Great accurate information. Video moves quickly between settings often without a clear explanation of how these setting are structured - often with author thumb in the way. Use the pause feature on Utube to find these places and make the suggested change. Still, a great video. Thank you.
I agree this is good - but I do hate when someone doesn't show a true greenfield setup - they skip steps because they were already set up before the recording.
It can, but the more I used it the more frustrated I got with it. I think the virtual sound card was giving me issues. I would have to reset everything a few times before it would work.
I'm working on getting it running on my Fedora 38 VM. As you know, it wouldn't be Linux without a sea of unresolved dependencies 😆. I'm keeping notes, and I'll share steps and results with the community if I succeed. 73 de KN6NPZ Daryl
I tripled checked every radio and computer setting shown is this video and still no connection. The radio is connected to the WiFi but the computer will not connect to the radio. What am I missing? Frustrating!! T 8:25 the author says go to "enable control" and then clicks on the "External control" then says set to Com 20 and enable it but no explanation of how to enable it. When the "connect to radio" is pushed in the video, a message appears at the bottom of the screen saying "radio found ...etc). I am not getting that message. Any ideas???
I did all this and functionality works with WST-X via Wfview over WLAN. But, in TX, the TX audio is pulsating up and down in level, and is a bit noisy. Does anyone have an idea why and how to fix it?
I believe I had the same issue. when you TX the audio would cut in and out. I ended up switching to another virtual sound card. It wasn't free, but it resolved my issue. vac.muzychenko.net/en/index.htm
👍👍 followed this video and it works flawlessly! THANK YOU! Helpful? comment. I would have gained by seeing you setup all your preset values and not just WLAN. BTW, I peeked thru your fingers to get most of them. Again, great and helpful video.
Tom - Thank you for the video this morning. I followed the instructions and still came up empty. I sent you an email to your address on QRZ. If you get a chance can you look it over to see what I might be doing wrong? I'm on a mission to get this working so I can eliminate computer noise once and for all out in the field doing POTA/SOTA. 73 Scott.
I didn't set "network control (valid after restart)" to "on". Tom calls this option "internet access after restart" and I think that's why my brain ignored it.
Can someone write down all the steps for radio and computer one by one? In every video I watch, I see something that was said incompletely in the previous video, but I still could not establish a connection between the radio and the computer.
Thanks for the tip on how to get TX audio back if it drops out when clicking on TUNE (wfview disconnect/connect and changing audio input/output sources). I had been having that problem and your method solves it for me.
