No video :(

Installing a Steering / Tilt Tube onto a 15 HP Evinrude Outboard

Подписаться 53 тыс.

Просмотров 92 тыс.

50% 1

Video showing you how to install a steering tilt tube onto a Johnson / Evinrude 9.9 or 15 HP outboard.
Needed part numbers are:
0124346 SPACER, Tube. Remote Electric Models
0321511 TUBE, Stern brkt. to swivel brkt
0335554 NUT, Lock, tilt tube. Remote Electric Models

Опубликовано:

6 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 49

@michaelp3542 6 лет назад

Yeah I check it out and I think you got me set up in the right direction now. I appreciate it. I'll let you know how it goes when I can get it all together.

@hooklinetinker9680 5 лет назад

If only the stern bracket bushings and the tilt bolt on my 1986 15 hp Johnson would come out as easily as yours did. If I am successful at removing them without destroying the brackets I'll make sure to lubricate them really well. Thanks! Great instructional video.

@radioguy1620 6 лет назад

Great video , I need to do exactly what you did to my 15 . thanks

@takis150 3 года назад

Thank you very much ..I got a jr15rsrs,not the same exactly as yours ,but you've helped me out ....ty!?

@michaelp3542 6 лет назад

Thanks a bunch man!

@BrandonsGarage 6 лет назад

Gave the other video a watch? Got you pointed in the right direction?

@davekimbler2308 4 года назад

I guess it’s a good thing at least one of your 15’s had it ! What years are they ( 81 or 82 ) I didn’t get a real good look at the graphics .

@pieseasmyseas 3 дня назад

Where can I find the flat mounted one, I have a 75 evinrude and i think that year doesn't accept a tilt tube.

@michaelmalott9265 7 лет назад

I have a brand new 2015 9.9 mercury tiller motor and I would like to convert it into a steering motor with everything( steering wheel, cables, throttle and all). Can you help me out and which kit do I need? And how to put it together

@jasonbaldwin2734 3 года назад

Great Videos. I would like to add remote steering to my 1999 8hp Johnson J8REEM. Is this possible? I don't see a tilt tube part for it. It also doesn't have anywhere to mount the steering mechanism like the videos you posted. I guess there is another bracket required?

@timersk1 3 года назад

I’m wondering if you know how to mod the throttle for remote throttle so it can be controlled at the Helm.

@Adam12Designs 5 лет назад

I have a 1980 35 Johnson and it does not have a tilt tube. I need to put one on it and I have a spare parts motor that has one. The the rod that runs through the non-tilt tube motor is very rusted and the nut is corroded. Can I cut that bolt? Is it possible to send you some pictures of it to get your opinion?

@sbranham86 2 года назад

I need one of them tiller handles and throttle setups

@BrandonsGarage 2 года назад

Pretty easy to come by really...

@JoseRoberto-oy8pc 2 года назад

Is it possible to install on a motor like the one next to the one you installed The original screw fixing it is different from the one you installed. Excuse- me the english. I m Brazilian. Thanks

@MattWho777 7 лет назад

Are you going to make a video on how to install the remote steering and throttle cable?

@BrandonsGarage 7 лет назад

Yes, when I install the engine onto the boat. We're probably 2-4 weeks away from that though.

@Ardass486 3 года назад

The

@ericthigpen241 3 года назад

hey will this work for a 76 evinrude 15?

@Shokenryu 2 года назад

Wondering if we can find an alternitive threaded tube from loews or home depot 🤔🤔

@BrandonsGarage 2 года назад

oh gosh no. the inside diameter is pretty unique.

@Blue-yr8jt 4 года назад

On my 87 9.9, I am trying to run my stick steering cable through the port side of the tilt tube and swing the drag link to the starboard side. However, the link is clearly made to swing port side (it is bent so as to allow clearance around tilt tube) and hook up there. Is it possible to fabricate or even source another link from another motor?

@BrandonsGarage 4 года назад

BRP made a link for Port, and one for Starboard entry for this- Part numbers are: 0433845 DRAG LINK & BRKT. ASSY. Starboard Entry Cable 0434080 DRAG LINK & BRKT. ASSY. Port Entry Cable You may have better luck finding the kits- 0174212 STEERING KIT. Starboard Entry Cable 0434079 STEERING KIT. Not Shown Port Entry Cable And, if none of those work, search ebay for "Evinrude 9.9 Steering" and start scrolling. Problem is the part number isn't stamped on them, so people trying to sell one usually don't know the correct part number; and list it however then can.

@Blue-yr8jt 4 года назад

Having trouble finding it in stock anywhere but thank you for your help again. I will keep my eyes peeled on eBay and parts sites.

@phinomenon8692 3 года назад

i have the one with the smaller holes (Model: 10824M) How would i go about remote steering? Basically the 2nd motor you had. Boat has a large transom plank to work with.

@rok7980 2 года назад

Brandon, i am trying to get the old tilt tube out of my evinrude 88hp engine. The nut on the cable side is free, but the opposite side will not budge. When I try to turn it, the whole tube turns. Any suggestions would be greatly appreciated. Heat, impact wrench or anything I can try. Thanks.

@BrandonsGarage 2 года назад

you only need to get one nut off; once its out, do what you can to side it.

@BrandonsGarage 2 года назад

holes too damn bad

@rok7980 2 года назад

@@BrandonsGarage Thanks. I am trying to get the stuck side off so I can pump some oil through the steering cable. The cable runs through a hole in the transom and there is no room to remove it. The tube seems good now that I cleaned and greased it.

@rok7980 2 года назад

@@BrandonsGarage Thank You.

@technologyguy101 6 лет назад

What do you do if you have the style that cant take a tilt tube?

@BrandonsGarage 6 лет назад

I have a video just for that! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-JWDkioSeK08.html

@technologyguy101 5 лет назад

@@BrandonsGarage Thanks for the reply, what is the size of the tilt tube? And what size thread?

@michaelp3542 6 лет назад

What site are you on? I'm looking for a remote conversion for my 25hp evinrude tiller motor. Any tips?

@BrandonsGarage 6 лет назад

What year? and that was shop2.evinrude.com

@michaelp3542 6 лет назад

Brandon's Garage I have a '93

@michaelp3542 6 лет назад

Been searching for hours on what I need lol

@BrandonsGarage 6 лет назад

Well, depends. Does your engine have a Tilt Tube? If not, you have have some trouble with steering. Otherwise, for shift and throttle, you'll need 'Remote Control Adapter Kit' 20/25/30 HP 2 Stroke 1990-2005 P/N 0433720

@BrandonsGarage 6 лет назад

...but that kit is discontinued.

@brandonandsons2353 6 лет назад

my tilt tube is being a pain in the but. i trying to slide mine through and i am failing miserably at it

@BrandonsGarage 6 лет назад

Everything is coming out of alignment? Did you clean the outside of the tube first?

@brandonandsons2353 6 лет назад

Brandon's Garage yes i did. mine is just a weird one it had a tube that you put the other tube through and connect it with the bolt. I managed to get mine all together so it does what it's supposed to do