Thank you!!! Very grateful I don't have to spend a fortune buying this from Amazon. Very nice solution to my folding table. Excellent demo! Please leave the awful music out, and put some text for names of stuff.
@@jomzmanalo7272 Dam from 5 years ago. I never knew so I Googled "Release pin, lock pin, locking finger press pin, telescoping lock pin" till I found them. Pretty sure got a 10 pack off E-Bay.
MagiDeal 6 Pieces 8mm Stainless Steel Kayak Paddle Spring Clips Outdoor Camping Tent Pole Snap Button Clips Single End www.amazon.com/dp/B078V4C74W/ref=cm_sw_r_cp_api_glt_fabc_5SNGKGVXYNNWZ5576YAR
Great Video. Do you guys have angle connectors to connect two pieces of aluminum? For example, a 1 1/4" fitting that slides over the 1" tube and allows another tube to be fitted to the 1" tube at an angle (90, 75, 45, 30, etc). That in combo with these locking buttons would make for weld free joins to make virtually anything you could make with PVC and couplers.
You have two options: 1. Use this from Amazon for attaching this leg to wood table (or metal). 2 Pack Folding Bracket-Self-Locking Hinge-Leg Fittings and Angle Braces-for Folding Legs 2. Use 80/20 brand extruded aluminum instead of aluminum tubing, and they have all the right fittings. They may also have a fitting for tubular aluminum like this.
Thank God you're kind of local. I've been Google searching and Google searching forever for a freaking store that sales these. I will definitely be in to buy some. Do you know where I can get square tube connectors, and end caps etc as well? Thank you, so glad I re watched this video three times, but this time to the end and then I saw 509. Saweet deal!
I was thinking the same thing, for my telescoping aluminum pole which uses round tubes. These clips would probably be hard to align with the holes in a round tube, because round tubes rotate.
What are the actual clips called? I wand to make some pvc tube legs but I've hit a wall trying to find where to get them or what their actual specific name is
@@RGun90 I'm in Australia. The postage cost would end up making these $10 a piece. Found some anyway. Thanks all the same. Needed ones to fit a 43mm tubing
Here as well MagiDeal 6 Pieces 8mm Stainless Steel Kayak Paddle Spring Clips Outdoor Camping Tent Pole Snap Button Clips Single End www.amazon.com/dp/B078V4C74W/ref=cm_sw_r_cp_api_glt_fabc_5SNGKGVXYNNWZ5576YAR
Hi Robert, there is enough pressure from the spring that keeps the button in the hole. As long as you use the right size spring inside of the right size tube. It will not slide down. This particular spring fit inside of our 1" x 1" x .110" wall tube.
