For more details you can see this article: www.robotique.tech/robotics/i...
An intelligent water filling system controlled by Arduino can be a great way to automate the process of filling water in a tank or reservoir. The system can be designed to monitor the water level in the tank and automatically fill it when the level goes below a certain threshold.
Here are the basic steps involved in building an intelligent water filling system controlled by Arduino:
1- Materials: You will need an Arduino board, a water level sensor, a solenoid valve, a power supply, and connecting wires.
2- Connect the water level sensor to the Arduino board. The sensor can be placed inside the tank and will send data to the Arduino about the current water level.
3- Connect the solenoid valve to the Arduino board. This valve will be used to control the flow of water into the tank. When the water level goes below a certain threshold, the Arduino will send a signal to the solenoid valve to open and allow water to flow in.
4- Write the code for the Arduino. The code will use the data from the water level sensor to determine when the water level is low and needs to be refilled. When the water level is low, the Arduino will send a signal to the solenoid valve to open and allow water to flow in. Once the water level reaches the desired level, the Arduino will send a signal to the solenoid valve to close.
5- Test the system. Fill the tank with water and test the system to make sure it works properly. You can do this by manually lowering the water level and verifying that the system refills the tank automatically.
6- Install the system. Once you are satisfied that the system works correctly, you can install it in the tank or reservoir where it will be used.
An intelligent water filling system controlled by Arduino can save time and effort by automating the process of filling water in a tank or reservoir. It can be used in a variety of applications, such as in agriculture, aquaculture, or in a household water supply system.
2 апр 2022
