No video :(

Installing Flatout on Your Fat Tire Electric Bike

Подписаться 3,9 тыс.

Просмотров 5 тыс.

50% 1

Today I will show you how easy it is to install Flatout Tire Sealer on a fat tire electric bike.
Flatout Tire Sealer: amzn.to/3SWkStF
Business Contact: lcccruises@gmail.com
----------------------------------------------------------------------------------------------------------------------------------------------------
E-BIKE DISCOUNTS
MOONCOOL DISCOUNTS: Click link and use coupon code LANCECLARK www.mooncool.c...
HAOQI EBIKES
haoqiebike.com?sca_ref=5681955.nebaK82V99&
RAD POWER BIKE DISCOUNT: Click link and get a $50.00 discount rwrd.io/n0ew1px?c
----------------------------------------------------------------------------------------------------------------------------------------------------
My Amazon Affiliate Links. As an Amazon Associate, I earn from qualifying purchases at no additional cost to you.
Ebike Items I Use On The Lectric XPeak
HandleBars: amzn.to/49nmUc4
Suspension Seat Post: amzn.to/43Nl4y6
Comfort Seat: amzn.to/43linUv
Seat Post Shim: amzn.to/3SS9T37
----------------------------------------------------------------------------------------------------------------------------------------------------
Ebike items I use for the RadRover 6 Plus:
Flatout Tire Sealer: amzn.to/4659Ma5
Handlebar Extender: amzn.to/45BApU2
Suntour Suspension Seatpost: amzn.to/43Nl4y6
Suntour Setpost Spring for Heavier Riders: amzn.to/3p66mTZ
Bike Stem: amzn.to/3WOGxUZ
POSIKO Phone Mount: amzn.to/45WNEPB
Vicseed "TANK" Phone Mount: amzn.to/3MQD6IY
Chain Lube: amzn.to/3oJDpxa
Cloud 9 Seat: amzn.to/43linUv
Bikeroo Oversized Bike Seat: amzn.to/3oPtqGy
ROCKBROS Bike Bag Phone Mount: amzn.to/3WL88GC
Bike Mirrors: amzn.to/3qmA3AK
Fox Racing Motocross Gloves: amzn.to/3oGPqU5
Hollywood Bike Rack: amzn.to/3qnQ1ue
----------------------------------------------------------------------------------------------------------------------------------------------------
Ebike items I use for the Himiway Zebra:
Handlebars: amzn.to/44ZfngT
Handlebar Stem: amzn.to/44CNdZw
Handlebar Extender: amzn.to/43Ef1LP
Suspension Seat Post: amzn.to/3Kyewwf
Cloud 9 Seat: amzn.to/43linUv
SENQI Locking Bike Grips: amzn.to/3s7fUjk
----------------------------------------------------------------------------------------------------------------------------------------------------
Adventure Products I use:
Osprey Talon 6 Lumbar Waist Pack
amzn.to/3rMRRW7
MSR PocketRocket 2 Ultralight Mini Stove Kit amzn.to/46wvsM0
Mountain House Adventure Meals
amzn.to/46zeWL5
Plazma Lighter
amzn.to/3QFRCGn
GSI Long Silicone Spoon
amzn.to/45g2zm...
Bear Grylls Folding Gerber Knife
amzn.to/46gwPyz

Опубликовано:

14 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 85

@briancloutier2781 Месяц назад

I just put in on my fat tire Aventon. Had some issues. It went in good in rear tire not so much in the front tire. I had to keep clearing the valve in the front tire because it would not go in. The second issuer was both tires coming off the rim when inflating. I had better luck turning the bike over to take weight off the tires.

@ruelbautista9966 Месяц назад

How does it ride after u put that in

@briancloutier2781 Месяц назад

@@ruelbautista9966Seems like the front tire is slightly out of round. Back tire ok

@Alpha550 Месяц назад

I had the same issue with the tire not sitting on the rim properly. I didn't turn my bike over instead I used a manual pump with one hand and squeezed my tire with the other until it got properly seated then I used my electric pump.

@briancloutier2781 Месяц назад

Thanks I will keep that in mind if I have to change a tube

@jimmydean358 2 месяца назад

Yup I use it in my fat tire Ebike works awesome. 470 miles so far and NO flats. And I have been over thorns glass ect and still good.

@theridewithlance 2 месяца назад

Thats great.

@yaellopez6750 15 дней назад

I have patched the front 2x and just did the back for the first time yesterday. I need to buy this

@MrNAMASTE1968 3 месяца назад

Great video! I found out the hard way 2 days ago, when i had to walk my ebike 3 miles to the nearest train station after running over a wood screw then realizing i left my tools and patches at home. Just got my flatout today.

@theridewithlance 3 месяца назад

That was a long way to walk your bike. I think you will have better lucj with the Flat Out.

@MrNAMASTE1968 3 месяца назад

@theridewithlance7013 I think so, too. Luckily, the rim stayed within the tire, so there was no rim damage. A lesson well learned. Lol

@kn3954 2 месяца назад

Thanks for posting. Just bought two bags of FO...one for my 26x4 tires and one for my gf's 20x4 tires. I'll be adding it to both bikes this weekend.

@theridewithlance 2 месяца назад

Thats great.

@MontrealRides 3 месяца назад

Thanks for the clear step-by-step! After my recent puncture experience and having to replace the tire, I was looking for an less expensive prevention method. I had heard about sealants, but never how to use it. This clears things up! 👍 (psst... I've subscribed!)

@theridewithlance 3 месяца назад

Your welcome, and thank you.

@Rip1Outdoors 6 месяцев назад

Good job Lance. Nice quality

@theridewithlance 6 месяцев назад

Thank you.

@jamesbonham5383 6 месяцев назад

Thank you, a very clear presentation.

@theridewithlance 6 месяцев назад

You are welcome!

@jasonngo6110 2 месяца назад

Very informative and easy to follow tutorial. Thank-you!

@theridewithlance 2 месяца назад

Your welcome.

@terryrccrazy6993 5 месяцев назад

Nice video. I will be putting some in my ebikes in the spring

@theridewithlance 5 месяцев назад

Right on!

@Ebiketips1 6 месяцев назад

Nice job Lance 🔧

@theridewithlance 6 месяцев назад

Thank you.

@pedrofernandez8729 6 месяцев назад

Now you tell me!!! 2 weeks after a flat left me stranded miles from home.

@theridewithlance 6 месяцев назад

Oops......sorry.

@pedrofernandez8729 6 месяцев назад

@@theridewithlance Just messin' with you, amigo.🚴🚴‍♂🚴‍♀

@theridewithlance 6 месяцев назад

Yeap, I was just messin back. @@pedrofernandez8729

@SamFreedom 8 дней назад

I have like 5 questions: 1. Should you shake or mush the Flat Out around to keep those kevlar fibers evenly dispersed, or do they not clump? 2. On my bottle, it refers to a stem removal tool somewhere on the bottle like maybe with the cap part you remove? 3. You didn't let our every last bit of air, just until the pressure evened out? 4. Do you know something I don't know as regards to PSI? My original Radrunner says 60psi. That sounds like a lot. Plus I'm 300lbs, so i max it out. Between your *personal* choice of 20psi, and my bikes tire saying 60psi, is there some sort of bike mechanics wisdom that thinks that number is flexible? Or does a guy in my situation HAVE TO use what it says on the tire? 5. You said instructions said half bag, 16oz, per fat tire. My bottle says 1/4 per bike tire. Thanks.

@theridewithlance 8 дней назад

1. The Flatout stay liquid in your tire. So when you ride it constantly coats the inside of the tube, so you dont need to worry about it clumping. 2.The valve stem tool comes with some bottle or bags, but not all. It should say in the description if it does, or you may have to order it separately. 3. When you remove the valve core from the valve stem, all air will flow out. 4. I have 26X4 inch fat tires. They have a PSI range of 5psi min, to 35 PSI max. For the type of riding I do, I found 20 psi works the best. No bike mechanics wisdom, just comfort level. So no, you dont have to use whats on the tire, just stay in the minimum and max range that fits your comfort level when riding. That is the instructions on the bags I used for a fat tire bike with 26 inch wheels. 20 inch wells would use less.

@synchemist6462 2 месяца назад

It works great to fix a flat also.

@theridewithlance 2 месяца назад

Awesome

@CarlosGonzalez-ln9rz 21 день назад

Hello, I just came across your video. I have a lectric xp3.0 e-bike. My question is, Does it matter which flat out I get there's 3 different types of bag's. There's a green, yellow and gold strip on the bag. Which one is the best one for my bike? Also My Bike came with slime already in it. It's going on one year I had this bike. Is it safe to put flat out in my Inner tube?

@theridewithlance 21 день назад

I used the gold "Multi-Purpose Formula" Slime says their sealant is good for two years before its start to be less affective. If you are going to use FlatOut, I would install a new tube and not mix it with Slime.

@CarlosGonzalez-ln9rz 21 день назад

@@theridewithlance Thank you very much for your Advice 🙏 your video helped me. Enjoy your day God bless you and your family bye-bye 👋👋

@honestlynate7922 2 месяца назад

I got my new bike. I put some of this in the tires cause every next day. I ran over a piece of glass glass. I’ve got a huge gouge in my tire, but it absolutely sealed the tube and it’s been riding fine for about a month.

@theridewithlance 2 месяца назад

Fantastic.

@kevincloar2443 Месяц назад

Yes. I just recently purchased some for my e-bike. No telling how many flat tires I got on my cruiser bikes from running over broken glass in parking lots

@briancloutier2781 2 месяца назад

Are you supposed to spin the tires after you put it in? Or is that just for that green slime stuff? Thanks for the video!

@theridewithlance 2 месяца назад

You can, but the stuff stays liquid, so every time you ride, it will coat the inside of the tube.

@kevinjk27 10 дней назад

Same question. Thanks

@johnhoang1750 3 месяца назад

The bag clearly says 1/4 of bag per tire for bikes. Can you put too much or does it just make the tire heavier?

@theridewithlance 3 месяца назад

16oz for 26x4" fat tires. The bag I had was a 32oz bag. So half a bag per tire. If you put too much you might get an unbalance wheel.

@MrNAMASTE1968 3 месяца назад

@theridewithlance7013 This really cleared things up for me. I was concerned about the measurements as well. And my tires are also 26×4". Thanks.

@theblowupdollsmusic 3 месяца назад

I saw in another video somebody said if you have 20x4" smaller fat tires, it's 10oz of flat out per tire. So it would make sense to add six more ounces for six more inches.

@theridewithlance 3 месяца назад

@@theblowupdollsmusic Sounds about right.

@586702 6 месяцев назад

Awesome thank you

@theridewithlance 6 месяцев назад

You bet!

@FubarMike Месяц назад

Does it say how much flatout you would need for a 20x 3 inch tire? I assume it's going to be way less than half the bag.

@theridewithlance Месяц назад

8 to 10 ounces per tire.

@martybyrde Месяц назад

Liquid won’t go in the innertube when I try squeezing the bag, any tips Lance?

@theridewithlance Месяц назад

Did you remove the valve core from the inner tube firsts? If not remove it before trying to squeeze in the flatout. If you have removed the valve core you may have a clog in tube that connect to the valve. This happened to me a couple times myself and I just had to clear it. Try squeezing it out, or take something thin you can use to push it out of the way. Also make sure your tube valve is at the 3 oclock or 9 oclock position. you dont want to try and fill it if the valve is at floor level.

@MrCarloxherrera 3 месяца назад

Thank you very much for your video! Question: does it work with inner tubes too?

@theridewithlance 3 месяца назад

Yes.

@jodythomas 3 месяца назад

Great easy to understand video. I would like to know what attachment you used to air up your tires that tells you when the tire pressure reached 20 psi. I've been looking for something like that but haven't found one.

@theridewithlance 3 месяца назад

I used a air compressor that has a PSI needle on it. Similair to the old style gas station air hoses used on vehicles. Now, I have a portable rechargeable handheld I got from Lectric. You can program the PSI level you want and it will automatically cut off when it reaches it. There are several companies now that make them. Just do an Amazon or google search for "Handheld Air Compressor" and you should see a pretty good selection.

@jodythomas 3 месяца назад

@@theridewithlance thanks!

@manFromPeterborough Месяц назад

@@theridewithlance Xiaomi mi pumps are good, except when they blow the piston ring, a 50 cent 15mm O ring from the hardware store got me out of trouble

@theblowupdollsmusic 3 месяца назад

Also, for places with winter climates, does the liquid buildup if the bike sits in the garage? Or should the wheels be spun every couple days just to keep it from pooling or drying towards the bottom? Thanks again.

@theridewithlance 3 месяца назад

The liquid never dries, but spinning the wheels every one in a while would not hurt if the bike is going to sit for long periods of time. I have had no issues with the bikes that have sat for several months without spinning the wheels.

@theblowupdollsmusic 3 месяца назад

@@theridewithlance Thank you so much for the insight. I appreciate your time.

@theridewithlance 3 месяца назад

@@theblowupdollsmusic No problem.

@leenlou3562 6 месяцев назад

Ordered I ride mainly on the flat but I don't want to push my rad 6 home for several miles good advice,only question i have dont you have to rotate the wheel to spread it as if i did it then i didnt use the bike for several days would it just be sat at the bottom of the wheel.thanks.

@theridewithlance 6 месяцев назад

It is designed to stay liquid for up to 10 years. So you dont have to rotate it.

@theblowupdollsmusic 3 месяца назад

Thank you for the tutorial, but do you have to deflate the tires first before you add the flat out? I thought you had to for some reason.

@theridewithlance 3 месяца назад

Yes you do. You have to pull the valve core out to get the flatout in, and this will deflate the tire.

@theblowupdollsmusic 3 месяца назад

@@theridewithlance Thank you so much, I'm dumb. I just realized removing the valve core automatically deflates the tire lol. Thank you for the quick response.

@richardtangeman2461 3 месяца назад

So do you rotate the tire for awhile to spread it out inside or does it not get hard

@theridewithlance 3 месяца назад

It stays liquid. Last up to 10 years.

@Cyber-ep2tu 3 месяца назад

How much flatout would you recommend to put in a tubeless 14x2.5 tire?

@theridewithlance 3 месяца назад

Sorry, I cant find any info on a tire that size. However for a 20" rim with a tire size less then 3.5" it recommends 8oz. So I would go for 5 to 6oz.

@EffAyyZee 2 месяца назад

My one tyre worked very well then i used on my front tyre and there was like an air lock i couldnt squeeze the flat out into my inner tube anyone got any suggestions

@theridewithlance 2 месяца назад

Have you tried taking something like a pipe cleaner pushed down the tube to try and clear the obstruction.

@thepottmi 2 месяца назад

Can I install this on a bike that has a flat tire? Or do I need to fix first?

@theridewithlance 2 месяца назад

If it was me, I would replace the tube and start new. I have heard of people putting it in after a flat and it worked, but I would replace the tube.

@robertbrooks7936 6 месяцев назад

I like the video, but you didn’t say anything about making sure when you air up the tires to make sure the tire bead seat correctly. Looking at the video Your front tire did not seat correctly right before you cut the video. It’s important that people know how to check that the tires seat correctly or they can blow out the inner tube. It’s best not to use a compressor to fill the tires back up, using a handheld electric pump or a hand pump is the best way to avoid not seating the tires correctly.

@theridewithlance 6 месяцев назад

Yes, I should have addressed making sure the bead sets right when pumping the tire back up. It did seat right though. I did check both tires after I did the rear tire, but yes that is a good point.

@DEADLIESTMAN1 2 месяца назад

you forget to rotate the tire after adding the flat out in it.

@theridewithlance 2 месяца назад

Flatout stays liquid. It will coat the tube every time you ride.

@mk.1175 21 день назад

Do I follow the same instructions if I have tannus armor in my fat tire bike

@theridewithlance 21 день назад

I would believe so. Never had that question before.

@EuroYank 5 месяцев назад

Last step should be to spin the tire so the FlatOut is distributed around the entire inside of the tube. FlatOut stays liquid inside your tire and it will clog your valve stem if you use too much. (Fortunately you can remove and clean the valve core if this happens.) I've used FO in 2 ebikes over the past 4 years without a single flat (knock wood!).

@theridewithlance 5 месяцев назад

Thats great. No flats here either since putting it in.