Тёмный
No video :(

Installing an Undermount Sink in Butcher Block: Part 44 - RAM Promaster 2500 Van Build 

Marc & Tania
Подписаться 2,3 тыс.
Просмотров 9 тыс.
50% 1

Installing an Undermount Sink in A Butcher Block Countertop: Part 44 - RAM Promaster 2500 Van Conversion
Hey All!! Well… Today we are staying with the construction of our kitchen cabinets. In our last video, we went through the building of the actual cabinet box. We also added `face frames and started installing drawer slides. In this video, we will be concentrating on the installation of the undermount sink in our butcher block countertop. This involved cutting and finishing the butcher block…as well as cutting and routing the sink hole. We are really pleased with the way it came out and hope you get a lot from watching this video.
Follow along and you’ll see each step that we took to get this little project done.
If you have any questions, please feel free to leave a comment below, and please give a thumbs-up if you enjoyed this video and found in helpful to you. Subscribe to our channel to follow along on our entire van build series.
Blessings to you :-)
Marc and Tania
---------------------------------------------------
Some products we reference in this episode..
25”x72” Rubberwood Butcher Block Countertop. If you are in the Atlanta area, you can find it at Suwanee Lumber.
Karran Undermount Quartz Composite 17in Bar Sink in White
amzn.to/3Ec0bBV
Makita XVJ03Z 18V LXT Cordless Jig Saw
amzn.to/3EcPi2C
Ridgid, R22002, 2 HP Fixed Base Router
amzn.to/44t3wHk
Makita XB01Z 18V LXY Random Orbit Sander
amzn.to/3OSuMtj
Starstar Undermount Sink Clips 8 pack
amzn.to/3OHK8Ra
Freud 50-118” ¾” Dia Top Bearing Flush Trim Bit Red
amzn.to/3QTP0Fl
Woodworking Clamps
Carpenters Square
As per the Amazon Operating Agreement, I am a participant in the Amazon Services LLC Associates Program. As an Amazon Associate, I earn from qualifying purchases. This is an affiliate advertising program designed to provide a means for this content to earn advertising fees and commissions by linking to Amazon.com and affiliated sites. This is at no cost to you. Thanks for your support.
Our Promaster 2500 Van Conversion Playlist:
• Van Build Series
If you like any of our videos, please consider subscribing. And click the notification bell to be alerted when we release a new video.
#vanbuild
#vanlife
#campervan
#vanconversion
#homeiswhereyouparkit
#vanlifediaries
#homeonwheels
#projectvanlife

Опубликовано:

 

25 авг 2023

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 27   
@cnicoloff1384
@cnicoloff1384 10 месяцев назад
Love you videos. Looking forward to see the sink plumbing video.
@marctania2349
@marctania2349 9 месяцев назад
Coming soon! And thank you
@PapaJohn66
@PapaJohn66 10 месяцев назад
Awesome video guys! I love the attention to detail.
@marctania2349
@marctania2349 9 месяцев назад
Thanks so much!
@Tru_G.R.I.T
@Tru_G.R.I.T 11 месяцев назад
Impeccable as always!
@marctania2349
@marctania2349 11 месяцев назад
Haha....Thank you :)
@mr_robot_1835
@mr_robot_1835 11 месяцев назад
Great video, God bless 🙏
@marctania2349
@marctania2349 11 месяцев назад
Thank you! And you as well :)
@igoslomo
@igoslomo 11 месяцев назад
Another beautiful job and informative. I really appreciate y’all. And I hummed the rocky theme!! LOL Hope you tell us about the Faroe Islands. It’s on my list!
@marctania2349
@marctania2349 11 месяцев назад
We are having an amazing time in the Faroes....You would love it....
@msterrim81
@msterrim81 11 месяцев назад
Awesome love. the kitchen area!
@marctania2349
@marctania2349 11 месяцев назад
Thank you! Thats all Tania....I just build what she says :)
@msterrim81
@msterrim81 11 месяцев назад
@@marctania2349 Go Tania!
@Scrambler85
@Scrambler85 11 месяцев назад
Nice work, cutting the counter top was stressful 👍
@marctania2349
@marctania2349 11 месяцев назад
Yes it was!
@patricklions9066
@patricklions9066 4 месяца назад
Correct, this video explained several finer details I hadn't come across yet. I hadn't even considered the inside edge using a router, guess I was gonna jig saw it but that wouldn't of looked good.
@marctania2349
@marctania2349 4 месяца назад
Yeah, the router is way cleaner....but, wow, it makes a mess
@TeutonicNordwind
@TeutonicNordwind 11 месяцев назад
Beautiful job, Marc! Nobody can accuse you of not thinking things through LOL. Man, that last shot where you could see the overhead cabinets, the counter & sink, headliner and in relation to the front "cab", it is REALLY looking good! We are getting anxious as we finally have at least been given a "scheduled ship date" from Dodge of Aug 28 out of Mexico (of course it could be another 5 or 6 weeks after shipping). Really looking forward to the continuance/completion of the shower stall etc. Faroe Islands! I saw a video on them and they look enchanting. I think maybe part of Scotland? Enjoy! (96 is nasty! we've had over 90 and humid in Mich this past week too) Dan & Cheryl in the mitten
@marctania2349
@marctania2349 11 месяцев назад
Oh man....the van will be in your driveway soon enough. Cant wait to see what you do with it. Yes, the Faroe Islands are quite outstanding......we got a lot of rain today but hoping tomorrow will better. And I love the reprieve from the heat.
@lindadunlavey
@lindadunlavey 11 месяцев назад
What sink did you choose, size and where did you purchase, please? Great job and I did hum Rock theme. Have fun on your trip!!!
@marctania2349
@marctania2349 11 месяцев назад
I think we have the link to the sink in the video description....I think its 17" and purchased through Amazon.....
@gonewiththekale
@gonewiththekale 8 месяцев назад
Did y'all buy the fridge yet? Do you know what one you're getting? I don't see a video on it yet. Happy Thanksgiving 🌻🍁🍃🦃
@marctania2349
@marctania2349 8 месяцев назад
Yes we bought this one. Just a note, it just barely fits.....I think we have it on. 4" platform and the butcher block sits just above it. But it looks and works great Cruise 130 Elegance Black, 4.6 cu.ft., AC/DC, Black Door, 3-Sided Flange
@patricklions9066
@patricklions9066 4 месяца назад
Biggest choice for me is epoxy or polyurethane. I keep getting told polyurethane will not be water phobic enough to protect butcher block in an undermount configuration. Epoxy they say will work..but epoxy is more of a pain to apply. They make triple thick poly, I think I might do 10 coats of that. That's gotta be thick and eater resistant. Seeing you use poly made me feel more comfortable going with the poly, it's easier to work with.
@marctania2349
@marctania2349 3 месяца назад
The poly seems to be holding up pretty well
@tauruszuma
@tauruszuma 4 месяца назад
Great craftmanship but you're either retired or paid by the hour
@marctania2349
@marctania2349 3 месяца назад
I'm neither.....I'm just really anal about stuff that has my name on it. To be honest, I would do it the same way if I had to again. It was more work....but really looks nice
Далее
Sink Cutout in Butchertblock Countertop
5:30
Просмотров 27 тыс.
I Don't Get Why People Still Use These Joints
17:26
Просмотров 721 тыс.
Kraus Undermount Kitchen Sink Installation
5:52
Просмотров 54 тыс.
Bad Beginner Cabinet Tips
24:21
Просмотров 1,1 млн
DIY Easy Undermount Sink Install
4:08
Просмотров 291 тыс.