*Works so well **Fastly.Cool** that it only requires daytime operation until high temp and humidity are overnight. It is difficult to get to side filters, but back is easily accessible.*
This video is basically necessary to understand how to install one of these things. The included instructions are almost entirely useless and have next to no details about any of the things shown in the video. Examples of where the video is vastly superior to the included instructions: 1) Explaining that you will likely need power tools to install the window kit 2) Showing you how to actually use the adhesive foam (where to stick it and how much of it to use) 3) Explaining the purpose of the non-adhesive foam 4) Telling you that you need to screw the window kit into the frame/sash, and that doing so may require you to pre-drill some holes 5) Showing you how, why, and where to install the security bracket 6) Being clear that you will need tools (like a saw or Dremel) to cut the spacer in the window kit to the correct size, if it doesn't fit your window 7) Detailing the purpose of the included hose and what the various drain holes on the back of the unit are for The included instructions are basically “draw two circles, then draw the rest of the owl.” If you aren't an appliance guy already, you've got no chance of getting the installation correct without a video like this, and the efficiency of a poorly-installed unit is significantly less than one which is installed well.
Thanks so much for uploading this. I just got one of these and wasn't sure if it was necessary to have a drain tube connected full time for "cooling." Now I know that I do not. Excited for summer to be here so I can see just how well this thing works!
Thank goodness for this video. We read the instructions and were stumped. We have a 118yo Craftsman home. We are having to do some work arounds but hopefully we will have it cooled down in here. I'm not liking the heat.
Depends on how often you want to move it I suppose. I leave mine in the one spot all summer. There are only 4 screws....2 into the window frame and 2 into the window sash. They can be removed in 2 minutes at the end of the season & stored away with your unit for next year. The advantage to the screws is that they lead to a 'solid' installation (not flimsy) and are critical to sealing
I don't understand how you "kind of" defeat anything... you either do or you don't. This is portable because you can move it around from room to room; the whole unit is not attached to the window, just the insert that lets you vent the hot air. Plus... you don't have to permanently screw the screen into the frame anyway. Also, you can buy just the insert for a second window or door and install that; this would really make it portable.
I have a different brand portable ac unit, but very similar to this unit. Your video was extremely helpful! Thanks to you, I was able to set my unit up 🙂
I need something like this in my garage for when I want to do some woodworking since it is almost 130 degrees in it during a Texas summer....but I have no windows, so I would have to drill a huge hold in the wall somewhere to add the vent hose, similar to the hose coming off my clothes dryer.
Thank you for this nice video. Lots of good, detailed information. However, it would have helped to also show how to install in a window that slides right-to-left, not just up-and-down. I'm having trouble with the window insert that doesn't fit easily in my slider window. What to do if your window and the insert aren't a perfect match, would have been a useful addition to this.
Exactly! People who make these portable ac units seem to cater to customers who have the windows that slide up and down. Mine are left to right sliding windows as well. Very frustrating.
I agree. . had to improvise using rubber sealing adhesive to fill in gap between window panel and window, and self adhesive mounting squares to make it stick to the window. (No foam insulation came with my portable ac unit). Used a window lock to hold window shut, however, it won't hold the window closed perfectly. . the whole setup doesn't work very well. Besides, what type of foam insulation would you buy for this unit?
I use the same AC unit in my travel trailer. Windows slide right to left. Simple resolution, instead of installing horizontally, turn the thing 90° and install it vertically. To block the window "closed", I simply got a 1"x 6" board, cut to length to fit. Holds it perfectly.
@@scootermom1791 I only use it to cool my bedroom, probably about 170 square feet. It does a fine job of that but I don't think it would cool anything more than 1 room.
I put rubber weather stripping on mine and put the whole thing on the outside of the window, then put wooden strips inside and drilled through the bracket into the wood from outside to make an airtight seal without damaging the window.
I have a portable AC unit. Its sitting on a little table,and my drain hose goes into a bucket. I have a large picher in the bucket that I empty everyday. Some apartments won't allow a window unit,but this is perfect.
Does anyone know if we can buy an additional window ventilation bracket so we can move the unit from room to room? We would like to lock in the vent plate & not have to re-install each time? We've looked at the provided parts but there's no information for spare vent plates. Thank you!
Purchased: August 2023 - still works GREAT!I ru-vid.comUgkxxsUnXhGsSJLim_XnMHyQK0u3XVaW-CGn live in a studio and during the summer it gets scorching hot - really old building with no ac units. I can’t express how EASY it was to install. This unit has been a life savior during the summer and some days during other seasons where it can still be a bit warm at night. In this small place is my friend, a husky, poodle mix and myself. We need AC - lolI don’t use the dehumidifier option - I’m not sure if it will leak in my house, since I did not install the small draining hose that came with it. May look into it late but I don’t worry about much humidity in the apartment. I don’t understand why the negative reviews since all things mentioned, I personally did not find issues with. Definitely worth it!
The main reason I'm watching this is to see what kind of plug. What do I need to do to adapt the 115 V to a 110 outlet? I'll watch to the end. Thanks very much for posting.
Nice video. However, is it just me or is there no explanation about the clear plastic hose that’s about 2 feet long and three-quarter inch diameter? He mentioned it when he unpacked the box but I don’t believe there is any explanation for its purpose. I’m sure it’s a drain, but I’m not sure if/when you would need to use it if only using the device for cooling air. My set up was rather difficult. I called the Frigidaire number and got some woman who kept telling me that the whole unit has to go up into the window! She never did understand that it’s a floor unit on wheels. At one point she actually told me I need to get new windows to be able to use the unit😆! Anyway, it’s up and running and works very well. Thanks for the video!
It sounded to me like the hose would be used to drain the unit for storage (for the off season)or he said you can roll the unit outside to drain it as well. That's probably what I'll do. I'm installing mine tomorrow.
I have a question can I leave my outer window screen on? I have older double sash Windows but the screen is separate on the outer edge of the window sill. Thanks.
I’m struggling over here that the hose vent will not stay in the window keeps popping off ( so annoying) . I believe the clips isn’t strong enough to hold onto the board & the ac ! I’m having second thoughts to returning it . Guys “ don’t “ drill holes in your vinyls windows!!! Smh It’s a nice ac unit but it all becomes complicated with remotes & the Ac that doesn’t match up. Dealing with 80 year old man trying to keep it simple for him .
Very helpful. However, there was not enough clearance from the sill of my window to the oval opening for the connector “cup” to snap in. (There is plenty of clearance for the window shown in the video.) I had to turn the slider assembly upside down (opening then on left, not right) and snap the connector “cup” into the oval opening essentially upside down from the standard installation. Since the drill holes no longer fit this reversed scenario, I used a heavy duty white tape to hold the slider in place. I hope this holds once the unit is turned on and begins to vibrate a bit. Otherwise, all seems good!
I am having an issue with my unit when I turn it on high it doesn't cool but when I put it on medium it works. But when I turn it on high I hear it kick the compressor on then it goes back to basic fan mode. I can't understand if this a voltage issue? Nothing else is plugged into the wall
I recently purchased a Frigidaire portable air conditioner that also functions as a heat pump. However, we will only be using it as an air conditioner. The instructions state that it’s not necessary to attach a condensation drain line when using it as an AC since it utilizes the condensed water to help cool the unit. In conditions of extreme humidity, what happens to the excess moisture when the unit reaches its capacity, if that's possible?
I have this exact one and I have a P1 code that keeps coming up. I’ve drained it cleaned the filter and still the same thing. I’ve seen what looks like dust or rust in the water that was drained. I’ve even vacuumed it out and still the same code. This is the second summer I’ve used it and didn’t have this issue last year.
If you want to use the dry mode, what’s the best way to attach the drain hose? Our window is higher then the unit hose location. I’ve never used one of these, so I have no idea how much water it’ll produce. We live in upstate NY.
Per the instructions on Dry Mode “ please be sure that the height of the drain and the section of the drain hose should not be higher than that of the drain outlet or the continuous drainage may not work properly” sounds like it may not work for your situation. I’ve seen some folks place the hose in a 5 gallon bucket instead of running it outside
It has a pump on the top drain output it will pump water at least 3 feet from the drain. However if in cool mode the water will flow out on the floor if the bottom drain isn't going into a pan or something.
It says on the instructions that as long as the window is less than 16 ft above the drain opening than it's fine. But let me say from experience to check to make sure it's draining at regular intervals.
Conveniently skipped the part showing how the tube spout connects to the window piece. Should be obvious but mine isn’t connecting. And in this video there’s a blurry fast forward effect that skips over this step.
On the end part of the hose that connects to the slider kit in the window, what are the two clamps on the edge used for or what are the supposed to clamp to?
He skipped the connecting the hose to the slider hole part. Still scratching my head on how to fit it on. It has a bump that goes either up or down, but I can’t get it to fit.
I connected mine with the screen on. Would that b a problem on cooling? It fits perfectly but, I wonder if any weird animal might get into the tube if it has no screen. Please help
First, the exhaust hose, the hose outlet, and hose inlet are 3 separate pieces and this video doesn't show how to put those pieces together - you skipped that part. The instructions are saying something about using screw to attach these 3 pieces. You totally skipped that part. I am not happy about needing to hire a handy-man to install this thing.
Do you have a rough figure for its coefficient of performance? This type is supposed to be less efficient than the inside/outside "split system", which I appreciate. Is three unrealistic?
I just bought a portable air conditioner. When Im not using it do I need to take off the hose from the window? I just don't want bugs going through the hose . Does anyone know ?
Yeah, I have the same question as Karl and Ben! What’s with the switch-up when the video fades out and back in while connecting the exhaust vent to the opening in the window?? The vent part that’s connecting to the window opening just went from a rectangle to a circular style. Which one is for real and why did you switch it up mid-video? My confidence about this unit just went down a few notches! It makes no sense! Feels like a car salesman’s tactic. Please explain. Other than that weird switch, it’s a good video. Thanks!
The fade out is because the connection isn't as easy as it looks, not REALLY difficult just a 3 on the 1-10 frustration scale. And, otherwise, it is easy peasy.
It's not switched out it's simply rotated 180 degrees (upside down) because of poor design. The clips aren't strong enough to hold it how he initially puts it on due to gravity. It'll stay in place but ya gotta fiddle with it a bit. May need some glue, a wedge or a screw depending on your setup.
@@MattKeller not at all easy to just clip in as shown, clearly why it fades out!!! One of the clips just broke off on me! I'm so irritated right now, the thing does not fit in either way......urghhhh
The method of attaching the hose to the window vent is completely absent from the manual. That's why I looked for a video. The clips do not seem to align and I'm concerned about breaking them. 😕
you completely skipped over the part where you connect the large tube to the window kit. mine doesn't snap on like it should, the whole reason I sought out this video and you fast forward over it. unbelievable.
I bought the Frigidaire 10,000 BTU Portable Air Conditioner with Remote Control (FHPC102AB1), unpacked it this morning and was all excited to install it. Two hours later I'm drenched in sweat, frustrated to the max, and really upset with this item. I don't have a hacksaw or power drill. Why would I? I find it very hard to believe that the average customer can install this thing without having a nervous breakdown and just giving up. The slide panel does not easily fit in my windows. Maybe I have some kind of unusual windows, but that wouldn't make any sense. I'm going to pack it up and send it back. Really disappointed.
Ok, can someone explain to me what the thin line tubing is meant for? I watched the video, but I'm a little confused on the main purpose for it. Am I extracting water or some type of fluid while running the AC?
The thin tubing is only needed if you have one of the units that has the heating functionality (in addition to cooling). Apparently you need to run the line out the window if you're running heat because you want to dispose of the water build-up. There's a special hole in the window kit just for that line. If you're only using it for cooling or if your unit doesn't have heating functionality, you don't need the thin tube. Mine came with a thicker-walled, flexible clear plastic tube... I don't actually know what that one is for. Maybe for draining it before storage?
This video does not get an A. I came here since I misplaced my manual and am having trouble inserting the end of the hose into the hole opening in the window. It's very disappointing at 12:46 where Mr. Hughes stops his video at that point since he must not have known how it snaps in. Then he resumes the video after the hose was inserted so the viewers missed how it was done!! It's too bad some people forget the purpose of the video is to help people out.
I bought this because my AC unit broke and it takes months to get parts to repair . My ADT sensors on the window are separated when this is installed therefore I have to remove the unit each night.
I need a video showing how to crack this bad boy open. The few that are this model have pre-opened it to "save time" but it's not so cut and dry. Should just have to remove screws and slide a panel but not this model. Year 4 and the compressor went bad the other day. I'd like to try fixing it before buying a new one 🤷🏻♂️
And that lock on the window, what if there is a fire or any emergency and you need to open the window and the drill I’m sure will not be around at that moment! I think of everything lol but sorry, won’t lock myself up like that either. Makes no sense. Maybe some tension rods for me instead.
Unless your room is located on the 2nd floor or higher, then you wouldn't need to worry, if it's located on ground level, expect the worse for intruders. I'm just assuming, that is.
Internally, all air conditioners build up water through condensation. You empty this collected water when you aren't going to use the unit anymore. DO NOT ATTEMPT TO POUR WANTER INTO YOUR DEVICE FOR ANY REASON.
