INSTALLING THE NEW SEA SWIVEL For The New Rhodan Spot Lock GPS Anchor - Game Changer!!!

Подписаться 11 тыс.

Просмотров 7 тыс.

50% 1

INSTALLING THE NEW SEA SWIVEL For The New Rhodan Spot Lock- Game Changer!!!
The Bottom Fish better look out! I just got a Rhodan Spot Lock GPS anchor system. I chose the Sea Swivel Over the Minn Kota , Shuttle Slide, and Other mounting systems because it was designed for boats like mine with double or big anchor locker lids. The Seaswivel rotates out of the way so you can still access these hatches with no issues.
Go check them out at seaswivel.com
Hope you like the video and leave a comment if you have one of these mounts!

Развлечения

Опубликовано:

2 фев 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 41

@rolandgarcia9140 17 дней назад

Great video. Exactly what I was looking to get. Sold me on it. Any video on the install of the wiring, charger and battery for the Rhodan?

@JackedUpFishing 17 дней назад

No I didn’t do wiring video as it’s pretty typical for all. I love the Seaswivel though.

@SamMartinez65 4 месяца назад

Great install video. You've sold me. I am putting a Sea Swivel on my Sportsman 282TE .

@JackedUpFishing 4 месяца назад

Awesome!

@dannfish 4 месяца назад

Very nice work. Thanks for posting.

@JackedUpFishing 4 месяца назад

🙏 thank you

@insideout6888 3 месяца назад

Looks great man! If you put the painters tape over where you’re drilling your holes it’ll help the gel coat from chipping!

@JackedUpFishing 3 месяца назад

Thx 🙏 for the tip

@rikwilliams4132 29 дней назад

Excellent job 😊

@JackedUpFishing 29 дней назад

🙏 thank you

@markb571 4 месяца назад

Clean install! Vital piece of hardware for some applications.

@JackedUpFishing 4 месяца назад

💯

@lisaandgregpolandphotograp1239 4 месяца назад

I just mounted a sea swivel on my 25 Contender Bay Boat and it's a game changer! You will never use your anchor again.

@JackedUpFishing 4 месяца назад

That’s what I am hoping! Thanks for watching!

@mattt5276 3 месяца назад

Love the install man super helpful. When mounting the quick release bracket to the sea swivel top plate, did you cut off the protruding bolts underneath or did you buy new hardware so it could clear?

@JackedUpFishing 3 месяца назад

I measured and got the exact size I needed. Have been using it a lot and it’s awesome

@paulbutter1317 2 месяца назад

Great video was extremely helpful. Thanks , it's the only mount that works for my 24-foot sea chaser. How much torque did you apply

@JackedUpFishing 2 месяца назад

I tightened it to where it was stiff but not too tight. It’s really snug

@gregjacobson2687 2 месяца назад

Great info thanks for the video...just got my Sea Swivel to install on my 230CC Finseeker!!! How big is the hole for the main bolt, need to make sure i have the correct size bit.

@JackedUpFishing 2 месяца назад

I am not sure it has been a while. Also if you see on my install video I didn’t drill the hole I used a previous rod holder hole. I’m sure it’s in the instructions though

@gregjacobson2687 2 месяца назад

@@JackedUpFishing i saw that and it was a great idea! Also a great video of the install...

@OutcastLive-vi3pi Месяц назад

I’m surprised that it doesn’t come with mounting hardware

@JackedUpFishing Месяц назад

It does now.

@Mikesalas1989 4 месяца назад

Man it looks really good but I ain’t gonna like the whole shaft looks really flimsy idk if cuz it’s so long….but it has to be on a boat ur size it just looks like it would flex bad when full powered but then again I don’t have one and don’t know just my opinion I hope it works flawlessly cuz I really like ur channel let’s see it in action!

@JackedUpFishing 4 месяца назад

There are bigger boats using them so I am sure it will be fine. Fingers crossed 🤞

@SamMartinez65 4 месяца назад

That shaft is specifically designed to be flexible under load. That reduces the stress point on the mounts. I have a 96" shaft that flexes a good bit as well. Works as intended. No issues. Best accessory on my boat. Instant spot lock even in sporty seas. I have not dropped an anchor once since I got it.

@rohawaha Месяц назад

Thank you for the video , from a 30 year Marine Rigger , please never use 5200 on the top fiberglass surfaces of your boat. It will always come back to bite you in the ass.

@JackedUpFishing Месяц назад

They actually have products to remove 5200 now. Works pretty good. And you can’t argue the effectiveness of 5200 vs other products. I only used on the bolt holes so shouldn’t be an issue.

@doug2202 3 месяца назад

With the motor mounted that far back from center line do you find that the motor uses more battery power to hold spot lock

@JackedUpFishing 3 месяца назад

No it seems to work just like it is in the center. I was worried about that as well. But it’s awesome held my 37 in honest 3-4 the other day

@doug2202 3 месяца назад

@@JackedUpFishing Awesome thanks for the reply. Love the channel. What AH battery and how many hours did you get the other day?

@mattt5276 4 месяца назад

So the kit didn’t come with hardware to mount the four corner holes for the bottom plate? Why would they overlook that

@JackedUpFishing 4 месяца назад

No I would imagine because where it is mounted could be different on each application. But I did mention including the 1/2 inch Allen wrench because nobody had one locally.

@SeaSwivelMount 3 месяца назад

We started adding it to all the kits. His was one of the very 1st ones.

@1957cajun 2 месяца назад

Pretty cool but looks to me like another more complicated thing to corrode, cease up and go wrong. I hope it works for many years for you but I doubt it will.

@JackedUpFishing 2 месяца назад

Only time willl tell. But either way the materials that this mount is made of I am sure it will outlast the trolling motor spot lock.

@1957cajun 2 месяца назад

@@JackedUpFishing I just don’t see how you stop water, salt and dirt from building up between those plates and in and around the bearing. It doesn’t matter what the materials are made of it’s going to bind up unless there is something there to prevent contamination that I can’t see in this video. But good luck!

@JackedUpFishing 2 месяца назад

@@1957cajun only time will tell. That’s all I can say. I will stand by the previous statement though. I am positive it will outlast the spot lock.

@befmx31 3 месяца назад

Great idea but 1000.00 for that mount? Come on.

@JackedUpFishing 3 месяца назад

Yeah it’s pricey but best mount for my Seahunter hands down.

@gregjacobson2687 2 месяца назад

This is honestly the only mount that will be able to work on my 2022 230CC Finseeker...There is not much room up front unless i get a huge plate which would hang over the side quite a bit and i did not want that. I will gladly pay the price for a product that will allow me to have a trolling motor on my boat that is super easy to use.