Installing STI WING on WRX 2015-2021 // How to Install 

Thanks for watching the video today! I have included links for a couple spoiler options in the video description! Please consider subscribing for more Subaru content.

I just did this install, using this video as my primary guide. If you are reading this, a couple of pointers would really help. One, the holes on my template were correct, but there's only one small reversible template. It's a good idea to make a duplicate of the template using two pieces of regular printer paper taped together. Both those templates to the assembled wing, and put it on top of the trunk in the desired position. Measure from every angle possible to get the spoiler exactly where you want it. Then grab a few additional pieces of paper and bridge the gap between the two templates and tape everything together. Now you will be able to lay a full-sized single template all the way across the trunk like he did. Don't separate the sides, because you could get your holes just a little bit misaligned. With the entire template in place, measure again from all of the holes to the corners of the trunk and the front and the back to make sure that everything is exactly symmetrical. Now take a tiny drill bit and drill your initial guide holes. Additionally, you may want to go buy a hole saw to attach to your drill bit. One of the holes has an access hole underneath and you can easily put your ratchet extension in there. But the other hole you are going to need to make yourself. In the video, he did this with a 5/8 inch drill bit, and it got a little messy. Same thing happened to me. Instead, I used a hole saw bit attachment for my drill, some WD-40 to lube the metal while I was Drilling, and it cut a very nice clean hole. Makes it much easier to access from the bottom. $15 at Lowe's. Works great! Otherwise, great video! That helps a lot! Thanks!

I love this video! No lame overly loud dumb music in the background. No immature slang, or holding your fist over your mouth saying “damn”! Just basic no nonsense install video. Great job!!

Thank you for doing this video! I received a spoiler with no template at all and was wondering how I'm going to create my own. I had the idea just like you and glad to see it worked for you. Now onto making my template just like you did. Thanks!!

This is the best how to for this on RU-vid man! Where did you get the adhesive from, a hardware store or online? Or it came with the wing?

I know this was years ago but definitely the video I needed. I got my wrx and now it’s time for the wing. Thanks so much!

gonna do this to my 2013 at some point. adds so much character

im planning to get this www.ikonmotorsports.com/2015-2019-subaru-impreza-4-door-wrx-sti-style-rear-trunk-spoiler-abs.html how was the fitment? bad fitment or perfect? please lemme know. Thank you so much.

Some days I wish I bought that color WRX but I love mine.

This is done so professionally Beautiful work done

Great video and super helpful! Question, how was the quality and how has it been holding up since this video? Is it secured all the way/any wobbling? Thinking about ordering one!

Really nice man. I've been waiting to see how this turned out for you.

Thanks for the video! I’m about to do this install.. it’s scary the template didn’t match the spoiler.. I wouldn’t have thought to check that! I will make sure to check my template! The spoiler looks sick!

I like the way it came out. I have the same car and color and was thinking about putting on a spoiler. Thanks for the video

i just got the new static wing from victorracing for subaru and ur vid helped quite alot tnx

awesome video! thanks for the tool layout.

Hey mate, doesn't look like you used a deleter to cover the removal of the OEM wrx wing. Did you previously remove it and fill/spray the boot? The deleters are fine, but yours looks a lot nicer!

Right here you got me beat my boy cause you are drilling holes! Don’t know if I am ready for that. Going to need a 6 pack of big boy juice! Lol

hey mate, looks really good. How is the quality tho? I can see it on the website now for like $226 painted. So I'm wondering about the quality. The price is kinda cheap. Does it stick to your trunk like an OEM one or you can see imperfections? Thanks, -E

Hey can u put a link from where u got it from

How did you locate the holes? Would have been useful of you showed us that part.

Did you take the stock lip spoiler off? And do you need anything to prevent the wing from hitting the back windshield or is it fine?

#HeyBoo👋🏾 great tutorial I will use this vid when I put mine together in a few weeks. Just ordered it an hour ago 🙌🏾

Going to install this today after watching this video, Mine didn’t come with a template at all, so I can use masking tape or paper, To install the wing by myself, I’m gonna tape it down with double sided tape so it stays in place. I might make a video too

At 6:14 how did you go about transferring the drill holes exactly? You removed the two separate templates, placed them at the base of the wing and carefully marked them? Afterwards reattached the two templates back onto the trunk in the same exact position as prior?

Now you need to swap your torsion bars to the sti ones or else you will damage your trunk over time.

Are you skeptical on the 4 bolts holding it to your trunk? I feel like they are not quite enough to hold it on doing 80 on the freeway

Love the park bench

Hey it might be great to see how your template relates to the existing template, the new holes will be offset so that's all you need to know is the offsets.

Did your car come with WRX spoiler lip? If so, what did you have to do to remove it? Were there any bolts involved or was it all adhesive?

How has the spoiler been for you?! Any issues with paint? And any cracks in the wing itself?

Hey bud, question! When you ordered the wing off of IKON MotorSports, How much was the wing total with it painted, i was seeing like two prices, and how long did it take for the wing to come in from the time of purchase? Also in a comment below someone had asked about torsion bars for the trunk if you use it frequently what is that exactly

Great stuff on here man awesome channel will be subscribing!

Looks Good man 👍🏼 Great job!! dropped a like and sub

I just bought a spoiler from them, should I expect my template not to line up too?

Ordered one of these from a similar company. Only issue is the bolts they provided were way to small. What size bolts did you use for mounting the spoiler to the trunk?

NICE!!! CONGRATS!!!!!!

Could of used original templates by remarking them with proper spacing..or paper strips that are lightly taped to wing over hole and then after getting the spoiler where you want, taping the strips down. - I use to install spoilers and bodykits for a custom shop during college.

Do you know what screws you used when you installed into the trunk? I bought a spoiler but didn’t come with any screws so im looking into what id need.

Any updates for the wing? Paint fading? Is the sturdiness holding up?

Nice Video man! May I ask where you get this spoiler?

HOw's the weight of this, did you have to get STi torsion bars? How much are they

They gave the wrong template? That's so dirty. Great video thought bro, I'll be getting my wing this week and doing the install this weekend.

I think you may have skipped the part where you determine where the new holes should be on your new template.

I bought the same spoiler and ikon said they dont give templates. And gave me no adhesive. So now i have no way to drill it

Might not get a reply , but how did you get rid of the small spoiler on your WRX prior to the STi wing install?

Does this work on the 2018 wrx or do I need a trunk swap? Thanks in advance for reply.

Thank you! Very well made video

Looks great man!

So I was looking into ikon Motorsports the wing I want is a pearl white but the problem I’m having is it has a lot o mixed reviews about the paint job and how it’s in even can anyone tell me if the purchase is good for those who own this wing .

How did you get your spoiler from shaking while driving??? I got my spoiler from subiespeed but the spoiler only comes with two screws on each side.

Hey as a heads up. there's an extra i in spoiler in your title.

I know this is super old lol, but the template probably didn’t match cause it was designed to match up with wrx’s with the lip on trunk

only 2 tiny screws on each end holding massive spoiler? I believe OEM spoiler is hold by 4 screws on each end.

I wonder if it possible to do on a 2017 Ford Focus se. the body is actually similar to the Subaru wrx and I see a few done so but hard to tell if it was a 2017 Ford.

Looks awesome man!! I cant decide between the sti wing or a stupidly huge wing lol.

That wing tho 💪

Great Vid! Will deff be using this once I install my spoiler.

Great guide! best one on youtube. Do you live in Fairfield, CA?

did u install the sti spoiler on the wrx trunk or u need to get the sti trunk to install the sti wing?

Great content on your channel thanks for sharing

My template says start iwth 9mm, but doesn't tell you what the final drill bit size is, every video uses two bits, do you know what drill bits I need?

Hey can you link the spoiler? Also how is it holding up?

Can you use RTV for the spoiler base gasket?

Where did you get the trunk without the tiny lip spoiler?

did the drilling template come with the packaging or did u get it from somewhere else?

What did you do with the 4 holes that come from the WRX lip?? Or did you trunk swap

Great job!

Looks clean bro 💯

Hello bro i am from malaysia....can we install it on toyota vios 1st generation ncp42...tq

Bro. The one and only thing I wanted to see is how you marked out the holes… didn’t even show us that

Did you have to change your deck lid springs?

Hey man i just subbed to your channel did you order this through their website or did you go on ebay?

CAN YOU POST A LINK TO THIS KIT?

Did your spoiler came with the template and hardware

How were you able to drill so easily?

Did you take off your deck lid spoiler? Or did your trunk not have one?

What’s this spoiler called on ikon Motorsports??

They failed to send those gaskets with my kit, do you remember how thick they were?

Did your bolt covers come painted? I got the same ikon wing in white pearl and they came black

Two thumbs up!

So the car didn't comes with a wrx low profile spoiler lip ???😕

could you please scan your template and send it to me by mail, since I have the spoiler but not the template and did not find it in any store, thanks

What’s the link to buy this wing???

Did the roll of gasket stuff come with kit

Did the diagram come with the wing?

2mm Gap? did you mean 20mm? or maybe 2cm?

Hey how did you get the stock spoiler off? Like the little lip?

Good job

How much did the sti wing cost

you bought an aftermarket spoiler and they gave you a template for the oem spoiler

What’s the drill size

hey man i have a question can i use that to my 2013 ford focus se? tnx

I put one on my t.C. 2016. Looks cool. Yes I know Its not a rear wheel drive car. BUT. I don't give a shit.

U took the bottom off it did not come ready to drill wtf lol

Where did you buy the drill template????

How much was the kit to do this?

What drill bit was used?

HI where's buy this wing?

Hows the wing holding up so far?