Introducing XRS74YG - CAA AK Rail System 

How's it holding up?

Did you just have to cut the sling loop on the left side rail? If so, anything else?

@@oneounceslugAPEX No, the sling loop is fine. I had to file back the front of the lower rail 1/8th of an inch. I had to re-contour the top rail just a small amount, where it contacts the receiver. After that, it was awesome. No power tools, just hand file to fit. Took a couple of hours.

@@jupiterjunk awesome! Thank you for the response!

@Kev looks like I'm buying a dremel lol. My gf3 is having a hell of a time accepting this thing

@@oneounceslugAPEX One thing I forgot... The front retainer sits on a raised lip, you'll see it when you look at the rail straight on. That lip does need to be filed as well. . Remove the screws from the front and rear retainers. CAUTION there is a spring underneath. Use a Sharpy to coat an area, on the rail and try fitting it to the rifle. You'll see where the Sharpie is removed. Start there. . Go slowly with the Dremel, and use as fine a grit as you can. REMEMBER: You can remove material, but you can't add it back. .

Tell me more about it, i would like to install it on my Arsenal as well.

It was ground off and a left side chargeing handle was installed.

Apologies for our slow follow up. The answer is that it will not fit. Sorry. We are available for any additional questions at support@israeldefemsestore.com