Introducing OpenIPC Mario AIO

Подписаться 7 тыс.

Просмотров 12 тыс.

50% 1

This is the introduction video of the OpenIPC Mario AIO.
If you want please join my channel to get access to exclusive posts and updates on the upcoming OpenIPC goggles:
/ @mariofpv
Small correction: explanation port=explasion port😅 (sorry)
OpenIPC latency test:
www.facebook.c...
• OpenIPC Latency Test a...
There will be more videos on this amazing open source camera that can encode up to 1080p 120fps h265 so make sure to subscribe.
OpenIPC FPV is the cheapest digital FPV system in the world!
Thanks to the WFB-ng link it has some serious long range capabilities.
Read more here: openipc.org/
You will find everything you need to start your own project!🎉
The system supports MAVLINK bidirectional telemetry which makes it a complete solution for a quadcopter or fixed wing/VTOL. It also has WFB-ng link preinstalled and this means it has serious long range capabilities.(up to 100+km!)
More OpenIPC cameras will be in following videos so make sure you subscribe to not miss them!❤️
Please feel free to join our fast growing community:
t.me/EZWBC
You can also join our official OpenIPC facebook group:
/ 956912811789726
Buy this camera:
store.openipc....
Massive thanks to Kenny Plus for his creation!👏
Music:
John Tasoulas - The Dead" is under a Creative Commons (CC-BY 3.0) license
/johntasoulas
Music promoted by BreakingCopyright: bit.ly/bc-the-...
EDM Detection Mode by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommon...
Source: incompetech.com...
Artist: incompetech.com/

Опубликовано:

15 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 156

@STRIZH_FPV Месяц назад

This is incredible progress!!! 2 things I would think about if I were you: 1. Add a pressure plate for ipex connectors so that they do not accidentally fall out. 2. Install a low-profile fan

@mariofpv Месяц назад

Totally agree on both! For the first one a 3D-print will be available soon by the community and for the second one I’m already searching for a smaller passive heatsink on Aliexpress. Cheers mate!😊🍻

@MrD0od Месяц назад

You will be famous! As will the OpenIPC team! This has made DJI OBSOLETE, I have held off digital for years, not to feed them a single cent. Now, you can make an entire quad copter with GPL licensed code. Using the AM32 ESC firmware and this! Great job! And Thank you for this!

@mariofpv Месяц назад

That exactly was our goal when we first started this project! Welcome to our open community. Cheers mate!😊🍻

@christophertelford Месяц назад

The explanation port will be very useful when I get stuck and don't know what I'm doing.

@mariofpv Месяц назад

After 4 shifts in a row I entered home and found the Mario AIO. I had to create a video in the next 5-6 hours without knowing anything about the camera lol! I saw the whole video only once before I upload it, so that bloody auto-keyboard of my iPhone messed it up! I wanted to type “expansion port” lol! Cheers mate!😊🍻

@christophertelford Месяц назад

@@mariofpv Don't worry it's a great video and I look forward to receiving mine and having a go myself. I don't think the small typo will cause anyone any problems I just thought it was funny.

@mariofpv Месяц назад

@christophertelford cheers mate!

@FlyingKebab_FPV Месяц назад

Its not about the video, but about the aio❤

@Royskooner Месяц назад

You and the OpenIPC team have done incredible work, Mario! Now that anyone can just get an AIO, I think a significant barrier has been removed from adoption. A FOSS video link, can really change things like ELRS did with control links!

@mariofpv Месяц назад

Thank you for your kind words. Cheers mate!😊🍻

@aracrg Месяц назад

Hot daayyyyyum this is looking good!!! Well done. Very interested to see some output from the onboard recorder.

@mariofpv Месяц назад

Coming soon. There are so many new features to cover. To be continued… Cheers mate!😊🍻

@zoey101dogwablog Месяц назад

That USB-C cable is worth it alone! Beautiful kit!

@mariofpv Месяц назад

Cheers mate!😊🍻

@gouuu6046 Месяц назад

Awesome congratulations !

@mariofpv Месяц назад

Cheers mate!😊🍻

@ChaddRainsFPV Месяц назад

Hey dude, this is starting to look good! Hoping to see these available soon!

@mariofpv Месяц назад

It’s already available for preorder. The 1st batch is gone in a few hours! This is the 2nd batch we are gathering preorders and it’s bigger than the 1st one. You better hurry if you want to reserve one Mario AIO. Cheers mate!😊🍻

@fpvlive Месяц назад

You guys came a long way since the first model, but that big honking cooling fan is unfortunate..

@mariofpv Месяц назад

This is the best and most advanced open source FPV hardware so far. I also think that the heatsink is too big so just remove it or use a smaller one. Cheers mate!😊🍻

@aracrg Месяц назад

I think the fan will be optional if the heatsink is exposed to airflow, ie. while you're flying. Maybe Mario can do some thermal tests for us.

@nic.h Месяц назад

@@aracrg Including idling time

@TheVeganarchism Месяц назад

I thought the cooling fan is great - maybe not for a drone but for a surface vehicle or something where there isn’t enough air flow to cool but you still want digital.

@mariofpv Месяц назад

The cooling fan is only for the internal WiFi module. If you use an external WiFi module you can remove completely the heatsink.

@narpat007 Месяц назад

Wow, excellent manufacturing quality !

@mariofpv Месяц назад

Thank you for the support my friend!😊🙏

@narpat007 28 дней назад

@@mariofpv you are welcome my friend😊

@fanatic_joka Месяц назад

Great Work! Thank you for never giving up. What kind of range would you expect on like a long range setup?

@mariofpv Месяц назад

Depending on the antennas you have on the ground station you can reach more than 100km. The output TX power is 32dbm max. That’s more than 1200mWatts! Cheers mate!😊🍻

@FlyingKebab_FPV Месяц назад

Wow, thats progress. A huge progress🎉 Can you please put this in 5" FREESTYLE drone, and do some video with it? It would be amazing to show world that open ipc is like avatar now.❤❤❤

@FlyingKebab_FPV Месяц назад

There are some videos with open ipc freestyle, but its just dvr and they didnt say anythink about it, somethink like comparisom... And they are just small channels, somethink like me😂 with dvr😂

@mariofpv Месяц назад

No because I’m not a pro freestyle pilot. You’ll have to watch the videos of Greg. Cheers mate!😊🍻

@kennyplus-qq3pj Месяц назад

Great Mario, love Your videos!

@mariofpv Месяц назад

You have changed the FPV hobby for ever my friend with your amazing creations! Well done and thank you for everything!😊🤝👏🙏

@danieldewindt3919 Месяц назад

What about latency? I'm orienting to buy digital fpv in the future. What goggles are compatible? Please tell some more. It looks awsome 😎

@mariofpv Месяц назад

30-35ms glass to glass but we are working to drop it further down. Link in the video description. Any goggles with HDMI in port will work. Cheers mate!😊🍻

@ramchandyalamanchili8258 Месяц назад

May I know if this can be used without heatsink and fan in a whoop style quad?

@mariofpv Месяц назад

Yes but you need to set it to minimum power mode and take off relatively fast after you plug the battery. Cheers mate!😊🍻

@CineBlaBla00 Месяц назад

So cool! Is there a way to use custom camera instead of those little module, like something that have an hdmi port ? It would open so muche possibilities if it's possible

@mariofpv Месяц назад

We don’t support these kind of cameras. For that you can use the WFB-ng firmware which is tested on cameras with HDMI out port and works great. Cheers mate!😊🍻

@MohammadAdib Месяц назад

Output power?

@mariofpv Месяц назад

github.com/OpenIPC/wiki/blob/master/en/fpv-openipc-aio-mario.md Cheers mate!😊🍻

@reznichenkoo Месяц назад

Around 1.2w

@TroyRank Месяц назад

Yussssssss!

@puneethff4927 Месяц назад

its good to see brother , how about latency and is there any way we can get video feed on the goggles ? other than hdmi option , directly ? or else are launching any specific goggles for them ??

@mariofpv Месяц назад

The latency is 25-35ms depending on which goggles you use. I have already posted a video search in the community section. I am using HDO goggles with the VRX, I have a video link in the moment I turn on the VRX. Check it out. We are developing OpenIPC goggles but I can’t release any more information. Other FPV companies are also working on their goggles. Cheers mate!😊🍻

@puneethff4927 Месяц назад

@@mariofpv ook it's great to here about it Thanks for replying brother 😁

@istvansoos1055 29 дней назад

Dear Mario! What air side wifi adapter has the highest power for long range and working without overheating on a 2 hours flight? I have a plan to fly 80 km far with 5 turn helical on the plane pointing to the ground station. Wezly could do 100 km with analog 5.8, do you think it would also possible with Openipc? Thx!

@mariofpv 29 дней назад

We already did 106km with WFB link. OpenIPC is using the same video/telemetry link. Cheers mate!😊🍻

@shoofly Месяц назад

Saw a VRX you guys had, any plans you sell one in your shop for our goggles/monitors? Would love to see this system used with some XReal glasses at 120hz!

@mariofpv Месяц назад

That VRX you saw is sold and manufactured by Radxa so we can’t resell it without have an agreement with them first. Cheers mate!😊🍻

@olivier2480 Месяц назад

awesome, great job man !

@mariofpv Месяц назад

Cheers mate!😊🍻

@fekix222 Месяц назад

Excellent work mario!

@mariofpv Месяц назад

Cheers mate!😊🍻

@an_R_key Месяц назад

Congratulations, Mario!!!

@mariofpv Месяц назад

Cheers mate!😊🍻

@sullytrny 28 дней назад

It's a hobby, be thankful...

@mariofpv 28 дней назад

The whole OpenIPC development team is thankful for having this HUGE support from the community! It’s beyond our dreams! Cheers mate!😊🍻

@berkakarcaloglu1915 Месяц назад

Looks pretty high quality. Is there any estimations on the price, or any rough estimates you could give us maybe? Also even tho I feel like I got the general idea (assuming lower pcb in the stack is for rf stuff i.e. wifi card and top pcb in the stack for SoC etc.) I think a sort of "tare down" would be a cool video. Finally a small side note, I have a trouble regarding the telegram group is there anyone you could forward me to to resolve it by any chance ':D Anyways sorry for the long comment, great work keep it up and good luck in all of this, cheers.

@mariofpv Месяц назад

There’s a link to buy it in the video description. Cheers mate!😊🍻

@berkakarcaloglu1915 Месяц назад

Will check the link out. Is there any way you could lead me to someone who could help with my problem with the telegram group? sorry if that's rude of me to ask 😅

@mariofpv Месяц назад

I’m on Telegram. Send me a message @Mario_FPV 😊

@RICHEEDXV Месяц назад

Congrats bro!🥳

@mariofpv Месяц назад

Cheers mate!😊🍻

@wva5089 Месяц назад

This looks awesome. how necessary is the fan? I'd like to try tiny whooping it..

@mariofpv Месяц назад

If you set it on the minimum TX power and take off relatively quickly after you plug the battery you may remove the heatsink completely. Cheers mate!😊🍻

@mattyd_gaming7425 Месяц назад

Might be worth to ditch the usb c cable. Almost everyone has it and cohld decreasy production and retail price of the set, making it more accessible!

@mariofpv Месяц назад

As an iPhone user I never had one that long lol. I only had one small from my GoPro🤣. Cheers mate!😊🍻

@nitro2electric799 Месяц назад

Great work on this! I am thinking of switching from my analog setup on my fixed wing fleet. I have an Eachine LCD monitor I connect to my transmitter. Is there an equivalent setup to receive signal from this rig? BTW - I did setup OpenHD and had it running a while ago, but found it too bulky for use.

@mariofpv Месяц назад

If the LCD monitor has HDMI in port then it will work fine. For ground station you have many options. Join out Telegram to give you more ideas. Cheers mate!😊🍻

@isokemisoke 23 дня назад

Hey brother, I need to process video we captured while it is being sent over wifi. I will use it for feature like follow me and furthermore. What do you suggest me?

@siscusjr4266 Месяц назад

Awesome ! But the fan is so huge , is this aio fit to drone ? Because seems the fan take to much space, replace to heatsink seems better. And please provide another socket cable from vtx to fc so no need soldering in fc side. Good job man!

@mariofpv Месяц назад

You can replace the heatsink although it fit perfectly in a 5” quadcopter. I have tested it today. Cables that you mentioned are already sold in the market. Cheers mate!😊🍻

@GauravMehta-p8r 27 дней назад

Just pre ordered this kit Mario. Which ground side wifi adapter can I use with it. I have alfa AWUS036ACH and a laptop?

@mariofpv 27 дней назад

Yes you can use them as a ground station. These are the only hardware you need. Cheers mate!😊🍻

@GauravMehta-p8r 27 дней назад

@@mariofpv Thanks, What kind of range you can expect with AWUS036ACH & any reference for antennas which are better than stock antennas on AWUS036ACH

@flyingdutchmanfpv Месяц назад

Do you have a good suggestion for which radio module to use with the Radxa 3W? 200Mw 1W 2W? Which type do you use?

@mariofpv Месяц назад

For long range I use AWUS036ACH but the ASUS AC56 is also a good option. Both are excellent receivers. You could use smaller receivers for short range or RTL8812eu modules. Cheers mate!😊🍻

@flyingdutchmanfpv Месяц назад

@@mariofpv Thanks Mario, I'll look into those options. Just ordered your AIO a few days ago... hoping it will arrive soon ;-)

@nutzername3995 28 дней назад

Is there a Firmware Option that allows to reduce the output Power to make it Legal in the EU?

@mariofpv 28 дней назад

Yes when you set it to 1 value the output power is only 25mW. Cheers mate!😊🍻

@ZipovUA Месяц назад

Hi Mario, thanks for your great work. Could you please explain me, if I want to use OpenIPC, that as I understand uses wifi and in the same time I want to use raspberry pi for executing complicated navigation scenarios - could they work somehow by the same wifi connection? in other words how to make openIPC connection for video and raspberry pi for remote control/navigation at the same time (if I want to execute scenarios via pymavlink or mavSDK or MSP?)

@mariofpv 29 дней назад

I’m not sure how to do this. Sorry mate. You need an engineer to develop this specific project for you. Cheers!😊🍻

@abc321meins Месяц назад

Lol, this vid got recommended to me by the algorithm while browsing RU-vid at 2am. I've no clue on what I'm looking at. I guess it’s a cam for an fpv drone? What is so special about this cam and why is it called mario? I'm so confused. I don’t even own an fpv drone... Guess it’s time to go to bed. But I have to say: it looks pretty neat!

@nic.h Месяц назад

It's an open alternative to digital FPV systems. Mario is this channel owner and has been instrumental in the development of this package.

@mariofpv Месяц назад

Welcome to our community! There are a lot to read in our wiki about our open source project and I believe it’s always exciting to learn new things. In a few words my mate already explained it but if you want to read more click github.com/OpenIPC/wiki and join our Faceboook and Telegram groups. Cheers mate!😊🍻

@abc321meins Месяц назад

Thanks guys! Here we go, down the rabbit hole

@ArchonLicht 16 дней назад

Why did you SSH into it if you configure everything via OpenIPC configurator?

@mariofpv 16 дней назад

Just to demonstrate that both options are available. Cheers mate!😊🍻

@ArchonLicht День назад

@@mariofpv Gotcha, thanks!

@ramchandyalamanchili8258 Месяц назад

Version 2 can have just solder pads instead of that big pin connector?

@mariofpv Месяц назад

We decided to not have pads like every other FPV system in the market. Cheers mate!😊🍻

@jcugnoni Месяц назад

Amazing module. Will try to preorder one !!

@mariofpv Месяц назад

Cheers mate!😊🍻

@WFB-ng Месяц назад

Excellent Mario !

@mariofpv Месяц назад

Thank you for all the support my friend!😊🙏

@WFB-ng Месяц назад

@@mariofpv welcome my friend ☺

@ArshaansEdits Месяц назад

Awesome development man! is there any possibility that I can buy any of these? or get my hands on it?

@mariofpv Месяц назад

Yes the link is in the video description. Cheers mate!😊🍻

@ArshaansEdits Месяц назад

@@mariofpv Got it thanks! Will the nvr board vrx work with this as well?

@mariofpv Месяц назад

Yes of course but only 60fps since the NVR can’t do 120fps (yet😉) due to hardware limitations

@brunofporto Месяц назад

What do I use as a VRX?

@mariofpv Месяц назад

I’ve put a link in the video when I turned on the OpenIPC VRX. Check it out. Cheers mate!😊🍻

@nic.h Месяц назад

7:36 Radxa Zero 3W

@pintony057 28 дней назад

Hi, what glasses does it work with?

@mariofpv 28 дней назад

Check the link in the end of this video. I have already posted a video about VRX and compatible goggles. Cheers mate!😊🍻

@someaning1 Месяц назад

I am curious about how you would mount the board to your drone?

@mariofpv Месяц назад

The diagram of the mounting holes is already in our wiki. By using the holes of the heatsink. Very simple and smart solution. Cheers mate!😊🍻

@Jackpkmn Месяц назад

Dang how many layers are total in that stack like 15, 20? That is a crazy PCB stack.

@mariofpv Месяц назад

This is a premium product much better than our first one! I haven’t included all the details because they are so many! For example there’s an IMU onboard for real time image stabilisation! More videos coming soon. Cheers mate!😊🍻

@Jackpkmn Месяц назад

@@mariofpv God damn that sounds like an assload of engineering focused down onto such a tiny point. That is cool.

@民科C彭 26 дней назад

朋友，可以更改摄像头吗，热成像摄像头，接口图像最好是hdmi这样兼容性就高了

@DaytonaJim78 Месяц назад

How could we receive this in googles

@mariofpv Месяц назад

If the goggles have HDMI in port then you can use them. I linked a video that shows how. Find the link on this video in the moment I turn in the VRX. Cheers mate!😊🍻

@mrelashvili Месяц назад

Fantastic, estomated in stock time?

@mariofpv Месяц назад

We are already gathering pre-orders for the 2nd batch. The 1st batch was sold out in the first few hours. We are expecting some buyers to receive their Mario AIO in the following days. Cheers mate!😊🍻

@mrelashvili Месяц назад

@@mariofpv Wow, amazing. So if I order now - I will get it in the few days? What is your email for sales?

@mariofpv Месяц назад

Please contact Igor on Telegram for direct assistance. It’s the easiest and quickest method.

@mrelashvili 29 дней назад

@@mariofpv What is Igor's telegram handle?

@mariofpv 29 дней назад

@Flyrouter

@g3rm422 Месяц назад

u r awesome

@mariofpv Месяц назад

Cheers mate!😊🍻

@MikeCarr07 Месяц назад

Custom OSD? 😀

@mariofpv Месяц назад

It’s on my github repo all my personal modifications. I haven’t updated to have mp4 recorder though so check the changes in the history section. Thank you for everything my friend!😊🙏

@MikeCarr07 Месяц назад

@@mariofpv Also looking forward to MSP integration!!

@mariofpv Месяц назад

I think it’s going to be a game changer because it is easy to configure directly from the BF/INAV configurator!

@MikeCarr07 Месяц назад

@@mariofpv Totally agree! I wish I had more knowledge of the FC code and had done a little C/C++ programming in the last 20 years :-)

@Chimavideo Месяц назад

Very nice stack

@mariofpv Месяц назад

Cheers mate!😊🍻

@RADE_HEHO Месяц назад

What VRX do i need to receive the signal ?

@mariofpv Месяц назад

I’ve put a link in the video when I turned on the OpenIPC VRX. Check it out. Cheers mate!😊🍻

@nic.h Месяц назад

7:36 Radxa Zero 3W

@mysterb_33-13 Месяц назад

Can I buy one?! Just got into wings a year or so ago, if this range is real...well

@mariofpv Месяц назад

Yes you can preorder one. Link in the video description. Join our Telegram channel to watch the video proof done by one FPV pilot. I can’t post it here because it’s illegal and I want to keep my YT channel lol. Cheers mate!😊🍻

@CaptainCandycorn Месяц назад

Where do I buy it though

@mariofpv Месяц назад

Check out the video description for the online store link. Cheers mate!😊🍻

@АндрійБорбунов Месяц назад

Mario, is it possible to buy only VTX? If not - want to request such an opportunity

@mariofpv Месяц назад

This video is about the VTX. Find the link to buy it in the video description. Cheers mate!😊🍻

@АндрійБорбунов Месяц назад

@@mariofpv Yeah, but it comes already with camera, it would be cool to have an option to buy VTX without a camera

@mariofpv Месяц назад

Ahhhhh that’s what you meant. Sorry I misunderstood. You can buy any rtl8812au or rtl8812eu module on Aliexpress.

@SkermiebroTech 26 дней назад

can it run doom?

@mariofpv 26 дней назад

It can run GTA6 lol! Cheers mate!😊🍻

@gadgetman404 Месяц назад

So when you buy this you have to set it up why not configured already from factory would be easier for newbies to use all this setting up you not talking not explaining what todo will put alot of new pilots off me for one😂

@mariofpv Месяц назад

No need to do the drone.key step. You can just use the default key on both Radxa Zero 3w and the Mario AIO. It’s very straightforward. I just wanted to show that you can use your private keys for extra security if anyone needs. Cheers mate!😊🍻

@mikenomatter Месяц назад

Why not place the FC connector and the camera connector on the same side? It would be more convenient for connecting on the quadcopters, as the VTX is usually located behind the FC and the camera is at the front.

@mariofpv Месяц назад

Because there’s no room for both MIPI and the FC connector in only one side of the board. That’s why we included a much longer cable for the MIPI camera so that it will easily reach any quadcopter frame. Cheers mate!😊🍻

@mikenomatter Месяц назад

@@mariofpv Such location of these connectors will eliminate the "wrapping" of wires around the unit, making assembly much neater - you really should think about this for future designs. Great job anyway!