Тёмный

Installing a Radiant Barrier in the Attic | Alternative Method to Insulate the Attic 

Dr. Energy Saver Dealers
Подписаться 6 тыс.
Просмотров 2,5 млн
50% 1

www.drenergysaver.com | 1-888-225-6260
To insulate an attic the conventional way, you need to air seal it from the conditioned space, seal and insulate existing air ducts, and line the attic floor with blown-in insulation. All of this is to be done according to the U.S. Department of Energy's recommended R-Values for attic insulation in the region, which in Ohio is between R-49 and R-60. That method establishes the attic floor as thermal boundary of the building envelope.
The problem with this method is that the attic remains unconditioned, therefore temperatures change drastically as the seasons change. The attic is very cold when it is cold outside, and on hot summer days it can reach temperatures as high as 140 degrees! If you have uninsulated air ducts running through such a hostile environment, the air that you paid to heat and cool is loosing or gaining temperature as it passes through the attic and is released into the rest of your home.
An alternative way to insulate the attic, is to make the attic a part of the conditioned space in your home. That means making the attic as cool as possible during summertime and as warm as possible during wintertime.
To accomplish this, Dr. Energy Saver recommends the SuperAttic System. In this approach, a high R-Value, 4-inch thick, and foil lined rigid foam insulation board, called SilverGlo, is fastened to the underside of the roof, leaving the soffit and ridge vents unobstructed so that the roof can be vented.
The SilverGlo boards are then taped and sealed to prevent air leakage. This process establishes the underside of the roof as the thermal boundary of the house. The insulation will prevent heat conduction in or out of the attic. The radiant barrier on both sides of the SilverGlo will reflect heat back to the outside on hot days, and to the inside on cold days.
An attic insulated with the SuperAttic System has a temperature very similar to the temperature of the living areas of your home. You can use it for storage, and the air ducts in the attic are now running through a conditioned space which conserves temperature. As a result, your home will be much easier to cool and heat.
To learn more about the SuperAttic System or to schedule your free attic evaluation anywhere in the country, visit our website or give us a call!

Хобби

Опубликовано:

 

13 июн 2012

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 856   
@brianbirc
@brianbirc 8 лет назад
Some of those attics look huge. That this silver barrier looks $$$
@sb9e
@sb9e 10 месяцев назад
I live in a story and a half, so our central air does not cool the upstairs. ru-vid.comUgkxxsUnXhGsSJLim_XnMHyQK0u3XVaW-CGn I ordered two of these units because our upstairs is so long with tandem rooms. I just got these three days ago and hooked them up today. These are so much easier than trying to insert window air and needing a frame for them. The Black and Decker are made really nice (actually better quality than I had expected) , they were easy to install. I only had to cut a few inches off the end of window insertion. They are not as quiet as central air , but they cooled down the room really fast and I am very happy with them. The only downfall I would say , is they will require a little more space. Our rooms are quite large, so it was no problem. I would recommend these units to anyone.
@22bungalow
@22bungalow 2 года назад
Hi great video and interesting idea. I think the advantage of this over closed or open cell directly against the roof deck is the ventilation cavity which prevents any roof rot which may occur between the deck and the spray foam. With XPS, EPS, GPS etc you're really only getting R4 to 5 an inch so at best that 4" panel is giving you R20 which is way below code in most places (usually R48 or higher). While the space is definitely more moderate than before it's probably not a bad idea to retain the existing insulation above the ceiling too. The video doesn't mention whether the space should be conditioned as well, i.e. cracking a supply or return into that space to manage humidity.
@TheWillingCoyote
@TheWillingCoyote 4 года назад
Twenty five years ago I put Reflectix (rolls of bubble wrap with foil on each side) in my former condo trussed roof. You staple its strengthened edges to the lower inside edges of the roof joists. The rolls are about 28" by 25', therefore easy to transport into attic. They were inexpensive, and you can finish in half a day. It made it so you could stay up in the attic mid-summer indefinitely. Before, you couldn't last ten minutes. I did help the lower living space in summer and winter, especially since both bedrooms had cathedral ceilings. The soffit and ridge vent should stay clear.
@sedas99
@sedas99 11 месяцев назад
Sorry was it asphalt shingles what about longevity of the shingles would.you say as usual better or not ? Thanks
@brad2548
@brad2548 7 месяцев назад
Hows the plywood decking and moisture level up there now? Is it still in good condition?
@TheWillingCoyote
@TheWillingCoyote 7 месяцев назад
Leave a 6" air gap on the bottom and top of each strip, stapling the Reflectix to the bottom edges of the 2x12s. This provide ample air flow, with soffit and ridge venting within inches of the ends. @@brad2548
@kungfoochicken08
@kungfoochicken08 Месяц назад
@@brad2548You shouldn’t have any trouble with it. You’re still getting your venting behind the foil. It’s stapled to the trusses, so there’s a channel of air for venting.
@manuelortegon5020
@manuelortegon5020 6 лет назад
I sprayed the under side of my roof and the inside of the concrete block walls with silver paint. I insulated the rest of the house with the best rated conventional insulation and it was cost effective with excellent results.
@giovannisocci8793
@giovannisocci8793 4 года назад
WOW😲 This looks fantastic...an attic that looks neat and organized,ducts look clean...it looks beautiful.
@marugg78
@marugg78 4 года назад
I gotta move to the Greater Cleveland area to get this? Damn, there's always a catch.
@fiskfarm
@fiskfarm 4 года назад
If you can't afford 4" go with 1" foil covered on one side. I pay $8 for a 4 x 8 around here on the after market. Makes a huge difference and you loose less head room in a shallow attic. Stored items will no longer cook or freeze like before.
@Guillotines_For_Globalists
@Guillotines_For_Globalists 5 лет назад
I have never seen an attic insulator ever go through any of the extra trouble to seal the ceiling, light fixtures, and any conduit or plumbing penetrations into the attic. They just install a baffle here or there and blow it in and they're done with it. Even the best of the best for contractors!
@DAS-Videos
@DAS-Videos 6 лет назад
Makes sense. My problem would be I couldn't find leaks in the roof very fast or locate them easily.
@quabledistocficklepo3597
@quabledistocficklepo3597 5 лет назад
Dasdfjkl, Yeah, that could be a problem, you killjoy.
@ScottHz
@ScottHz 4 года назад
Marvelous Wonderful the venting should prevent mold growth by drying the roof out, but if a big leaks run down those foam boards and soaks the top plate...?
@chrisgraham2904
@chrisgraham2904 3 года назад
Also represents some challenges to vent any future ducting, like bathroom fans or range hoods through the roof.
@derek400004
@derek400004 3 года назад
you'd have the same problem with a completely foam-filled ceiling too
@liberalman7745
@liberalman7745 2 года назад
This system works well up to point there is zero air leakage from attics to roof. In wintertime, If there is any seam that the moist, warm air can leak from conditioned attic to the roofing, it can condensate on rafters and sheathing faster and more severe than conventional system because in conventional system, if there is any leakage from ceiling to unconditioned attic, there are still enough room for moist air before condensation forms and with reasonable attic venting, you will be fine. This system is like cathedral or flat roof that are more susceptible to condensation
@adamcturnbull
@adamcturnbull 6 лет назад
I agree that the rafters need to be vented but pictured here is excessive. I have a shed style roof I just built and its only 8" deep and the insulation is 4" with a 4" gap to vent. My eaves are open and the building is wonderful all year. Zero issues. I am in a mild climate which means its rarely freezing in the winter BUT its nasty hot in the summer but its as if the house was under trees its so cool. A roof doesnt require massive gaps to vent as shown here. A few inches will do it.
@joe7665
@joe7665 7 лет назад
good luck getting this in your attics, this must be for mansions not the smaller homes cuz you will have to cut these into super small pieces in order to get this system in most attics. i wanna see the cost of these sheets and labor to install vs the cost savings compared to more modern blown in systems
@quabledistocficklepo3597
@quabledistocficklepo3597 5 лет назад
True, but I've been planning to install an entrance to that area through the ceiling of one of my closets.. There is no way I can get up there now.
@inquisitvem6723
@inquisitvem6723 5 лет назад
is it true that radiant barriers decrease the life of your roof?
@heidis8713
@heidis8713 5 лет назад
@@inquisitvem6723 No. But don't do anything to the outside of your roof. Don't seal with clear coat or paint with reflective, etc...
@heidis8713
@heidis8713 5 лет назад
Assuming you are in a very hot climate, the savings will be huge.
@inquisitvem6723
@inquisitvem6723 5 лет назад
yes, i live in houston, texas. it is hot and humid here for like 8-9 months out of the year!
@stevehenry7914
@stevehenry7914 8 лет назад
There's a misconception about the attic space and it's conditioning. Unless you add vents to blow hot or cold air into the attic, then that space is not "conditioned" by this method of insulation. I'd leave whatever insulation is on top or your ceiling in place even if I chose their method. Energy is wasted in a home in the summer by three ways, convection (hot air from outside gets in via doors, windows, leaks at electrical plugs on outer walls, etc...), conduction (hot air outside on walls or in the attic creates a driving force of heat transfer into the colder room inside, insulation just slows that heat transfer rate down), and radiation from the sun (black or darker objects like roofs absorb and let the radiation pass through while shiny objects like aluminum reflect it). This product addresses all the heat transfer problems really well but probably is way too expensive to have a good payout. Don't know what the R-value of the foamboard is. Also, some people mentioned roof venting and the answer is you leave it alone or add more if the soffitt to roof venting is inadequate.
@davidjessee7701
@davidjessee7701 6 лет назад
Steve Henry I think they add a vent and a return
@pierredemare609
@pierredemare609 5 лет назад
Good points, but dont you think that conduction and convection effects are (or can be) cancelled out or mitigated? Radiation is taken care of by the foil (and to some degree metal roof (light colours, especially). While it is true that it costs more to put the insulation in the slopes, it gives you added space and it is much easier to control and fix issues if there are leaks (air or water). One other way of insulating is using spray foam (hard), but it is expensive. Why isn't styrofoam not used as insulation? In my area, I only have the spray or fiber glass option.
@jennykarr8191
@jennykarr8191 5 лет назад
Some 1 John i
@stephenverchinski409
@stephenverchinski409 4 года назад
Folks are looking at long range survival w/o gas or electric heating. Homes with R 100 Ceilings and R 50 walls.
@tonymanero5544
@tonymanero5544 2 года назад
This video doesn’t make sense to me in that are large penetrations via the existing soffits running along the eaves. These guys are saying spend $thousands on foam boards and labor installation to slow down the entry of outside hot or cold air into the attic. I suppose the foam boards stops convection transfer of heat or cold via the roof, but I would just make sure the attic has as much R value insulation as possible, like 38 on horizontal surfaces and at least 19 on knee walls and vertical surfaces. I also have a ridge vent fir the full length of the roof peak. These guys just don’t make sense to me.
@digit4455
@digit4455 7 лет назад
Wouldn't the foam panels get a better seal if the panel edges were shiplap joints or the foam was installed in two staggered layers?
@adamlawrence8736
@adamlawrence8736 19 дней назад
Yes
@timmismith988
@timmismith988 6 лет назад
Soooooo when you coming to Florida, cuz every home here needs this!
@yonihales9133
@yonihales9133 6 лет назад
I hear if your attic contains your duct work, if it gets extremely cold your ducks may quack ?
@KarenVidal7
@KarenVidal7 5 лет назад
John Hales 😆
@GARRY3754
@GARRY3754 3 года назад
As long as you do not eat the ducts it is ok.
@chrisgraham2904
@chrisgraham2904 3 года назад
I only raise turkeys in my attic. No ducks. If your ducks are quacking...apply more duck tape to their beaks.
@Cuernavacachica02
@Cuernavacachica02 2 года назад
🤣🤣🤣🤣🤣🤣🤣🤣🤣
@fireboltaz
@fireboltaz Год назад
Punch yourself
@ralphfurley404
@ralphfurley404 5 лет назад
Like the idea of boxing the rafters from soffit to ridge vent convection would probably be faster as the roof heats up
@quabledistocficklepo3597
@quabledistocficklepo3597 5 лет назад
This looks like the most expensive method you could use. If you're trying to REDUCE the heat in that space, I think you could use foam spray, aluminum foil, thin reflecting batts, etc. I'll bet that even spraying the underside of the roof with aluminum paint would help.Hmm, I think I'll do an experiment to check on that.
@MAGAMAN
@MAGAMAN 10 месяцев назад
Expensive? You know how expensive spray foam is?
@sebastiaanl9876
@sebastiaanl9876 7 месяцев назад
Lol it’s not paint it’s a vapour barrier …
@georgespangler1517
@georgespangler1517 5 лет назад
Great approach,, for the good old school built homes,,that I as a contactor always built,,, but the new half ass builder's are convincing people to use truss,, with no benefits at all where you don't need to span over 24 feet,,,a good honest contractor would tell you that first hand,,and that you won't have any storage space at all when he's done,,saving himself on labor and maternal...
@leebrewer1190
@leebrewer1190 8 лет назад
I don;t know how valid my thoughts are with other effects of this system. I would be concerned the smaller air space below the shingles would make them hotter on the underside and not last as long. The radiant barrier not only reflects the heat back to the roof, but traps the shingles in between a hot UV input from the sun, and a closer, hot radiation of heat on their backside. So the expense of installing Silver Glow, and a shortened shingle life (very expensive) could make for a lot of excess money put out.
@Meekerextreme
@Meekerextreme 8 лет назад
+Lee Brewer I was thinking the same thing.
@cameriqueTV
@cameriqueTV 8 лет назад
Why don't they just show a temperature test in that rafter space, both with their product, and without.
@Meekerextreme
@Meekerextreme 8 лет назад
cameriqueTV I'm sure it reduces it
@ForestToFarm
@ForestToFarm 2 месяца назад
You could look at it this way. If no foam board is installed to the rafters sure there is overall air flow. However there could be lots of stagnate areas that it’s not flowing as much as it should. If the foam board is installed then each and every rafter void will have equal air flow. Just my thoughts.
@piratecat4519
@piratecat4519 5 лет назад
Looks like the makings of a grow room.
@lawrencemyoder3173
@lawrencemyoder3173 6 лет назад
I have a standing seam galvanized steel roof, which has lasted 98 years already. It was not constructed to ventilate. It is virtually a sealed roof. The original insulation was under the attic floor--about two or three inches of wool between the attic floor joist with floor boards covering virtually the whole attic floor. Decades ago someone installed fiberglass batting between the rafters, but the distance between the rafters varies. That together with the increasing brittleness of the backing paper of that fiberglass batting has caused it to fall out in strips. Over the years people have tried to staple it back up, with marginal success. I have removed all of that batting between the rafters. I am closing the eves with inch thick styrofoam board. My plan is to hire someone to spray a couple of inches of closed-cell polyurethane foam on the underside of the roof--between the rafters directly on the roofing lathe and the bottom side of the standing seam roofing that is visible between the pieces of lathe. How many inches of closed cell urethane spray should I have applied? I am thinking about spraying open cell foam insulation over (on the underside of) the closed sell foam. What comments do you have about this approach to improving the insulation of my house roof.
@byronlaw6724
@byronlaw6724 3 года назад
I could see where this could be useful when designing new construction, but 1) it would be a nightmare with truss built homes and 2) the roof better be built to superior standards to ensure no leaks.
@davemoxon8523
@davemoxon8523 2 года назад
Love this idea I was looking at spray foam but this is a do it yourself project
@Kennykoo65
@Kennykoo65 6 лет назад
Absolutely no discussion of cost vs benefit. This is simply and purely an ad.
@fjkong9924
@fjkong9924 4 года назад
As a construction worker i can tell you this is not gonna be cheap. This type of insulations in australia usually cost around $40/sqm compare to $8/sqm of normal R3.0 ceiling insulation
@fjkong9924
@fjkong9924 4 года назад
And you are looking at 10times more in labour cost.
@enkrypt3d
@enkrypt3d 4 года назад
you can save up to 20% on your energy bills with radiant barrier film... this is without the foam board...
@MarcGyverIt
@MarcGyverIt 4 года назад
Who cares about cost, how does it FEEL? That's the number one most important reason to insulate things, otherwise nobody would bother heating and cooling at all.
@justthink5854
@justthink5854 4 года назад
@@MarcGyverIt "i FEEL your pain" lol. of course $$$$$$$$ matters.
@kyleburgess1539
@kyleburgess1539 6 лет назад
Is there an advantage to this silver glow stuff over regular rigid foam board insulation panels? I have to imagine it would be cheaper to buy a bunch of the panels at home depot and do this myself. Thoughts?
@p3063061
@p3063061 11 лет назад
DrEnergySaver Cleveland. can i seal my attic like you did in this video with 3/4 inch foam board or 3/4 R-matte plus 3 R3.2 that is sold at home depot. if so, would i have to make a box in the raffters so that my attic fans and pull the heat out in the summer. i live in deep deep south texas were the days are 105 and the nights are in the mid 90. and winter time it doesnt get to cold, heck i went to the beech on christmas day. thank you -mike
@greggbarber
@greggbarber 7 лет назад
In Cleveland that attic could double as a place to cool off after the Browns lose !
5 лет назад
OHHHHHHHHHH!!!
@soleornelas6758
@soleornelas6758 4 года назад
Door how do called door thing called like look to tim3sorderupper ladder echo in fade the sun cook the watering the looked to wasdiana reyes
@soleornelas6758
@soleornelas6758 4 года назад
mkoi,g pencil to clean jog earaserin bshower outsidespill what is in paint barroom in in water fossil in from the what in the turn rise water bubble cleanse to wash
@chief5981
@chief5981 4 года назад
Sole Ornelas please stop
@stephenodell4280
@stephenodell4280 5 лет назад
In Australia they insulate both under the rafters and between the ceiling joist so their homes are twice the insulation.
@JCraftvfx
@JCraftvfx 4 года назад
How exactly would you get a huge chunk of that foam with the radiant barrier up through your attic doorway? Cut it up into many small pieces?
@pastorjohnculbertson661
@pastorjohnculbertson661 4 года назад
I've been doing this for 15 years with duct board. I offer this when selling a new heating and cooling system.
@nofurtherwest3474
@nofurtherwest3474 4 месяца назад
Quest - can the duct board be painted? And to get a finished look can drywall be installed over it?
@venessariley3285
@venessariley3285 Год назад
thank you for this video! Attic insulation seemed hectic and I let the professionals at Pure Eco Inc handle it
@bobwilliams572
@bobwilliams572 10 лет назад
These panels look impressive and very effective : )
@bobwilliams572
@bobwilliams572 10 лет назад
You can Lap cut them to make it better.
@kchilz32
@kchilz32 4 года назад
And very expensive
@lindabohannon6441
@lindabohannon6441 7 лет назад
wow a lot of complainers....well let me see if i can help. We had a new roof put on last year... Cool Roof tiles with this Radiant Barrier. We did research on how BAD insulation blown in can cause health concerns and I did not want any of that. Lets not even mention the fire risks. This was done in less than a week -with a whole roof replaced... and it looks AWESOME! Even in our Garage. Our Electric bill in the summer was pretty even -no spikes. And so far this COLD Winter, we are saving a little... not as much i admit. But inside temperature is much more comfortable at a lower level. Were also using a portable heater on an enclosed patio, so that would probably acct for the pricing... anyhow we are thankful to Kern Golden Roofing in Kern County for doing a great job. Only mishap i would say is ''keep tarps over anything in the garage''. The removers laid tarps but they then took them off, when it came time to put roof back on-well left a bit of a mess. Very happy with this option. Highly recommend.
@lindabohannon6441
@lindabohannon6441 7 лет назад
And they checked the level of the current insulation, did not remove so i don't know why anyone would say there's no insulation over the ceiling. With the radiant ceiling you don't have to meet any requirement level, but i had them chk over the current to be sure there wasn't any needing patched. We still get mice in there sadly in winter...trying to find where they are getting in... through the garage we believe.
@danielmeyers5598
@danielmeyers5598 7 лет назад
a sealed in heated mice excrement experiment. THATS gotta be good for health. ;-/
@lindabohannon6441
@lindabohannon6441 7 лет назад
They only come on winter- but i definitely agree its not good~ they seem to stick to over my room area to drive me nuts- but then like right now they arent in there so i dont know if the dog got them when they come out. It really sounds bigger then a mouse or rat even. Again don't know how something would get in
@michaelwizouski7317
@michaelwizouski7317 6 лет назад
I'm just going to make a box out of this and live in it.
@michaelwizouski7317
@michaelwizouski7317 6 лет назад
ROB NATION wow cool stuff, never heard of it!
@dewuknowHIM
@dewuknowHIM 5 лет назад
Lol !!!!
@BrilliantDesignOnline
@BrilliantDesignOnline 5 лет назад
SIP panels rule for new construction.
@lukereinhart5387
@lukereinhart5387 5 лет назад
You're hilarious
@rogerc.roberts4705
@rogerc.roberts4705 4 года назад
Basically you are suggesting to adopt the You Tube videos covering building shelters for feral cats to building insulated boxes for humans to live in....? Lol!
@ComdrStew
@ComdrStew 3 года назад
My cousins walls are made out of this stuff. His outside walls are 6 inches thick. They sandwich these between wood frames with OSB board covering both sides. They put brick on the outside and drywall inside over the OSB board. Never have to find a stud, since the whole wall is a board.
@onecrazywheel
@onecrazywheel 6 лет назад
This product would have to be installed in new construction format. To be retrofitted through most houses after the fact with attic access openings of 2'x4' or like our 16"x20" opening could not happen. Unless it was cut up beyond repair.
@42lookc
@42lookc 7 лет назад
Where can you buy Silverglo for DIY installation?
@sweetiepienumber1
@sweetiepienumber1 10 лет назад
Thanks for the excellent product demo, I like the idea. *What do you recommend for a 46' L X 32 W 15.5' high P-style quonset-hut?* Love the 4" and I suppose the R-Value is variable but *what are the parameters for the R-Value?* Contractor wants $6,500 for spray foam, but I think it might get cooked in the summer here just north of Phoenix, AZ where it is insanely hot for half the year or more. And I'm not sure it's the best bang for the buck. I think the contractors are making out like bandits, I would too if I could I suppose. Your 4" product appears something like an attic foam "beverage" cooler. T&G might be nice and/or a "quality" lasting seam tape that peels off instead at the edges as opposed to the use of sealant for every joint. Clearly sealant will be needed when material is custom cut and maybe there are so many variables in attic design that one is going to cut a lot anyway? I foresee all sorts of versions of this material in terms of water and fire resistance in the future and more durable or even finished surfaces. However, those products might already exist and can even be used in exterior/interior building materials if I recall. I think there is even load bearing interlocking foam with more rigid materials on the front and back which is used in other countries (maybe here) for fast emergency and/or cheap buildings. Pardon me as I am shooting from the hip. It's been a while; disabled remodeling contractor, roofer, and home inspector (previous franchisee of a major national inspection corporation -- too expensive these days!)... Now I'm more of a interested bystander, but I know how to search the net :) Thanks!
@jesushuerta1852
@jesushuerta1852 6 лет назад
Id like to see them do this video in my 1200 square foot home attic.
@woodrowwilliams1812
@woodrowwilliams1812 5 лет назад
If you have a TV antenna in the attic this will render it useless. The foil blocks the signal. Also, if you have a very tall roof it would require ladders to install it in the upper parts of the roof deck and a LOT of material would be needed. I guess you could build a second ceiling in the attic so as to not need to go all the way up to the existing roof deck.
@DennisMathias
@DennisMathias 4 года назад
What's a TV antenna..?
@PlanetIscandar
@PlanetIscandar 2 года назад
*Woodrow Williams* Blocking electromagnetic waves would be amazing, but unfortunately we are also turning the whole Attic into an (energeticaly) toxic "Reich-Accumulator", due to the combination of Aluminium foil and the synthetic material. If we can avoid the alu-foil and put fiberglass or similar material, then it would be a great idea. The biggest problem however is the alu foil.
@jamesphillips7283
@jamesphillips7283 Год назад
But would help out if emp went off
@MAGAMAN
@MAGAMAN 10 месяцев назад
@@DennisMathias It's like a record player or an 8 track tape player. Hell, I guess a normal cassette player falls into this category too (I feel old).
@MrsMika
@MrsMika 9 лет назад
Dr. Energy Saver could you please put together a video on how to obtain an R80 roof? I have been reading about passive solar homes and that they should have an R80 roof but have not found how to achieve such a roof. Your help would be greatly appreciated!
@TripSmith
@TripSmith 10 лет назад
Why would this method be preferred over spraying foam between the rafters? Wouldn't it be cheaper that way and you would achieve the same thing?
@BourneAccident
@BourneAccident 9 лет назад
The code allows spray foam directly applied to the roof sheathing in many states, however many people say that spray foam does not allow the sheathing to breathe and cool in the summer. They also say the excessive heat can cause damage to the sheathing and shorten the life of the asphault shingles. I am a retired contractor and I think the jury is still out on this one.
@TripSmith
@TripSmith 9 лет назад
I'm with you Bourne, I think it is undetermined how it truly effects things. Contractor myself and I just figured this was going to extremely expensive.
@BourneAccident
@BourneAccident 9 лет назад
SailingandSuch Yep, the jury is still out. And what was it you were saying that was going to be extremely expensive?
@TripSmith
@TripSmith 9 лет назад
To install those thick foam panels in an attic. No telling what one of those things cost. Also, in my area we have 50/50 stick built and truss roof systems so they would only work on half the houses. I would think it would be major pain to get these around and have them fit tight and seal tightly in your typical attic vs the nice open display they have with no bracing in the way.
@BourneAccident
@BourneAccident 9 лет назад
SailingandSuch In my attic, I was considering doubling up on that 2" Dow foam board and sealing it with expanding foam. It's gotta be cheaper than the stuff in this video.
@MilesRoseProductions
@MilesRoseProductions 4 года назад
What if I want to put a bedroom in the attic, how would i put drywall over that insulation?
@77gravity
@77gravity 6 лет назад
They point at all the issues with sealing the attic floor, and sealing the attic roof instead is logical, but they then conflate this with their product, as if all the issues with sealing the attic floor (pipes, wiring, a/c ducts) are also a problem with the attic roof - which they are not. It looks like a great product, and would be ideal for a new build or renovation, but to back-install this in many homes would be slow = expensive, compared to spraying, etc.
@kzippy1
@kzippy1 4 года назад
So if its reflecting all that heat back on out to the roof, what is the long term effect on the shingle? unless you have a metal roof, youre looking at increasing the deterioration rate. Maybe not significantly but it seems it would have some effect.
@karmendimas5274
@karmendimas5274 2 года назад
that is why you use the CORRECT shingle type!
@hannecatton2179
@hannecatton2179 5 лет назад
This method is known as ´a warm roof´ in the U.K. Used mostly in new build.
@patrickholcomb9628
@patrickholcomb9628 7 лет назад
how does this product work with high wind? such as hurricane force winds to help pockets of trapped attic space air in the inner joist/beam spaces not collect depressurizing, and subsequently re-pressurization from not ripping the roof off with the limited air flow moving through the eaves vents and the ridge vent via joist or whatever now created by the sealed space?
@ze_german2921
@ze_german2921 6 лет назад
What about when you have a Bounus Room and want to sheetrock the Area and use it as a Living Space?
@angryoharas
@angryoharas 9 лет назад
Any idea on cost per SF?
@marc.wrutgers6704
@marc.wrutgers6704 7 лет назад
In the Netherlands and the rest of Europe the Roof panels are insulated so need to do it after the job is done .
@JohnOsCreations
@JohnOsCreations 6 лет назад
That is so untrue. Many buildings in Europe do not have insulated roof panels. Only newer homes use that construction method.
@cbradley857
@cbradley857 5 лет назад
A silver glow is what the salesman or saleswoman gets after they sell you this stuff. Lol
@ethanbrunink1977
@ethanbrunink1977 5 лет назад
What's the cost difference from putting closed cell on the decking? I feel like the biggest benefit would be to easily remove it if needed and re-install.
@argelioolivares631
@argelioolivares631 Год назад
I think this will be better on the long run it's more of a hybrid approach you got a venter roof but a condition attic
@kitisabuebos
@kitisabuebos 11 лет назад
Wow, I love what I learned from this video, :) I'm gonna do this to attic by my self
@ricpratt6584
@ricpratt6584 6 лет назад
So if (when) you get a roof leak, where does the rain water go and how could you possibly trace the point of the leak with the roof totally sealed off?
@kc1776
@kc1776 6 лет назад
What about condensation in humid climates like Florida? Can this age your roof or adversely effect it if installed improperly?
@jubankta1627
@jubankta1627 4 года назад
Hi sweety
@therealsparkman
@therealsparkman 5 лет назад
Depending on building codes, you would not be able to remove the ceiling insulation to add this type of radiant barrier. Required in my climate, vapour barrier, insulation. No exceptions! Unless you had blown in foam insulation in the ceiling, of course. Those sheets of foam insulation at 4" thick are about R-20 (2" = R-10). A sheet of 2" 4' X 8' sheet Dow polystyrene foam board is around $40 dollars. Can't imagine what the cost of this product would be, but it wouldn't be cheap. The minimum R-value ceiling by code in my territory is R-50. Good idea, though, if you live in the southern states.
@argelioolivares631
@argelioolivares631 Год назад
There in Ohio?
@barb1283
@barb1283 9 лет назад
My question, is what if roof develops a leak? How would you know? I'm concerned leak could go on and on and ruin roof without you knowing about it. Now if roof leaks, we see it come through to top of ceiling of room below and so can fix it right away.
@hakt100
@hakt100 9 лет назад
barb1283 You're spot on, with a leak. With this system, the homeowner would never know their shingles/roof is leaking, until the leak stained the walls in the house, if it ever would (depends where the water decided to run down). But that isn't the installer's (of this foam board) problem. They don't have to look at the future problems, like leaks, like baking the shingles due to excessive heat build-up of the roof itself. All they look at, is the $$$ for the installation of the foam.
@mikhailkurylenak1515
@mikhailkurylenak1515 9 лет назад
Dan Inms Yeah, so according to you it is better not insulate house at all JUST IN CASE when MAYBE some 10 years from now your roof will develop a leak you will be able to spot it. And until then, put POS fiberglass batts and spend a fortune trying to heat and cool you house??? Wow dude, you are a genius.
@Richard-md3gi
@Richard-md3gi 7 лет назад
barb1283 if it did leak, it would hit the barrier, and run out of the soffit, outside of the home instead of through the ceiking above your new tv or newborn crib.
@augustreil
@augustreil 6 лет назад
Barb, You're correct. Tool Guy, you're a Major Tool.
@sebastiaanl9876
@sebastiaanl9876 7 месяцев назад
Any isolated roof need a vapour barrier, so how could you even detect a leak?
@freewoodencrosses
@freewoodencrosses 9 лет назад
2 things you don't mention. 1 is that my attic is not so perfect like your example. My joists on the side do not go smoothly to the ridge vents Cross joists would stop the flow of air, so something would have to be done to allow the venting to continue. Also my attic has a place that is not even accessible because it is so close to the roof. 2nd my gas furnace is in the attic , I suppose there is enough air to support combustion , TRUE? Great video and I think this is the future of attic insulation Thanks in advance Dennis... After A year , no answer... Where are the salesmen now? 09/15/2018 , still no answer from these guys. I give up on them
@augustreil
@augustreil 6 лет назад
Raping other people that don't know any better I would guess !
@Guillotines_For_Globalists
@Guillotines_For_Globalists 5 лет назад
What efficiency is your furnace? If it is above 80% they should be able to duct an air intake to the exterior of your attic, along with the exhaust. They commonly do this with basement furnaces as well, although it is possible to have the room provide the air for proper combustion as well.
@barbbusch2983
@barbbusch2983 7 лет назад
I would like to know more about this product and how to get it please
@robertgonzalez8419
@robertgonzalez8419 4 года назад
I would like to know where I can get those Silver glow panels.
@brad2548
@brad2548 7 месяцев назад
How is the use of this going to effect the wood trusses,Alex ventilation and plywood decking in the long run ? Does this create ice bridges from one bird block o the other ? Should each birdblock/truss tail ends be individually vented with the traditional ventilation holes in each bay ?
@jeffrutan8521
@jeffrutan8521 5 лет назад
This is over kill. The savings will never offset the installation cost
@MrKen-wy5dk
@MrKen-wy5dk 5 лет назад
If you do it yourself, yes it will. -From personal experience.
@soleornelas6758
@soleornelas6758 4 года назад
Loweriderin blue car turn on like the key machine that out side trukeris the turn blue in the garages
@scind2585
@scind2585 10 месяцев назад
How do you cover the hip roof section to keep ventilation up the rafters? Do you have to add spacer wood?
@larryjanesky8185
@larryjanesky8185 10 лет назад
You don't need to vent an attic - you need to vent a roof. this system does that. It's excellent. And it cost zero to "heat" the attic because it's heat that leaked through the ceiling anyway, and then it stops there. Its adds no load on the heating system. The reason to insulate the roof deck instead of the floor is that the ducts are now in conditioned space - very important benefit. Further you don't need to seal around chimneys, can lights, tops of walls and framing assemblies, etc, etc.
@julesmarsh1
@julesmarsh1 10 лет назад
Actually, you don't need to vent either one. The unvented roof assembly is perfectly code acceptable. Bringing it the foam down to the bottom of the rafter eliminates thermal bridging and improves the insulation performance. If you didnt want to install the soffit venting, you can fit the foam between the rafters and be just fine.
@TanTan-ni4mg
@TanTan-ni4mg 7 лет назад
this is something that should be Done while the home or building is being built or remodeled. no good will come from throwing this stuff in the attic of a 1940's mill house with no wall insulation. this is a performance product NOT A FIX ALL to energy conservation. also the 30% youre saving " might go out the window" if the entire building envelope isnt made to work with this system.
@jeffreycooke8743
@jeffreycooke8743 7 лет назад
A great majority of homes are built with trusses so I can't see this as a fix all.
@nathandeneault5778
@nathandeneault5778 7 лет назад
the loss of heat will be straight up before out the windows. You can have leaking windows, and get insulation in the attic and you will be doing better than the opposite, replacing windows instead of the insulation. Remember heat rises.
@BPCADownStateChapter
@BPCADownStateChapter 6 лет назад
Yes, this solution would require alot more labor to work with trusses. However, Only About 10% of existing homes have trusses, and about 50% of new homes built in the last 10 years have trusses. In theory (far from reality) newer homes shouldn't need a retrofit of insulation since they should be built to meet modern building codes requiring proper thick insulation. - I know this after 12 years as a building inspector and an insulation contractor. I converting my own attic into this format, known as a "hot roof" attic 10 years ago with spray foam insulation with excellent results. Spray foam is a less expensive and better solution for truss roofs but Spray foam MUST BE INSTALLED CORRECTLY to be safe and work properly.
@jasonmcfarland3696
@jasonmcfarland3696 6 лет назад
Would this be efficient if used as both insulation and baffles between rafters on cathedral ceilings
@KarenVidal7
@KarenVidal7 4 года назад
I would like to get this done but I don’t have any ventilation system just windows and soffits. Can I still do this without causing any condensation damage?
@LubaLuba1
@LubaLuba1 4 года назад
But would you get condensation on the side exposed in the attic and can mice still barrel thru the new insulation?
@ibealion1
@ibealion1 3 года назад
You would not get condensation if you have the right venting.
@RSchannel777
@RSchannel777 6 лет назад
What's the diff between all the time sawing / installing this, and just stapling the radiant barrier fabric?
@percyfaith11
@percyfaith11 2 года назад
Greater R value
@Feedback4Utoday
@Feedback4Utoday 5 лет назад
Looks great. Do Wonder if the insulation would get overwhelmed after say 5!hrs of sun on the roof - & then be same temp as the roof? Does it still work?
@MShrader211
@MShrader211 5 лет назад
Hot air rises quickly, so if you think about it they have just created a lot of air tunnels that will circulate air (even faster I would think than an open rafter attic) from the cooler eaves (which are getting fresh air from outside the house) up thru each tunnel to the vented ridge line at the top of the roof. If I'm understanding their idea correctly at any rate. So you'll have a constant circulation between rafters drawing cooler air in at the bottom and expelling hot air at the top. And the attic space should therefore be cooler in the summertime. In the winter time, heat from the living spaces below the attic will migrate into the attic and be trapped in there keeping it warmer in the wintertime. AND, you won't have an attic space full of accumulated dust and pollen from air coming in from outside as per traditional attics (trust me, that dust and pollen in an attic suxs when you have to go up there for any reason at all!). Why everybody keeps bitching about not being able to find roof leaks I have no idea, it's not like these same people go up into their attic every time it rains to see if there are any leaks... they're unlikely to notice a leak until the ceiling caves in in fact! With this design any leaks will be channeled down into the eaves of the roof and you will see dripping water on the underside of your eaves (instead of ceiling collapsing!) and then you'll know you have a leaking roof. If a good roofer can't locate the leak from the topside of your roof, then you just have to remove the foam board from the area of the attic directly above where the eaves are leaking and spray water on top of the roof until you can spy the leak from inside the attic (or wait till a rainstorm comes and slip into your attic and look then). At least you don't have soaking wet insulation collapsing the ceiling sheetrock this way! Trust me, I've been thru it it suxs makes a hell of a mess! I don't see any downside to this other than cost and difficulty in retro-fitting an existing attic.
@timcornia1023
@timcornia1023 8 лет назад
By going with this method, you are turning the area into conditioned air space correct? I have a 2800 sq foot home (1400 ft basement, 1400 ft 1st floor). By doing what you have suggested, am I not adding an additional 1400 sq ft of space I am paying to condition (cool and heat)? If I only want to pay for space I use, wouldnt I insulate the ceiling and not the roof, as you have demonstrated?
@Steve-og3cr
@Steve-og3cr 8 лет назад
it's not actually "conditioned" as they are saying... but it will (should) greatly reduce the impact of the drastic temps in the attic on your HVAC and house.
@SAWimp1
@SAWimp1 8 лет назад
+Tim Cornia If your HVAC equipment is located in the attic, then you are already paying to condition that space whether you like it or not. Even the best hvac contractor following best practices and manufacturers installation guidelines will experience 30% leakage in their ductwork, and that will increase with use over time. In high performance homes, it is common practice to bring hvac equipment inside the homes thermal envelope. This increases the efficiency and life span of the system, and does not require insulated ducting.
@timcornia1023
@timcornia1023 8 лет назад
Good point!
@augustreil
@augustreil 6 лет назад
The Tool Guy, That was harsh, did your boyfriend cheat on you.
@PresleyMagic
@PresleyMagic 6 лет назад
This video was very helpful. Thank you!
@Jackdelfranco68
@Jackdelfranco68 4 года назад
How do we check for roof leaks. I regularly inspect my attic for roof leaks.
@PoppyRaid
@PoppyRaid 5 лет назад
Hi how would this radiant insulation install work in Portugal Algarve . The Algarve is hot in summer with cold nights in winter. Humidity is average 65 -85 % I think ! With a tiled exterior roof air gap ( 25mm) insulation board air gap 25mm) then plasterboard for the inner finish . Q.. 1: would this be an effective install with at most 50mm radiant insulation -board . 2: is there a concern of sweating in different conditions ? Thank you .
@tacopro218
@tacopro218 6 лет назад
My two cents---each rafter bay from the eave/soffit to the ridge must be vented and that is just the start of the project. This looks like the most labor intensive insulation job that I've seen. Labor=$ and good luck.
@jackherer5728
@jackherer5728 6 лет назад
Taco Pro dura vent from the soffit to the attic, That's what I was taught !
@Kevanc9
@Kevanc9 6 лет назад
i was about to post the same thing about venting each rafter bay. Pain in the ass.
@curioushooter
@curioushooter 6 лет назад
With a metal roof this would not be a problem. The soffit material is continuously vented and so is the ridge cap, so it wouldn't be any more difficult than a normal roof install. Besides, metal roofs are lighter, cheaper, and last longer. Nobody should be using singles anymore.
@donnievick6977
@donnievick6977 6 лет назад
curioushooter I'm about to install a new roof in Florida. My house is a very simple rectangle with two hip ends. I've been doing some research and have decided to install a metal roof. I have a construction background and feel I can handle the project since the roof is so straightforward. My question is, do I gain efficiency by laying 2x4's on the roof before I put the metal roof down as opposed to just putting the roof directly on the barrier covering my tongue and groove roof? it would seem that it would give me more circulation, but I'm worried about denting the roof should I ever need to get on it because there are spaces with the 2x4's under the metal. I'm also guessing the gauge of the metal would play a factor too. Thanks.
@curioushooter
@curioushooter 6 лет назад
I would definitely ask a local roofer or contractor. Florida is worlds different that where I live. I have found in general metal roof (like Pro-Rib stuff you get from Menards) to be very easy to work with with the rubber-washer screws made for such roofs. Often you will use 2x4 purlins on the rafters and screw directly to those purlins instead of to plywood roof decking, but I am not sure that this is allowed for residential. It sure works well enough though.
@truthseekerKJV
@truthseekerKJV Год назад
I bet this would cause a big problem with determining the location of roof leaks. In fact, you may not even know about roof leaks because it would divert the water away from the ceiling and by the time you knew a roof leak existed the damage to your home would be far more extensive and expensive to fix. To cool the attic in the summer, a whole house fan installed and vented outside would take care of that problem.
@brownpotatoe3624
@brownpotatoe3624 5 лет назад
Can I put baffles in the stud bays then batt insulation on top of that? I have 2x6 studs on my ceiling. I have a vaulted ceiling and I wanted to insulate it and drywall it but I don't have any vents. I want to put baffles in the stud bays on the underside of the roof between the insulation. Although there's no vents there's still outside air coming in. Also, should if I use baffles should I baffle the entire stud from top to bottom or just do half to the top?
@mudbrats
@mudbrats 5 лет назад
will this not cause ice damming on the eves as there is no insulation between the eve vents? Is that not the purpose of the foam attic batts to allow insulation to get to the edge of the overhang?
@kellykosdas9667
@kellykosdas9667 8 лет назад
can u put kingspan in between roof joists
@jimbonewguy3175
@jimbonewguy3175 5 лет назад
What about the rafter spaces that don't have eave vents? Usually it's only 1 in 6 that are vented.
@percyfaith11
@percyfaith11 2 года назад
That's substandard and probably violates code.
@523hotsauce
@523hotsauce 7 лет назад
@4:56 I don't have ducks in my stinkin' attic! I'm glad they would be safe though.... :)
@kampundsabah2723
@kampundsabah2723 3 года назад
If the roof starts leaking, it is not possible to notice a leak damage behind these panels. I would use detachable foil layer instead. Kind of like a curtain with the curtain rings and rods on top and bottom so that it is movable for inspection. Also I would use forced ventilation for the attic in order to vent the heat out.
@guruofendtimes819
@guruofendtimes819 2 месяца назад
Compared to spray in it is much better. A small hole can be made for camera inspection
@davidirby2177
@davidirby2177 6 лет назад
Where can I get this SilverGlo? I cant find it at Home Depot or Lowes. Would it work for insulating my floors in a very old home?
@stephenrodgers9923
@stephenrodgers9923 2 года назад
I understand the concept of sealing the attic like the a living space but do you have to install another air duct coming off your unit and if you did would that make you unit run harder?.
@B._Smith
@B._Smith 4 года назад
My vents are in like evey 4th bay so how do all the bays ventilate if coverd?
@billmitchell5805
@billmitchell5805 3 года назад
Good Day, If I was planning on replacing the old roof ( 20 yrs ) could replacing the entire roof of a 3,000 sq ft house be an option rather than this new barrier product? Using that new 4 x 8 sheets with the aluminum glued directly to each wood panel?
@stevehenry7914
@stevehenry7914 2 года назад
The Techshield decking you describe is very expensive to replace. Don't do it if your existing OSB or plywood decking is still good. Go to a roofing supply store (not Lowes or HD) and ask about a radiant barrier that takes the place of felt paper. Stuff is very thick and strong, plus very shiny and reflective. About $ 230-250 per roll and you might only need 3 rolls. Have your roofer use that.
@ctb2814
@ctb2814 6 лет назад
Seems like the best installation of this type of insulation should go above the wood sheeting and under a metal style roof. I did this with just two inch Styrofoam and cut cooling heating costs drastically.
@ScottHz
@ScottHz 4 года назад
They do that, too, it’s preferred, but only feasable if you were already going to be replacing a roof.
@uposmile1058
@uposmile1058 3 года назад
Styrofoam? Did you paint it silver before installing?
@dissectingdiy
@dissectingdiy 4 года назад
I got this system and it’s springing air leaks and appears to be contracting in extreme cold.
@JodianGaming
@JodianGaming 7 лет назад
So would you have to put ducting into your attic after this? My ducting (as an example) is in a crawl space under the house. My attic relies on air movement to not only regulate it's temperature, but to also prevent the formation of mold and mildew. Air inside the attic would get pretty stale without being moved around. In addition, my roof is a pyramid shape, so there's really no top ridge to vent.
@djstringsmusic2994
@djstringsmusic2994 7 лет назад
If it's actually air tight like they say, then there is no air movement, like a finished room, so you would probably want and vent and return put up there.
@JodianGaming
@JodianGaming 7 лет назад
Dj Strings Music ... Huh. That actually seems like a waste of energy, heating a room you don't use when you could just have natural airflow that costs absolutely nothing. Wouldn't it just be better to lay the radiant barrier on the attic floor as an additional layer of insulation?
@djstringsmusic2994
@djstringsmusic2994 7 лет назад
Yeah thats what I'm wondering, this seems like it would be good for creating a usable area, but if you're planning on leaving the attic for storage it doesn't make much sense to me.
@eldude9962
@eldude9962 7 лет назад
Dj Strings Music o
@eldude9962
@eldude9962 7 лет назад
P
@johndolan513
@johndolan513 7 лет назад
This shit has to be super expensive, every comment with a price question is ignored!
@Lordporter1
@Lordporter1 5 лет назад
If you have to ask, you can’t afford it lol
@AnthonyBrusca
@AnthonyBrusca 6 лет назад
Instead of blocking, could you install the rigid foam, then put closed cell foam in there? Small amount of foam, less labor.
@romansten9
@romansten9 7 лет назад
this 4 foam is great. however, you wasted a huge potential space for more insulation between the rafters. you could have sealed this foam between each rafter...with air gap of course.... OR: you could have put several different types of insulation between the rafters with an air gap and still put those four inches over that
@leor838
@leor838 6 лет назад
I would like to see this product installed on a pre-fab truss roof with a low pitch.
@Kiddro22
@Kiddro22 3 года назад
Good luck
@BourneAccident
@BourneAccident 9 лет назад
What's the R value?
@ja.935g67
@ja.935g67 2 года назад
If you have a roof leak water from behind these, how will you see it?
@joelt8915
@joelt8915 6 лет назад
I just had this installed. The four inch foam blocking. Is there supposed to be fill gap foam between every piece square block? They installed it and I noticed that there wasn’t foam or caulking between each piece. I can feel some airflow and thought it was supposed to be air sealed? Also at the base where the roof meets the soffit. The foam blocking doesn’t sit flush. It sits outside and in front of the silver glow above it. I just spent 7500 and I haven’t noticed a difference. I actually had to turn my heat up. I’m worried that if the foam isn’t flush with the walls below. That any heat that comes up the wall will be lost. Is there a quality control guy I can have come out?
@hafizaweh1856
@hafizaweh1856 3 года назад
If the attic have window will the super attic still be effective and can it be cover by a wood from both side ?
@Harrison2253
@Harrison2253 6 лет назад
Does this insulation have to be covered with a "fire rated" material like sheet rock ?
@Mystic45708
@Mystic45708 2 года назад
Can I use this in my garage up here in Canada’s north, the same way you have it in demonstration.
Далее
Do Radiant Barriers Work? - LP Techshield Review
5:57
Просмотров 762 тыс.
How to Re-Insulate Your Attic - Insulation 2.0
18:35
Просмотров 425 тыс.
BABYMONSTER - ‘FOREVER’ M/V
03:54
Просмотров 8 млн
How the hell is this done#joker #shorts
00:14
Просмотров 2,4 млн
Attic - Radiant Barrier
4:39
Просмотров 20 тыс.
How To Insulate A Warm Loft
25:19
Просмотров 207 тыс.
It's Too Hot - Roof Radiant Barrier To Block the Heat
12:04
Mapping Your Home to Optimize Air Sealing
6:45
Просмотров 34 тыс.
Стильная упаковка
0:14
Просмотров 1,5 млн
Tu valides ? Do you validate? 😀
0:13
Просмотров 11 млн
Жидкие носки)))
0:19
Просмотров 2,2 млн