Your silence speaks volumes lol. Very educational video. Straight to the point not like other videos I see people who ramble on about irrelevant crap. Thanks 👍
Thank you so much. We were gifted the same pool in like new condition. No instructions so I couldn't figure out what that extra piece was for. Going to add it in the morning and see if the pump works properly.
Thank you for your comment.. Achieving a higher water quality and during hot periods helps to help a good water quality in your pool. Always keep your pool clean with chlorine and watch your PH value. After signe oxygen supply should help you to use less chemicals in your pool. However, this is not documented. But if nothing else, it makes the water very soft and comfortable.
Do I open the valve like loosen it a little bit when I’m running my sand pump or do I leave it closed idk what the valve is used for lol I’m new to pools
I want to thank you so much for your advice I was so upset and discouraged when the pump came in the mail and the pice wouldn’t fit in the hole it’s all about money for these companies but you have to be creative and innovative on keep from getting ripped off thank you from New York
Omg you're video just saved my ars lol VERY frustrated viewer here and YOUR video was the ONLY 1 I effin had to watch!!! of course I didn't watch it 1st which sucks but hey THANK YOU SO MUCH!!!!
Sir, the small black plug is not for that return hole. It is to put over the air inlet for stopping aeration when you want it to act as a normal jet. The 2 big plugs you have that come with the pool are the correct ones for return and inlet and they go under that big cap that screws of. Hope this helped somebody just like your video, and sorry for my poor english btw
Thanks for your comment, you write an excellent and understandable English. I was not aware that the plug could also be used to stop air supply. When I received the kit, the plug was in the outlet nozzle. I show this method, rather than using the black plugs that come with the pool. I thought the plugs easily fall out. Thank you for your help and comment.
Thank you, mine was in the nozzle as wel straight out of the box. But i have seen a couple of official intex pictures where it was on the air intake so that is how i know 😁 not an expert but i stumble upon it
Thank you for this information I did this before your tutorial and the whole thing come off and drained half my pool while I was out! That clamp is not so clear in the instruction manual 😭😭😭😭
Nice vid to start. Question for you or anyone watching this video. Will this work for a 22' x 52" pool with a 75D Game sand filter & pump. The pump is a 3/4 hp.
Tak Morten, was scratching my head about how to fit this, got it fitted now. I don't have all those air bubbles coming out of mine though, do I need to do something else to get those coming through? I just have the jet, no difference than without fitting the air adapter.
duffymoony Try opening the air valve a little bit more to allow more air to come in. The whole concept of the outer peace is so that way that additional top screw which is what gives air
Hello, at this moment in Argentina it is summer and luckily I found your video explaining exactly what I needed, thank you very much.But ......... I have a problem, I have an element of one body, let's say a "mouthpiece" for giving it a name. Obviously it is not of the upper connection that you just showed. Therefore I ask you a favor, if you can show how the parts of the lower connection are mounted, since I have left over this "mouthpiece". Showing how the lower connection elements are connected is sufficient, since this "nozzle" does not fit anywhere. Thank you.
Hola, si es por cómo van las piezas fijate que podés descargar el manual de usuario. Me regalaron uno de estos pero no sé si servirá para piscina de cemento
Gracias x como conectarlo lo q no entendí en el funcionamiento de la perilla si va cerrado o abierto cual es la diferencia xq de las 2 formas veo igual el caudal de agua gracias x mostrar saludos desde argentina
la valvula que va hacia arriba (la pieza cilindrica que enrrosco ala pieza grande) es la que provee de aire ala piscina. ahora si te referis al tapon negro, es solo para no regar agua al retirar la manguera y conectar el aereador. Saludos de Nicaragua!!!
Do you have any idea if this kit will work on Krystal Clear pump 330 GPH?? i've been looking for this kit on amazon and cant find it. Cheers From a Nicaraguen!!!
Hi and thanks for your question. The set here fits Intex filter pumps with 32 mm hose connection. I have used the set together with a Sandfilter pump with a capacity of 15,000 liters per. hour. I bought sets here for 300ghp: www.eurotoys.dk/product/Pool_Inlet_Air_Nozzle_Set_For_300Gph_Pum_Intex_Reservedele_12351.asp?site=76&vn=101-012351 og her for 500ghp: www.eurotoys.dk/product/Pool_Inlet_Air_Nozzle_Set_For_500Gph_Pum_Intex_Reservedele_12352.asp?site=76&vn=101-012352
@@Knights4ever83 I’m in the same boat trying to make this work with a different sort of pool. I think the black part is part of the pool wall itself. Would be helpful to find something to make the pieces fit snugly in the side of a pool not made by intex/without holes pre-made.
Achieving a higher water quality and during hot periods helps to help a good water quality in your pool. Always keep your pool clean with chlorine and watch your PH value. After signe oxygen supply should help you to use less chemicals in your pool. However, this is not documented.
I've got exact same pool. I thought the inlet strainer that you pulled out from inside pool is glued or stuck to pool❓I'm concerned it will rip a big hole if I pull it out❓Mine seems to be molded to pool, however I may be wrong.
@@MortenWork Ok finally got my pool packed away for winter. I was able to just pull out strainers and replace with new system easily. I did find out that black plug is only used to stop the water flow during assembly. Other then that you don't need it. Thanks for great video
Do you know if the screens are supposed to suck in the water with pressure, my pump works but both the screens feel like they aren’t sucking any water in??
if u take out the 'screens' and put ur finger in the whole u will fill it is sucking...if u have a small pool , 8 ft, try just one 'screen' and close the other one. I'm guessing with screen you mean the suction holes? thanks
I´m sorry, what is the function of the adapter? What is it for? I bought a new pump and in the instructions this adapter is like an optional, I don´t now if i should try it or not. Thanks!
You can add more oxygen to your pool with this adapter. On 38 mm intex bats and connection, they are today standard. Gives a more comfortable and soft water jet at your exit to the pool.
dear friend, congratulations for the video and thanks for this! I live in Brazil and here we do not have this product for adaptation. Could you tell me some place where I can buy via the internet and get it in the mail? God Bless America (Brazilian Hugs)
Achieving a higher water quality and during hot periods helps to help a good water quality in your pool. Always keep your pool clean with chlorine and watch your PH value. After signe oxygen supply should help you to use less chemicals in your pool. However, this is not documented.
Im missing some piece that connects the two. I tried just connecting the air adaptor and the piece inside the pool and it leaks. is there some type of gasket i need
You do not need a gasket between the two pieces, but a plastic clamp that comes with the Air Adapter set. Plus clamps where you connect the water hose.
You add more oxygen to the water and, according to the manufacturer's instructions, save on chemicals. A bit the same if you use oxygen tabs in your pool.
@@MortenWork Mine used to work, and now after taking it out a few times to clean the pump is not giving me bubbles no more..is it some sort of pressure that it lost from the rubbers?? cus its all clamped up and all..maybe the pump got weaker? im not sure..anyone? thanks
I have the same pool i have all the stuff that you showed on the video but the jet or whatever the name is doesn't go all the way i push hard enough but the part that goes inside the pool is not flush i guess the part that goes inside its too long..
Help...I'm unclear what this adapter does..❓.do I need it❓it came with the new pump...but my pool is smaller...being used more like a hot tub..350gal..thx
@@MortenWork just wanted to know if I really needed the adapter...guess not...overkill for a smaller pool or hot tub...thx...that's black cap thingy is cute tho, huh ❓👍
Just bought the Intex 10 X 30” pool with filter. Filter runs but does not pump into the pool. When running no water in the pump, shut it off and it fills with water and comes out the air valve when opened. Any ideas?
Hello the pump is marked with a plus and a minus! Plus is water into the pump. Minus is water out of the pump. At minus you mount the Intex Air Adapter, so bubbles will come in the water.
Morten Work it worked for about an hour. We shut it off while in the pool then tuned it back on. Pump runs but when you turn air valve no water comes out. Shut the pump off turn the air valve and water is in it. You can see water trying to move to the outlet when it is turned on but nothing happening. We have unhooked all the hoses changed the filter and same thing. Faulty pump?
Mine used to work, and now after taking it out a few times to clean the pump is not giving me bubbles no more..is it some sort of presure? cus its all clamped up and all..maybe the pump got weaker? im not sure..anyone? thanks
Many pumps become weak over time. Clogging of filter and hose .... the possibilities are many. I even use Sand filter as it is the best in my opinion. Paper filter pumps stop quickly and require almost daily cleaning during hot periods when the pool is used a lot.
@@MortenWork thank you for that information! :) Actually I figure it out! If you overfill the pool even just a little bit over "the line", it seems there is too much water pressure for the bubbles to generate.
WTH is the additional white piece that is named air intake that seems to have no purpose? Can I send you a pic because intex doesn't seem to ever answer the phone. 🙄
You can do as you please. Watch my second video on how to disconnect the Intex Air Adapter here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-C2j91AcPadE.html
Good video, but theres no need for you to put that clamp on the outside of the air adapter, its hard plastic is not helping on anything there, other than that, good info.
Achieving a higher water quality and during hot periods helps to help a good water quality in your pool. Always keep your pool clean with chlorine and watch your PH value. After signe oxygen supply should help you to use less chemicals in your pool. However, this is not documented. But if nothing else, it makes the water very soft and comfortable.
Morten Work when I take the black plug off mine the psi rises to the yellow&green line just a tad. What can I do to use my air adapter without raising psi. Or is what I’m seeing normal?
