and rim.

@muchohombre4594 4 года назад

You guys are great! Thanks for the info and show-n-tell.

@jameskeeler6321 2 года назад

Great informative video. In the old days we would just kick the tires to see if they were up to pressure. Modern problems ;-)

@Crispercas9 7 лет назад

Your videos are very good and precise with all the information required for the job. Very well done.

@jp3npt 7 лет назад

Really nice demo and camera work, Gabe.

@alancall5113 6 лет назад

Awesome video you save me $25 good stuff keep them coming I love the way you use the wood to break the seal nice idea

@kyleforrest2220 6 лет назад

good video buddy. discount tire is trying to charge $60 a sensor. just gonna buy off ebay...all 4 for $60 plus free shipping and do this shit myself

@TuoiTreVaooi 3 года назад

Impressive how you break the tired seal with pieces of wood... I think that's the hardest part that I wasn't able to do it at home...

@GabesHacks 3 года назад

It doesn't always work. If any sealant was used on the tire, then it won't and you can use a different method like this: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--VICFao8Mjw.html

@rubiconklbrutorowman7577 Год назад

Excellent video with *very detailed information that is very much need to do the job right! Well done Gabe!

@GabesHacks Год назад

Thank you! I'm glad I can help.

@mohammedaslam8145 4 года назад

Best video for tpms valve install. Top man.

@frankmontez6853 Год назад

At Discount Tire and they tried to sell me on replacing all four sensors but mechanic I’ve come to trust said just do the one bad one. They said the when one fails then the other ones are about to so it’s good idea to replace all of them. Been two months the others still been good.

@GabesHacks Год назад

Yeah, I mean, they aren't necessarily wrong. The others will go at some point down the road. But there's also the chance one was a lemon and went much sooner than it should have.

@frankmontez6853 Год назад

@@GabesHacks but they said soon after they bound to fail. I almost took their word for it but asked a trustworthy mechanic I sometimes use and he said no they can last for a long time.

@VeganDog 4 года назад

Good video and don't worry about the negative comments. The internet is full of arm chair experts that can't even change a light bulb!

@GabesHacks 4 года назад

Thanks 🙂 I don't worry too much. I only reply for the sake of other people who may think what they say makes sense. And sometimes I actually learn something!

@manuelserrano6129 2 года назад

Probably the best DIY about TPMS install

@GabesHacks 2 года назад

That's high praise! Thank you 🙂

@America1st69 2 года назад

Sure this may work good on a steel wheel but try doing that on an alloy wheel especially one that has a wide tire

@GabesHacks 2 года назад

@@America1st69 Yeah, it may not work for every wheel type.

@varl2004 5 лет назад

Thanks, one of the best DIY videos I've ever seen.... greetings from Chile!

@GabesHacks 5 лет назад

Thank you! I have actually been to Chile - back in 2001. My dad is from Chile.

@djquestionthis 5 лет назад

Great video, you are the reason i love youtube!!!

@djquestionthis 5 лет назад

Hey Gabe, have a great day man, you're a smart guy. I checked out your other vids too, great content! If you have ig I'll follow you, im at @djquestionthis

@MRRMS116 5 лет назад

Same lol

@MyEyesBled 5 лет назад

Don’t forget to first clean the valve stem hole surfaces in both the outer and inner part of the wheel before installing the TPMS unit.

@rickquest6385 7 лет назад

You made that look very easy, nice video!

@tomfilbey 2 года назад

Thanks for this video. I used your techniques today. Worked perfectly.

@GabesHacks 2 года назад

Awesome! Glad I could help.

@drkshelton2313 6 лет назад

love the video man..really helpful and you did amazing job

@ethanwhite5108 3 года назад

Best video of the year

@personperson9591 6 лет назад

Awesome! Bought a used car, a few weeks later one of the tpms stopped working, can’t program it but the others are fine so I know it’s just the sensor going bad/battery died, and while the tires will need to get replaced sometime soon, that’s likely several months away, so might just be going this route. Not sure some of the negative comments here, guess that’s RU-vid for ya, but the video was great, immensely helpful and straightforward.

@GabesHacks 6 лет назад

Just be aware that you may need to teach your car the new sensor. Some cars automatically learn new sensors, but some don't. So you'll have to look into that for your car. I go into that in more detail in my other video that I linked to in the description of this one.

@personperson9591 6 лет назад

Yep I have the process for my vehicle, fortunately my '08 still has a manual process you can use without a tool to learn.

@rafaelk1631 3 года назад

Superb demonstration thank you for sharing

@rogerbuford6561 4 года назад

Very nice video. Thank you!

@B_HarTz 5 лет назад

Great video if I have to do this, lol I hope my factory wheels I just purchased has the sensors already in them, otherwise I’ll come back tot his video to learn how to do it lol

@TheGhost28 5 лет назад

Most the time they will not have a sensor. Just to give you a heads up. 🙂

@B_HarTz 5 лет назад

Erica Campbell yaaa these wheels I got are factory wheels for my car that I bought from someone and good news. It did have the sensors on them... bad news, the batteries are dead 😭😭😂 so my TIre sensor light is still on 😕😕😫

@Vasbyt2 2 года назад

That's an awesome video. I really appreciate you sharing that with us all, I just ordered my replacement TPMS sensors and the relearn tool now that I know the process to get them installed!! :-)

@GabesHacks 2 года назад

That's awesome! I'm glad I could help. I hope it all works out for you.

@nbur5645 7 лет назад

Fantastic DYI demonstration. The step by step with visual and speech was spot on. Even added tips which is what most people look for when researching youtube videos.

@car24dude 5 лет назад

Job well done. Please show how the program it.

@GabesHacks 5 лет назад

I talked about how I programmed mine here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-N6p6xV4PlHc.html I used programmable sensors, so I programmed the sensors themselves because I wanted an identical set for my winter tires. You could also get normal sensors and program the vehicle (which you need a different tool for). But some cars automatically learn new sensors and you don't need to program anything at all. It depends on your car.

@michaelbright1569 6 месяцев назад

Dude yoire a lifesaver

@GabesHacks 6 месяцев назад

Glad I could help!

@techsir8866 4 года назад

Excellent and informative video!

@johndn9238 Год назад

Very well explained and excellent video to show what you were doing at all stages. Many thanks.

@jimmymolinaro7554 3 года назад

Encouraging video up until the last 10 seconds when you say "don't expect all seasonal tires (which most everyone on the planet has) to be this easy, they're much more difficult"!

@GabesHacks 3 года назад

😁 Yeah. But don't let that discourage you. You can still do it.

@ScarabChris 4 года назад

Nicely done. I hate that tires is nearly the ONLY thing I can't do myself because I don't have the equipment to mount and balance tires. So this means a trip to the tire shop to replace a sensor. I like this method though I wonder how much more difficult it would be on a low profile tire like a 305-40-22.

@GabesHacks 4 года назад

Thanks! I do imagine it would be harder on low profile tires, but I've never owned any.

@LeeTxai 4 года назад

Low pros would not be fun as it's already not fun with a tire machine.

@zijie-he 3 года назад

Thank you, quite clear and informative.

@Kolbra2004 6 лет назад

Good video. You are very clear on how to do it!

@Hilary-ys1gk 5 лет назад

Money saver, I’m doing this next time. I do all my engine work , tranny and the only thing I couldn’t do is tpms sensor. I ain’t paying $400 bucks for an easy fix... nope

@MrBubbadon 5 лет назад

The bead on his tire broke really easy. Mine was MUCH more difficult. I had to slide the tire up under the car, place a piece of 2x4 under the car and on the bead and let the car down on it. I used very long levers and it still wouldn't break. It took the weight of the car to make it work,

@turo669 5 лет назад

I'm right there with you Hilary 2020😂😂

@GabesHacks 5 лет назад

@@MrBubbadon Whoever mounted the tire last could have used a tire sealant (it's usually a black goop). I had to fight with this when I moved tires for my car to different rims. The method I used in this video didn't work at all. I used the method I saw in another video using a jack: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE--VICFao8Mjw.html

@BritIronRebel 6 лет назад

For once someone who can do a video correctly, clearly, and imparts the little extra advice where needed. Great job!

@GabesHacks 6 лет назад

Thank you!

@HardRockMaster7577 6 лет назад

And there was no distracting background noise: tvs, babies, road traffic...

@Owens_Racing 5 лет назад

Nice shoes. I had the same pair I lost in a house fire. Man I’m guessing the rest of my life I’ll run across stuff that will remind what the fire took. Good video btw.

@GabesHacks 5 лет назад

Sketchers! I think I went through 3 pairs of those (just bought the same ones again when they fell apart). I moved on to another kind now (no laces - I always left them tied and slipped them on anyway) but I still keep these as my "work" shoes.