Installing Torch Down Rubber Roof over an existing Rubber Roof? 

أول مرة أرى عمل متقن ومضمون ودقيق 100/100، بحكم تجربتي في هذا الميدان وجب عليا أن أكن لكم كل الإحترام والتقدير للمجهودات والإخلاص في العمل وشكرا على تواضعكم

At first I didn’t know what to think about you but after watching your work I gotta say YOU MADE A BELIEVER OUTTA ME! My hat goes off to you and your wife I enjoy watching all of your videos

Very well explained video. To the point!

Love the relationship you guys all have. Awesome to see.

Nice meeting you today! She dose a great torching.

Thanks for your videos. Very helpful.

Awesome I’m so proud of you guys love team you are champions

This was a great video. Very informative

You are the best nice work

Very good job looks very good

fantastic instruction. thx

Coming out good

You guys are amazing. We have a flat rubber membrane roof now which is square pieces tarred down which almost look like rubber mats and it's been liquid coated over a few times and flaking so it does NOT look like what you have here. Can we just torch that rolled roofing shingle over it like you did ? Thanks.

Awesome video ..What kind of roof cover would I used for bathroom exhaust fan?

This guy can torch to EPDM amazing just amazing I’ll tell you a thing or 2 🔥🔥🤣🤣

It might not pass code in some states here these days but I know this was the way roofing was done many years ago. My grandfather took part in roofing jobs like these in the 80’s & many of the houses he did some 30 odd years ago still have those same torched down roofs. I had even learned from one of my uncles some years ago when I was much younger. Now a days though it’s not as easy to still do this without someone reporting you :/

Leak city lmaoo Keep going ull learn how to be a torch MAN one day lol

I use your videos for training purposes

Wow she got the perfect bleed at the end!

We use Stanley hook blades for torch on , couldn't use a straight blade

i could do better details with a military grade flame thrower.

Karnak is surprising. . I used spray primer. It always seemed a better seal.

Hey at 14 minutes and 47 seconds you started to heat the torch line. What was that for?

So this is over another torchdown roof but what if your existing roof was epdm rubber could you torch straight over it or would you need the fiberglass base sheet

I hope me and my son can work like this one day. Of the computer world doesn't take him from me. Which is ok. If it does. I supporting 100%, As long as he is not stealing or hurting people

Hello, can we torch down the rubber roof on the existing garage metal roof? Thank you.

Wow very good job sweetheart 😘❤️

Dude you are getting hot spots.

Awesome. Family business. Everyone is working and no complaining. Good Mexican wife 😀

Is this not bitumen torch down felt? Since when do we melt rubber? Rubber is usually glued down in the uk

I have the old tar and gravel roof, is there any new ways to replace the tar and gravel roofs, or should i just do spot tar repairs when the Leak comes.

Speaking of not removing roofs I’m gunna tie in a flat roof to a 10/12 pitch roof should I torch straight to shingles or remove shingles and roll it under the shingles??

No primer onto new torchdown?? (Referring to patches and pipe detail)

The Bob Ross of roofers. ....

Hoy en día se USA asphalt primer de asfalto sobre el metal

Why is the corner cutting a better than straight corners. And after how many layers can you use a previous roof ?

you seem like such a nice guy, i would love to meet you.

What if the old torch down roof has silver seal on it. Will the new torch down still adhere to it?

What would a roll of this felt cost to buy and how long would they be in metres?! In uk a decent sbs roll 8m is £50

Why do the granules always seem to come off the roof within 5 yrs. At the 5 yr mark, we always have to silver coat b/c too much of the tar is exposed to UV

can you install the torch down rubber roof over an EPDM roof?

Secondly in a recover installation every major roofing manufacturer will require you remove all base flashings, edge metals prior to the recover in order to get a manufacturers warrant. Any roofer who offers you his personal warranty in lieu of a manufactures warranty is a hack.

You primer flashing and then torch over flashing. I have made 20 year roofer made look like rookies.

I notice that you did not clean the substrate before you did the torch down. Why?

make sure you prime the old roof first

Wouldn’t pass an inspection in FL

What if the existing roof has a lot of ponding water

Why do you round the corners?

i would like to know if you've ever accidently caught a family member on fire? that would be terrifying

can rubber roof be installed on shingle roof?

Why that colour felt it hideous

u need to solvent prime that old membrane first

First of all the doctor says don’t ever remove the old asphalt roof! Never leave wet roofing components in place when you reroof a bldg. Wet insulation left in place will rot wood and steel deck. This guy is a hack. One more scenario what if the existing roof did not meet. Wind uplift criteria as specified by local BOCA code. This guy does not take into account any agency requirements including OSHA safety requirements.

You would not last a full day as a roofer in any dutch roofing company , this for shure is not on a profesional level in the usa.

Bitumen will not stick to rubber

Roof doctor loves the latina spice!!! Hot hot hot

Kyle Koverola RU-vid channel. My son got moms Gene's.

He wants to be a carpenter so bad

Biggest shoemaker I've ever seen. If you worked for any company I've ever worked for in Canada and I've worked for the biggest company in North America Flynn Canada. You would only be allowed to torch once and you wouldn't even be allowed to finish you first roll. You would be lucky if they allowed you to cut cap sheet. I know you said in a previous video that there is a right way to do this but you would show us the way you do it and that tha manufacturer wants it done a certain way but you won't do it that way. I guess there are no standards in the US. Everything you do is over burned you never use gussets you make rabbit ears both ways on your flashing which is wrong. Rabbit ear only go on you first peace the second peace should be cut flush with the wall box parapet and patch on cap sheet is not a 6" by 6" peace you put over a hole it has to look natural the length of the cap sheet 39.50" wide and you cut off the 3" lap and 3' both ways of the hole making it 6 feet long. Putting down a diamond shaped piece over a roof pipe is when you add a roof pipe to an existing roof after the fact with a cone over the pipe. Any existing pipes already on the roof are supposed to look natural you pass the cone 6" cut the roll there and start another piece of roll touching the pipe with the 6" over lap. You have never done or been to the manufacturer torching course.

First of all a roofer with a flat blade is not a roofers.

"that's detailing" is that what you are calling it. What an absolute state. Those pipe details will be leaking within a year.

🍀☘️🌟⭐🌟⭐⭐👍

You’re doing it all wrong. Haha

Your pipe flashing is wrong!

Who thumbs down this??? Jelly?? May look rough, but it not gonna leak

your doing a retro fit but not using base ? you do realize that the base it whats the actual waterproofing membrane and cap is just to prevent it from UV rays from the sun. certainly not how we do it in Canada

I saw u hurt urself with a burn, I had to re watch 3 times to see how. Fingers put in hot.spot!!!. I've done it before. You delt with that like a man. Ahahhsshishhh. Rub off fast, but slow

Just the people don't nothing about roofing said good job but thing is evrething u doing is wrong sorry Dr come to Florida to do ur job Next day u Fire 👎👎👎👎

Sorry guys but that's a mess you doing there.

So many things wrong in the application of the product in this video. Hey doctor if you are going to do a video at least do it right. No priming of the granular surface before torching a target. Really. One more thing in a recover of a compatible asphalt roof, asphalt primer should be applied in order to achieve a clean surface to attach too. So many things wrong in this video. Plus where is your warning flags doc?

HACK

i like it but you guys are messy not a very clean looking roof..

did you go look at the videos I told you to look at, of a real.roof ? not that burnt up shit you install ?

))) bad job, lol