Materials Needed:
- A box made of basswood
- A self sticking stencil design
- A felt tipped marker
- A blow dryer
- A fine wire brush
- A lazy susan
- A pencil
Tools Needed
- A chip carving knife
Steps for Chip Carving a Small Recipe Box
Step 1
Set the Stencil Mark a center point on your box with a horizontal and vertical line on your box. Take the stencil and line it properly with the center and adhere it.
Step 2
Mark Your Cuts Use a felt tip marker to designate areas on your pattern where you want to cut.
Step 3
Make Your Cuts Take the knife so the blade is in front of your thumb. Cutting towards yourself, insert a vertical cut into the wood. As you push the blade, lay the knife underneath your chip. Cut both sides of the chip and lift the loosened chip from the cut with the broadside of the blade. Practice cutting on a scrap piece of wood to become more comfortable before advancing to your larger piece of work.
Step 4
Remove the Stencil Take a blow dryer and warm the top of the stencil so it begins to separate from your work. Use a fine wire brush to remove it completely.
Step 5
Erase Your Marks Use a piece of fine grit finishing sandpaper to erase any pencil marks on the wood.
Step 6
Stain the Box Use any kind of finish you desire on your recipe box to complete your new Old World family heirloom.
MORE FROM YOUR NEW HOUSE
The Great Outdoors with Joe Sherinski:
• The Great Outdoors
Featured videos:
• YNH Featured Videos
Great DIY Projects from Your New House:
• DIY - Do It Yourself w...
Quick Tips - easy tips to make your projects (and life) better:
• Quick Tips - Great, ye...
Gardening and Landscaping:
• Gardening and Landscaping
Adventures in Homebuilding - Home info with a smile:
• Adventures in Homebuil...
Choosing and Using Tools with Carmen Ciricillo:
• Choosing and Using Too...
Factory Tours and Product Testing:
• Did You Know?
Al Carrell - The Super Handyman:
• THE Super Handyman
30 июн 2024
