INSTALLING A 6.4 HEMI TRUCK INTAKE MANIFOLD on a 5.7 Ram 1500!!(AMAZING RESULTS) 

I really wish the Ram 1500 just came with a 6.4 straight from the factory.

Hey brother i know this is an older video, but im interested in doing the 6.4 manifold swap and i also want to run a catch can. What was the end result with your catch can set up brother?💯

I really wish folks would do a pre and post dyno run to gauge the effectiveness of these mods. That's the only way to show if the change is worth it. This comment is NOT just aimed at this channel, but ALL channels that claim increases from mods.

Sounds freaking sweet I'm jealous. I hope I can get a 6.4 intake installed on my car someday. Dude I literally can't wait to see your new times at the track good luck brother!!!

Good use of the time, can’t wait to see her back at the track

Man honestly i love people like steve i know 4 of them they are chill asf and iknow their stuff

So that 6.4 manifold bolts right up to the 5.7 ?? That's sweet.

I knew you couldn't end the vid without giving us some exhaust cam choppity chop action lol

Thanks for doing this video Nick and having your Mechanic Steve do it as you already know I just bought a 6.4 intake manifold and I also bought it on eBay well hopefully you get more power out of it and the results you are looking for 👍keep them videos coming!!!!!!!

It’s a good install. Installed my ported 392 manifold about 2-3 months ago and once Jay dialed it in, i could feel it hit harder over the super rich base tune. Took about 5 revisions, but he worked his magic! I’d say those numbers area little overblown based off so many other videos of this mod posted, but time will tell.

Thanks Brother I have a 5.7 1500 Classic Quad Cab and I’m getting it going. I have a ported fastman TB, AFE Momentum GT Cold Air Intake, Stainleass works Headers w/ High Flow Cats, Stainless Works S-Tube Mufflers w/X-Pipe, and HP Tuners MPVI2. This is what I’m getting next and I’ll have it all installed. I’m gonna have Jay Green Tune my 5.7 I’m just unsure on the Fidanza Aluminum Flywheel and the Pulleys......?? But thanks for the video!

Just did this mod yesterday. Thanks to the info on the hose connections this made everything a lot easier. Wish there was instruction for more in-depth installation as I didn’t know going into this that some of the brackets would not be reused. Your video helped with that so thank you.

30 whp & 30ftlb... bolt on... that's a great bolt on... next on the list for winter 2020/21

Hello from Canada Nick! Another great video, and can not wait to see the improvement the intake will make!!

cant wait for that 5.7 ported intake!

thanks for the video seems like there isn't alot of in depth truck videos. just bought the mmx 6.4 for the 5.7 with full headers back cant wait

Love your content! I have a new body style 1500 quad cab 4x4 didn't know the route I wanted to go when I got it but now thanks to your videos I do! I don't think I'll do much more than bolt ons at this point but for now I'm going to try and go 13s once the track opens up, not sure what it will do being stockish for now but if you have any tips or tricks on how to get there I would love to hear them! Keep the great content coming!

Could you do a quick video on where you got the manifold, what all you need for the swap, and prices etc?

The truck 392 is completely forged the whole way through, including the crank. No one else builds their motor that heavy. If they put that motor in the 1500, it really wouldn't do much good for performance. You'd be better off doing this to a 345ci. Plus cam, long tubes, and a tune, you could climb the hp pretty quick.

After installing the 6.4 manifold did you notice any daily economy gains? Just wondering with all that gain being down low if it helped the truck haul itself around town better haha.

Down graded from 2020 to 18 to save money so I may be doing this 😂 🙏🏽

Damn that intake looks monstrous

I'm doing the MSD intake manifold for my 6.2 denali 18 then 90 mm throttle body from bbk

Look at how pretty those heads are!

BTW - I really like this channel, and truly appreciate what you do here. Thanks!

If you are running a 4x4 , wouldn’t you have better launches racing in 4x4 ? Isn’t any truck quicker in 4x4 versus 2x4? Third , do you only replace the rear transaxle ? Is your truck able to use 4x4 at all ?

If I did this and ever needed a warranty claim, I could just say, "Hey, it came that way!" Ha ha ha!

How did that oil catch can do for ya?

I think its a great idea that speed freaks would do

Good thing it’s plastic and not like the old days cast iron.

Niceee Uprgade 👌🏼 but those but connectors are huge pet peave for me i wouldve gone with sodering the wires for no future wiring issues 🙄

Dude I love your channel and info. That truck is beast hell of a job. I got a 6.4 intake manifold. Do you happen to know the part # for the egr block off adapter by MMX? I can't find it. Thanks man. Good shot. Keep it up.

What happened to the oil catch can at the end? Saw it was gone and you had a filter in place.

Can u put link in description for all the stuff u needed to buy to make this intake work?

Would this work on an 08 1500? Lmk im wanting to build my truck currently just running a Diablo sport tune.

What oil catch can do you have can you add a link. Your videos are awesome man and very helpful.

Another good video and mod.

Are you used the same spark plugs? Or the 6.4 needs a different ones?

Who taught this guy how to extend wires, crimp connectors are a weak fix. Solder and heat shrink would be the correct way to extend those wires.

Other than a tune, can you list parts ant their oem part numbers for ,e so can order them I been asking around for this mod for months n no one could tell me parts at first I asked jay a while back like a year ago n he didn't know exactly what would be involved cuz no one had done it back then yet lol, but now I keep seeing more of this 6.4 swap more often

How did your fule use

On exactly what truck would that intake manifold be in I thought the 6.4 was a diesal

What if you have a 6.4 manifold off a car can I get the mds for the long runners to work ? Or do I need a truck 6.4 ?

Hey mate.How easy was it to get the truck Intake manifold complete. Expensive? Salvage yard? Cheers. Great video.

How much was the tune?

This will definately be next. 😈

Wheres the throttle body Im planning in buying the 6.2 manifold from modermuscel. Just not sure if i should upgrade my throttle body

Is a 6.4 cold air intake needed with the 6.4 manifold? I see that it’s offered as an option when purchasing the 6.4 manifold from either moes or mmx

I suggest you get a vented hood to have the engine running cooler

How would a pro charger stack up with your current Cam ? Since you gain alot of top end power and a centrifigul supercharger optimizes top end horsepower 😬 would go great with all your current mods 🤯

They go for 700-900 bucks used at that point just buy aftermarket

So is it not worth porting the stock 6.4 truck intake manifold? I just see the option to do it on Moes and MMX websites. Would it gain more power and torque I'd you did that? Or is it not worth the $350 dollars they're charging to do it?

Incredible hemi what numbers are u pulling on dyno? U have cam,tune, intake,anything else?

so im being told i wont get any gains doing an intake manifold swap/bigger TB unless i add Boost??

When will you hit the dyno? Ohhh on your way to the 11.47 pass I said I while ago!! Great job!!

is there not a connector from the 5.7 EGR ? what did you do with that ? it doesn't trip a trouble code ?

Hey bud. Thanks for your video. I am in a different situaltion than you. I am replacing a 5.7l with a 7.0l (6.4l) on my 2012 2500. It's also procharged. I hear you mentioning the victor in your video..... i actually own couple of these intakes but not sure I can use them in my truck. The throttle body comes straight out like on the cars rather than 90 degrees like the 5.7l intake on rhe trucks and interferes with the alternator. Thanks to your video it at least looks like I can at least put a 6.4l truck intake with rhe offset throttle body without too many issues.... have you looked into the victor setup dor yourself yet? Modern Muscle sells a relocation kit for the alternator and ac, designed to use the mopar 6.1L intake, but I am unsure if this will also work to mount the edelbrock..... my guess is yes, but I haven't spoke to anyobe else who has tried yet.

I ordered mine from mmx a few days ago ported, I’m excited. Not sure what to do for an intake. I want to see if I can route it to my 5.7 s&b box.

Hey I just have a couple questions...so what cam do u have and what other internal parts did u start off with...I seen you did the 6.4 manifold and a cam with tune and cold air intake. Is that all you started with

I have a 2012 ram 1500 my 6.4 intake came off a newer ram truck after installing it i got a bunch of codes now tractiion control light on deactivation #7 cylinder #7 injector open circuit battery light flashing any ideas where i went wrong o and it doesn't shift to 5th gear smh

What did it do to your mpg??? Asking bc mines a daily driver

Think it fit the 5.7 Etorque 2021

WHAT PARTS WOULD I NEED FOR A 2008 HEMI 5.7 RAM

No MSD kit for the active runners? Is this an older setup with VVT or did you just disable the active runners on the 6.4 intake for now?

Hey brother I'm having trouble hooking mine up. Could you possibly give me the information of how you tied in the vacuum hoses and brake booster? I'd really appreciate it. I've been wrestling with it for a couple of days now and ready to hit the road but she keeps dying on me

Dude 👌 so happy for you, so if I get the victor II do I need to change my torque converter and if you explain why

do you know if it fits a ram 1500 with 5gen hemi? does hemi 6.4 maniflod from any year fit well? do you recommend buying it used?

Did you use the stock 5.7 map sensor? I just finished and loaded the tune. Says map sensor is messed up. Thx

You have a very nice tick right there.

Did you use the 5.7l TB on the 6.4L manifold or did you get a new one? Thanks

What injectors are you running bro I’m thinking of getting the same manifold with hell cat injectors to go on e85 I heard I have to get tuned

I have a 2011 Ram 1500. I'm trying to do the same thing to swap out the manifold. Do you know what year charger? I need to get this 6.4 manifold out of?

Love the channel. Excellent videos. Does the 5.7 SRV need to go on the 6.4.? I found a salvaged 6.4 that came with nothing for cheap.

Are you getting it tuned now

sounds awesome

Did you have the cam before the manifold?

was that 20 HP gained from the intake and injectors?

Can this be done on an 04 5.7 ? I have a 04 st 4x4 5.7

Need some pull video/impressions

Nice! Why the 6.4 manifold over a ported 5.7 manifold?

did that catch can work? catched any oil?

Can u use your stock throttlebody? On the 6.4 also do u feel the 6.4 is better ported then just porting the 5.7?

Is a tune required afterward or just swap and go?

Can this be done to. 3rd gen Ram 1500?

6:45 Oddly satifying!

Where can I get a ported 5.7 intake

Can 6.4 manifold fit the 4.7

Glad your liking that 6.4 - awesome, she is going to be ready for the track! How was the drive immediately after words... (MILES of SMILES i know) 😃😊😊

Awesome video. Are you using factory spark plugs? In the past too?

I really need help I just did this swap with a ported 6.4 manifold and 90mm tb also ported. Once I turn on the truck it make something at service electric control throttle body, would that be bc it’s not tune yet or did I do something wrong? If you can answer me I’ll highly appreciate

Nice bro nice. Can I put a 5.7 manifold on a 4.7 v8?

Can you do this to the 3rd gen dodges I have a late model 3rd gen 5.7.

Low low 11s coming soon I do believe

would this work on a 2005 ram 5.7?

I really appreciate your vids but you have to slow down on moving the camera around so fast. Can’t get a chance to see what’s up

What I need to know, will the 6.4 fit on the 2005 5.7? Also what are the differences in power gains?

So for the 6.4 intake manifold on the 5.7 do you have to get an actuator for the active runners?? Or can you just install the manifold without touching the active runners and when they come on?

Did you use your factory throttle body or the 6.4 throttle body? Hear people say this swap works well for low end torque did you find this to be true? Also I’m looking at doing this on my pickup for towing trailer purposes is it suitable for that?

How big is the opening on the 5.7 intake manifold ? And is the 6.4 the same size opening ?

Other than the manifold (which results in the higher horsepower and torque), what is the difference between the 5.7 and 6.4 Hemis? Like if I were to make this mod to my 5.7, would I technically have a 6.4? I’m new to this so I apologize for my lack of knowledge on the subject.