Wow super clean build bro I have been looking for a video like this for a while I'm trying to do the same thing currently running a 15" Incriminator Audio Tyrant rated for 5K RMS but I am new to anything more than the daily driver setup I've got my electrical up to par running SCIB charging at 15.8 and the sub with an AAK 6k BUT I'm saving for the second sub now and I want to put at least 15k on them but I don't know what size to make the box for cone control they are basically the same sub so your box specs should work perfectly for me can you please tell me what size box and aero port your currently running and how is it working for you
@@SlamryCamry19 my original box was 6.1 cubes and sounded incredible. The rebuild is 5cubes. It’s not as aggressive on the lows like the bigger box. I thought cone control was the cause of the distcap blowing off but it was just defective from the factory. But DC recommends 3.25 per sub so it didn’t hurt much shrinking. Not sure what yours recommend
@@mistaalmighty2147 they don't have TS parameters on the website and I can't get any from Incriminator audio but I did get them to tell me that the sub has a FS of 24HZ and they recommend a ported enclosure around 4.0 cubic feet with approximately 80 inches of port area the D4S enclosure I'm currently running is 4.0 cubic feet after displacement tuned to 32hz and it's doing great but I plan on putting it on more power and would I need 160 inches of port area for 2 or just the 8.0 cubes and 80 don't know much about building boxes