Easily the most helpful video and explanation without all of the corny commentary and nonsense I’ve seen in other videos. Straightforward, calm and just plain helpful. Thank you. You saved my life. Also, millennial here- didn’t have a level to use on a refinishing project I was doing and ‘eyeballed’ it. Hats off to boomers that are tech savvy and showed me there’s an app for that 😂 thanks again! Cheers
LoL! Thanks for the awesome review and support. BTW We're Gen X and Old school Tech Savy, but may sometimes be confused for Boomers because we look and sound the same. ;-)
My 12K I ordered over a week ago finely arrives tomorrow. Replacing a very noisy standard type ac. I am most looking forward to the reduced noise this unit claims to have. Thanks for this guide, it will make for an easy install. 👍
Just ordered one of these tonight for the upstairs large bedroom in a house built in 1926. Old wooden single pane with storm windows. Hoping the install isn't prohibitive like other old window AC's in the past. This one looks pretty well designed.
The product is mis-labelled. AC is converted to DC by means of a rectifier, not an inverter. An inverter converts DC to AC. If you have AC outlets in your camper, you have an inverter which converts DC from the battery.
works great. BUT, if you ledge sits too far out plus is deeper than the drop of the pair of outside braces, then maybe reconsider purchase, OR plan a way to have the outside to sit on such a big ledge, MAYBE bricks, or something, BUT you must make sure that you set that up so your outside of Medea inclines the recommended. READ the manual. Great cooling power. Decent features. Home Depot app or Manufacturer has the installation instructions, READ BEFORE YOU BUY. Definitely cools nicely. Definitely quiet compared to most others because the heavy duty motor is outside.
Considering the 12k unit for our vacation home we shut down in the winter. To minimize upkeep, is it ok to leave this unit mounted year round, or is that not recommended?Great tutorial btw!
People do leave them mounted all year round and it generally is not a problem. You do not want to run the compressor below 45 degrees however, so maybe unplug it to be safe. The newer models also have a rubber plug on the bottom (outside) that should be removed for extended inactive periods. Replace the plug when putting it back in use.
I like to remove them for multiple reasons, but it's not required. It's very easy to remove and reinstall on the same window once the initial setup is done.
This same Unit is being shipped to me Today! Do you have any tips/tricks to help push air out of the door to help cool the back part of my home? This was a Great Tutorial, hope mine goes as smooth ?!! Thank You
@@elitehandyman911 Yep, tigertoorh. question is for when i redo install. Was not so neat. Ps: Have unit since June 2023. One year convinced I won't choose to fall back to anything using accordions. 12:14 Always more trust on RU-vidrs either unsponsored or proven reliable if sponsored.
This unit looks great and seems simple to instal. My problem is that all my windows are side-sliders. Are there any air-con that coulld work in my windows without putting some plywwod or plexiglas sheet and have a non-operating window?
The only twp options for you are a casement a/c like this * amzn.to/4dp4Y2k or a portable unit like this amzn.to/3AePcJ1 with a window kit like this amzn.to/4c7zQmU
Do I have to take off drain plug after installation to drain water, you didn’t say in your video, if I don’t take it off, will it be there any problem?
Would this fit in a window smaller than 22"? My biggest window is about 19.75" wide and see the actual unit is about 19". Possible to set this up in that size window if we make our own shelf/mounting hardware to support the unit?
For width you could definitely make it work. Even the bracket could be easily modified. You would have to remove the insulation brackets and do some custom insulation work. The height requirement is a hard 13 inches though to be able to get through the window. Please let us know if you go for it. And if you're in the Boston area we're able to help with the installation.
No drain hole for now. The condensation flows from inside to outside via gravity, then once outside, sits in the pan and gets splashed up onto the condenser coil. That's by design. This makes it more efficient than other window A/C units. There is a rubber plug on the bottom of the pan of some models, but only use this to empty the pan before storing for the winter then put it back in.
Seems like the entire north american continent have those double-hung windows, except us. Stock with those annoying sliding window, meant for who know's planet.
I just got one of these, but foolishly realized that since I have a double window, I have no way of screwing the bracket to both sides of the window frame. I am hoping there is a way to solve this problem.
You can offset the bracket and a/c to one side securing as normal. For the other side use the longest leg and screw it vertically into the sill. This is why there are holes in the bottom of the legs too. You will be missing the internal window lock bar, but the screws will keep it safe. For the insulation you can get hard insulation at any home store or get midea replacement here * - amzn.to/4bBkZ40 and glue two together together. We use just a few dabs of super glue. If you're in Greater Boston let us know and we'll be happy to help.
@@elitehandyman911 Oh. yeah....I see the holes in the bottom of the bracket....Duh me. :D But can you explain why you have to offset the unit? I wish I WAS in Boston....thanks!
Hey, I am currently installing this however I do not have enough space for the drill-holed screws on the sides of my window. Alongside that, in the middle of my window it is plastic so can I just drill through that aswell?
I wish you could attach photos. The plastic may slide up? Also you can drill and screw vertically down through the mount arms if the sides don’t work for you.
@@elitehandyman911 Thank you for responding! unfortunately, there is nothing under the mount arms as it is hanging from my window. Will update you on the install, but if the screws are not in place per the manual, do you think that this would still hold the A/C correctly?
Just purchased one started install but it looks strange to me from the outside as far as how the unit fits in the bracket ( it does not come to the end. In other words the bracket extends about 6” beyond the actual unit. Neither the manual Nor any install video I’ve watched thus far shows an image from the outside. I’d like to know what the installed unit is supposed to Look like from the outside.
hello, i have the same midea but mine after a few months stopped working. like the fan mode works right but when i change the mode to cool it starts to start the motor then boom the motor stops and it shows error code "EC 07" please help!
Meaning the electronic control has detected the unit is reading one of the temperatures incorrectly. EC 07 error message is not considered a user repairable error. The good news is that most units can tolerate an EC 07 error and still continue to cool.
