Intex Auto Pool Cleaner 

I have the exact same setup from pool to sand filter to skimmer and cleaner! This was the PERFECT tutorial. Thanks for making!

Bro! All the reviews on Amazon are full of people who said this vacuum doesn’t work! It’s cause they have it connected to the wrong end of the pump! Vacuums usually suck, so I get why they’re confused but your video helped me a lot bro.

Thank you so much Frank the tank!!! Directions in the booklet are sketchy but your video showed me I did same thing. Now it’s moving around the bottom like a champ!

Tha ks for the info. I bought this earlier today and saw your video. Getting Friday. I am excited!

Your Pool Water Is Super Clean 👏🏽 Awesome - Thanks

Very helpful video!! Saved us from returning it!! Thanks so much!!

I wish I'd seen this video when you uploaded it. They're over $105 now. Might still get one. Thanks for sharing.

greal Job... please note that you can cut your hose to the size of your pool.

I made the same mistake. now is working thank you.

Thank you so much! My husband made the same mistake you made. So I found you on RU-vid and told him what you told me! It's working thanks to you!

I almost returned this your video help😊 a lot. Thanks so much!!

Great video! I bought this for $50 on Amazon and had to learn a few things that were not in the instruction sheet. I use it on a Bestway 18X16 oval pool with an upgraded INTEX 2500GPH Clear FLow filter pump and an INTEXT surface skimmer. May I offer a few pointers? 1. You don't have to remove any air pockets from the hoses since it uses positive induction (water blowing out from the pump return (A). My manual hand held-on-a-pole vacuum connects to either intakes (B) and it needs to be bled of air for it to work well. This one doesn't. 2. You gotta make sure that there is nothing on the bottom of the pool that could stop it from freely rolling about. I dropped a pool cover clip and it got stuck trying to roll over it. 3. If you use a non-sand filter pump you really want to bleed the air from the pump to ensure that they outflow operates at full pressure. 4. When you use it drop the vacuum as far as possible from the out take to ensure that it cleans as much of the pool as possible. 5. If you are using in a BESTWAY pool do not use the filter insert that comes with the out-take adapter. It doesn't fit. If you try the hose will fly off or the water pressure will not be enough to activate the vacuum. Remove this inner filter (you wont need it as the water exiting the pump is already filtered). Once removed the adapter/coupler fits tightly and the vacuum works. If you have two intakes, open both unless you are also using a surface skimmer. 6. Never try to lift the vacuum out of the pool by pulling on the hose. Its not strong enough and could rupture the hosing. 7. When installing the hose onto the outake (return to pool A) do not connect the hose before you screw in the coupler/adapter and make sure that the pump is off. 8. Clean the vacuum's filter after each use and remove from pool. Don't leave it there for days. 9. Although you are warned that it doesn't clean Algae, I've learned that it actually does an awesome job at cleaning it once you've shocked the pool to kill the bloom. 10. Enjoy, I've never regretted purchasing this product.

I have had my Intex Auto Pool Cleaner for about 4 months and the hose keeps tearing on the pool cleaner side. It tears right where the hose comes out of the plastic piece that screws into the pool cleaner. Have to pull out and rethread into the plastic piece that screws into the cleaner. Any ideas on why it's doing this?

I’m so glad I found this. I was connect to B also

I ordered the intex 1200 gph(4500 l/hr) krystal clear pump with the plan to order the Intex auto pool cleaner later on but saw that the auto pool cleaner requires a 1600 GPH and bigger, will the 1200gph be strong enough ?

Quick question for you. Did you backwash your sand filter before running the vacuum? That’s what the instructions say to do so I’m just curious whether I can skip that part. Great job on the video!

You said $57 dollars! I seen that price about the time you released this video. I wish I would of bought one then. Just ordered one yesterday. The cheapest I found was $109.

Frank I think your video is awesome! We must have assembled ours the same day but I would have loved to be able to watch your video. Our filter worked well at first but it isn’t working now. Not enough pressure. I took the filter apart and found some of the sand was a little gunky. Could that be it? Then we stripped the screw trying to return the clamp to the filter. Any idea where to buy parts for Intex?

Great!!

I'm planning to use this on my bestway pool, Is the connector the same with intex pool? or you have to hook up an adaptor?

I CANNOT get that aerator piece off ! Is there a trick to it?

Can you show how you connect it to A while it's in the pool attached? I'm trying but it keeps leaking out so afraid I'm doing it wrong .

I have sams style pool and just got Same vacuum it doesn't want to clean one end of pool even though it reaches it won't stay over there..

Question...I have an bestway pool and this vacuum. It won't hook up right. Any idea which adapter I need? The plate on the inside wall is too big for the vacuum hose so it won't attach. Help!

Any idea if this unit will still work with a smaller pump of 4000 liters or 1056 gallons?

I love you tube. Thank you

I just bought a pool with the 1200gph sand filter that you showed in your filter upgrade video. I've been looking at the Intex pool cleaner but it says that the minimum water pressure needed is 1600gph - i.e. the next model up. is it really working OK from the 1200gph filter pump?

I love the video and it has helped me but I do have a question and I maybe doing something wrong. When I go to pull the vacuum out of the pool it drains out some of the debris that was just vacuumed. Is there a trick to getting out of pool ?

My white hose disconnected from its adapter now I can’t get it back on tight…any suggestions

Please help…. I have 2 intakes, one has a skimmer on it. And one output …. So I use one of the intakes on the split intake hose? Great video!

what size pool do you have? & do you have any negative issues with it? I have the older model for that intex vacuum.

Where did you get that threaded water return that’s connected to the pool side that you connected the auto cleaner to?

How does it work for algae?

Still don’t know how you attach it to B I can’t find any videos showing this part :(

Hi Dear, I got same intex auto skimmer, but noway to connect to poor, where I can find the adapter connect between pool and skimmer ?

Please how can I know the exact way to install this

Are you sure that valve came with the vacuum, because I didnt see you pull it out of the box and I just ordered the vac and it didnt come in my box either

I brought one and I have cleaned it and change the values after watching the video and it is still not working.

I can’t connect the hose adapter e wise the micro screen is too high up

im having problems trying to connect the hose to "A" outlet. please help

My best way has a different type of water outflow and isn’t have the screw to take off. Anyone have this issue an a fix?

How do you get that top off of part A to screw it on?

Where did you buy the extra hose at?

Where did you get the extension hose?

Does this actually work? Like how long would it take to clean a 12ft pool floor with a pump like yours?

what do you mean blowing out the air, my pool dosent blow out any air, is it attached to vac or discharge of the filter

Does it hook up to intake or outtakes

Do I put the filter on filter or backwash

Hi...what does the sandfilter have to be on to go?

I'm confused with product?. It connects to the outlet that shoots the already filtered water. When the vacuum runs does it shoot out the filtered water from the bottom? Or do we vacuum .. Then remove it and keep the water pump running to shoot out the filtered water?

i SEE YOU HAVE NOT GIVEN AN ANSWER ON HOW YOU TAKE OFF THE INSIDE CAP TO PUT THE PUMP CAP ON FOR THE CLEANER. MINE IS SUBMERGED AND I CAN'T GET IT OFF WITHOUT WATER GOING EVERYWHERE AS THE WATER LEVEL IS ABOVE THAT INTERIOR CAP. SORRY FOR THE CAPS....

Anyone else use this on a pool that’s NOT intex. Wondering because the eye connection for a regular pool doesn’t fit the cleaner attachment

What pump are you running ?

How on earth did you connect it to A?!?! Everything I see shows B and I can’t find a way to do A

where do you buy it?

My Vaccum never moving.

Mine did not come with the attachment to the pool inlet anyone know what that part is called so I can find one

Did you have any problems with cats?? A neighbour demanding us to cover our intex pool all the time when not in use because of her cat going to our property... if i will buy this vacuum i can't clean and close the pool at the same time right? 🤣

ערב טוב יש לי רובוט כמוך בעיה לא עובד..?

why do you keep saying blowing air out???