Hello there, will it work with the DELPHI head unit? This unit is sold by brazilian VW as OEM radio, does not work with CAN, only with the 11th pin of the ISO switch and supports MEMO+, MEMO-, VOL+, VOL-, TRACK+, TRACK-, SOURCE and PHONE over the steering wheel.
Is it necessary to hook up the reverse and brake wire? Also, I am hooking up a Chinese JOYING head unit and don't know whether the 8th dipswitch should be on or off. The instructions only include Pioneer and Sony regarding the 8th switch.
Hey Fabio, To help with the set up, contact our tech department through support.connects2.com/tickets/technical and one of our technicians will get in contact with you, C2
Handbrake wire is needed if the stereo requires handbrake to be engaged in order to change settings etc Reverse wire is needed if the stereo is connected to a reverse camera, to know when to switch to that video output. Otherwise no, HB wire can just be grounded and it thinks your handbrake is always engaged,
I have a 2005 Skoda Octavia 2 with the factory fitted 'premium' sound package which consists of the Audience head unit, the Lear Corp. amplifier under the passenger seat and 12 speakers (2 speakers + 1 tweeter for each door). A few days ago, I swapped out the stock HU for a Chinese android unit, but I am not getting any sound from my speakers. After a lot of searching on the internet, got to know that only the stock head units (and some compatible aftermarket headunits) are able to communicate with the stock amplifier. This was disappointing as I quite like the sound of the stock amp+speakers and was hoping to use it with my new HU. Any way to make the amplifier work with the new HU Here is a picture of my amplifier for reference (I am guessing this is the same Dynaudio amp that comes on VW models) so i understand that i must buy canbus som can give an order to the amp at work with i am wonderinng if you have this CANBUS i see that on the interneet that your canbus are work it fine thises why i ask you before i buy it my car info skoda octavia 2005 orginal ampilfier is with sound premium everthink is work fine just the amp cant switch on and conditioncant see on the android multimedia stereo If I am unable to use the stock amp, what kind of amp should I be looking at getting (power, how many channels etc). Sorry if the question seems vague, but I haven't got a clue about car audio stuff All suggestions are appreciated!
Contact our tech team via: support.connects2.com/tickets/technical/ Our team can be contacted via email or phone during the following opening hours: Mon-Thu: 9am to 5:30pm Fri : 9am to 5pm C2
Hey Lars, Yes this should work with a Chinese head unit, you will have to configure the CTMULTILEAD.2 patchlead correctly (which i believe is the Key1/2 and GND) for it to be compatible C2
