Eurospec DRL Fog Lamp Parts Used :- OSRAM H7 25W LED BULBS ( LOW + HIGH BEAM ) OSRAM H8 25W LED BULB ( FOG LIGHT ) P21W BULB (DRL) P21W Connector 2 x 15 Amp FUSE
While you were at it, should’ve changed the front indicators to amber LED’s as well. I have changed the rear brake lights, indicators and single reverse light to all LED set up. Looks like a high end euro car now from behind.
@@noboom6808 leds consumes less power than halogen bulbs so it won't be a problem .... for example stock bulbs consumed 55w now led bulbs consumes 25w almost half the power.
Fabulous job. Part No of the Skoda Laura H8 connector installed behind the DRL bulb ? Waiting for the courtesy lamps installation in the door cards & the puddle lamps.
@@dheerajsingh9449 Looking forward to it. I drive a Vento Highline 1L TSI MT. All halogen bulbs including the parking lamps in headlight & tailights changed to LED. Only upgrades left are the DRLs, puddle lamps in the mirrors & courtesy lamps.
@@navmeet7great bro 1L Tsi MT vento is the fastest 1Ltsi from the factory and there is one more light upgrade left that I am going to upload soon and it is going to be a surprise.
Bro aozoom is a very good brand And it offers some really high power Leds but I would suggest inside a reflector housing u should not use very high power leds because the beam pattern would not be the best + Aozoom Leds are very costly compared to Osram though both are German brands, car originally comes with osram bulbs 55w each and now I am running 25w osram leds so the load on the wires is less too and if u want to install leds more than 55w then relay wiring is a must as stock wiring is not sufficient for high power consumption and it can lead to burning/heating of wires in the worst case.
u sure...DRL is connected to stock wiring.....as DRL should dim when lights are turned on.....doesnt seems to be the case here or is it.....btw that Polarity of LEDs explaination was straight out lifted from a red car guy...hehe
These DRLs are fitted with additional wiring only 12v signal is taken from stock wiring so they glow with full power Diming effect should come if drl wire is connected to a canvas/module as it is in interior lights So if these headlights had stock drls like in rapid rider variant tapping into that wire will definitely dim the additional drls and yeah I luv watching red car guy videos they are really informative 👌 😊
For that u would need a metal plate adapter so the horn can fit on to that and after that just connect the unused factory connector directly to the horn
