Excellent demos and information.... Thank you very much... Please if possible, make another video abt "communication between 2 mobile stations" means what information our module can gather from neighbouring mobile stations.... Thanks again, gr8 work keep up✌🏼
I want to know if it is possible to communicate in the opposite direction. I want to call the SIM mobile number from a PC, to connect with the modem in order to use AT commands to get information from the modem about it's GPS (lat / long). Is this possible? The onboard modem is programmed to receive SMS coded texts.
Hi Edwin, Thanks a lot for your comment. With our SMS console, the customer can send SMS commands to the device. docs.emnify.com/portal/sms#open-the-sms-console docs.emnify.com/apn-configuration/gps-trackers#sms-console-teltonika In the example above, we send an SMS command “setparam 2001:em” to a device which triggers AT commands on the device to set the APN. Each device will have its own command set, of course. Note: the default source is the name “emnify” but some devices can only respond to a numeric source, so if a response is expected, it is often better to use a short number like “12345” as the source.
DEAR Sir I would like to know wether AT commands can be written in PIC assembly language via ASCII commands to help pic microcontroller communicate with simcom 300 2G/3G modem, thanks
9:07 Didn't get "RDY', after Powered Down... What can i do now, i checked sim is working fine in my phone. but the insertion report still "Not Inserted".