Involuter? I barely know her!

Подписаться 417 тыс.

Просмотров 465 тыс.

50% 1

To try everything Brilliant has to offer-free-for a full 30 days, visit brilliant.org/Inheritance/ . You’ll also get 20% off an annual premium subscription.
This video was sponsored by Brilliant
Making gears is something a lot take for granted. Including me. But when you use techniques from 100 years ago, and start from scratch, well... Let's just say this may be the last time you see me this!
Gears and Gear Cutting Book (affiliate link) - amzn.to/3WtS4ep
#inheritancemachining #machineshop #hobbymachinist
Patreon - / inheritancemachining
Drawings Store - inheritancemachining.com/?pro...
Merch - inheritance-machining.mysprea...
Instagram - / inheritancemachining
Amazon Store (affiliate) - www.amazon.com/shop/inheritan...
Thank you again to the Micrometer level Patreon members listed at the end of the video!
TIMESTAMPS
0:00 Special Teeth
3:24 Hold my butt(on)
4:37 Involute-ish
6:04 Getting my grinding fix(ture)
7:58 Math is hard
9:02 We're gonna need some teeth
12:08 If you have the tool... use it!
13:37 Not as bad as it looks
15:38 Comic relief
17:08 Bring your wife to work day!
21:56 Gear Time!
FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
www.epidemicsound.com/track/S...\
• Involuter? I barely kn...
© 2024 Inheritance Machining, LLC. All Rights Reserved.

Наука

Опубликовано:

3 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,2 тыс.

@InheritanceMachining 23 дня назад

To try everything Brilliant has to offer-free-for a full 30 days, visit brilliant.org/Inheritance/ . You’ll also get 20% off an annual premium subscription.

@enetheru 23 дня назад

@Clickspring would probably enjoy this as he's recently done a bunch of videos on this subject

@enetheru 23 дня назад

and by recently I meant a year ago.. sheesh how time flies

@repentnow1720 21 день назад

Groucho Marx would be proud! : )

@TheClumsyFairy 21 день назад

Involuter? Jamaca? Alaska! (just incase this only working in my accent Jamaca = D' make her - Alaska = I'll ask her)

@user-sr2gk2op1u 20 дней назад

Cool!

@pipisugbo 23 дня назад

Your shop is cool, but your wife's enthusiasm for your hobbies and passions is even cooler ❤

@user-oc8yg3bc2q 23 дня назад

His wife is mechanical engineer too. That's the secret 😉

@AndrewKay-fg1bj 23 дня назад

Got to agree, that enthusiasm was awesome!

@MyTubeSVp 23 дня назад

My wife : “were you in that shop again, you reek of metal, go wash up and don’t bring that metal rubbish in my house” …

@FNmey 23 дня назад

@@MyTubeSVp Know that too well ... god help me if there is even a single chip from the lathe in the house ...

@FNmey 23 дня назад

Right? It's incredibly cool!

@Macvombat 23 дня назад

The most impressive thing about this video is that either, A: Wife is genuinely excited about some of these parts or B: Wife is one of the best actors the world has ever seen.

@user-oc8yg3bc2q 23 дня назад

His wife is mechanical engineer too. That's the secret 😉

@Macvombat 23 дня назад

@@user-oc8yg3bc2q That explains a lot!

@Stallnig 23 дня назад

both good options

@IstasPumaNevada 22 дня назад

@@user-oc8yg3bc2q Do they have a channel too? I'd love to see the shenanigans the other side of the household gets up to.

@chrisoakey9841 22 дня назад

And not a mention of your 2 videos actually being a side product.

@Its_Danny- 23 дня назад

You and your wife are so cute! Also loved the "are these the things that were baking in my over for the last 3 days" "yes" 😂

@MikkoRantalainen 22 дня назад

I can see why she's a keeper.

@InheritanceMachining 21 день назад

I fix stuff for her sometimes so it balances out 😁

@The-Caged-King 23 дня назад

17:09 “And you’re lookin like a whooer” 😂

@TeHPHoBoS999 22 дня назад

You know she likes those shorts

@IstasPumaNevada 22 дня назад

I learned that pronunciation from Jon Stewart's pizza rant.

@custos3249 22 дня назад

You mean like 0:35

@KX36 22 дня назад

@@IstasPumaNevada i learned it from Charles Dance in game of thrones

@andrejohnson6731 22 дня назад

@@IstasPumaNevadaSopranos 👍🏻

@AngelOfTheMad 23 дня назад

It always impresses me just how quickly your beard recovers from Henson ads.

@DJkrypton89 23 дня назад

Same it’s insane lol

@joshclark44 23 дня назад

Same

@jimadiah 23 дня назад

Seriously. I'm afraid to cut my beard because it takes 3 months for it to grow long enough to not look like I'm a copper brush. And another month to get to a length that I can trim it the way I like.

@marpheus1 23 дня назад

Mine took like a year to get to where I like it. There's no way I'd shave it for an ad

@BloopTube 23 дня назад

It may just be an old wives tale, but my beard at least grows back quicker after a cut.

@pipisugbo 23 дня назад

I see new Inheritance Machining video, i click It's an involutery reaction

@Not.Your.Business 23 дня назад

this comment rounds up the video nicely

@K0S0s 23 дня назад

Something something involuted reaction

@paulnels108 23 дня назад

An it does not stop until you get relief of the backside!

@Mcneds 22 дня назад

Almost went to make a sarcastic spelling correction then i realized the joke😂

@InheritanceMachining 21 день назад

Nice

@withak30 23 дня назад

Extra credit project: Design a pantagraph that not only scales the text down, but allows it to be etched on an arc of specified radius instead of just in a boring straight line.

@daltontech1613 23 дня назад

I was thinking the very same thing - in theory, a larger arc (or one for each ratio) to install the letters in should accomplish this (and now that my theory is posted to the internet, it has to be true, right?).

@queutaih 22 дня назад

Or a curved mount for the letter blanks

@RNMSC 22 дня назад

Might be a great use of that involute gear cutter that got crossed out, so a side project to drag out all these tools again...

@HappilyHomicidalHooligan 22 дня назад

@@queutaih He's already got one of those... Assuming it fits and isn't too tall, he could use his Milling Machine Radius Cutting Fixture to hold the blanks on the Pantograph table...

@theantipope4354 22 дня назад

Was thinking the exact same thing at that point in the video.

@StrongWoodenDesigns 23 дня назад

I f**King love how you're all serious and professional. Then as soon as you've proven it works you run off a show off to your wife. About the most relatable guy on the internet 😂

@BorealBlizzard 23 дня назад

I love how excited she is about your machining

@Margarinetaylorgrease 23 дня назад

It must be so nice to have a partner that is enthusiastic about what you do, my cat just sits there saying “so?”

@jackpijjin4088 23 дня назад

At least my cat climbs on my workbench and goes "ah? :o" xP

@jeffspaulding9834 22 дня назад

Yeah, but then again your cat won't get angry with you if you decide to screw around in the shop all day and don't help out around the house. Unless the litter box doesn't get cleaned, of course. Then you might get "messages" in your bed.

@InheritanceMachining 21 день назад

that's still impressive

@Margarinetaylorgrease 21 день назад

@@jeffspaulding9834 Oh she gets upset if I’m not In bed at the right time, I get “the look”.

@juhavuorinen3945 19 дней назад

Nice job👍

@KaminKevCrew 23 дня назад

I am overjoyed by your wife’s enthusiasm for your projects. What an amazing person to call your life partner. This was a very fun video to watch.

@InheritanceMachining 21 день назад

She is actually amazing

@TrumpeterOnFire 23 дня назад

Your wife being so excited about the project while you're absolutely bored of the cool design and 200% in "let it just end" mode is adorable. More hoochie daddy shorts. She knew what she was doing.

@cheffrin3751 22 дня назад

He could just add a rotary head onto that table and just use the letters in one spot on the tray. Would be cool to see!

@KnowArt 23 дня назад

at this point you're just showing off (the fact that you're in a happy relationship)! You love to see it

@paulb8264 23 дня назад

I can't believe we didn't get a side project for making arcs on the pantograph

@blkscorpion01 23 дня назад

Your wife's excitement is so amazing and was my fav part. Her sharing in your passion... greatness.

@0xTJ 23 дня назад

That pantograph really does a lot to add a professional touch to these cutters! And remember, always wear the sexiest shorts you can in the shop.

@zinkwis8462 20 дней назад

HSUSHSUSHSHE LOL

@vayamt7626 23 дня назад

Was waiting for these gears to be made! So we can finally see the "new" old lathe getting restored! I hope at least

@kyler-r2424 23 дня назад

i completely forgot that this rabbit hole was to restore the new old lathe

@Grantaes 23 дня назад

@@kyler-r2424 You know this is just a side project.. that is taking over an entire set of videos to simply restore the new old lathe

@LordPhobos6502 23 дня назад

@@GrantaesYou know you're doing it right when your side project has side projects 😂❤

@Chris-te7uk 22 дня назад

I might just have to make this project myself. I also have a "new" old lathe that needs restored, and needs new gears throughout. It's an old Monarch Model A built somewhere around 1919 to 1920 or so, as far as I can narrow it down with the serial numbers. I was planning on just buying the gear cutters, but after watching these last couple videos, it would be so much cooler to build the tool so I can make them myself.

@InheritanceMachining 21 день назад

😉

@ultramarinescommander 23 дня назад

2 minutes in. Production and meme value is insane

@franciscofaraldodini5283 23 дня назад

The relief gear cutter cutter blew my mind. Didn't get how were you going to use till you showed it here and its incredibly clever

@Gottenhimfella 14 дней назад

It looks very much like the valve gear on a steam loco when it pulls out of the station. On of my favourite classes of mechanism.

@joshua_lee732 23 дня назад

I work in a transmission factory and I showed your channel to the machinist that are here, they're all in love with this project as we used literally the same book to design our gear cutters.

@dumbo800 9 дней назад

Ya'll are a transmission shop and you aren't hobbing/shaping/skiving your gears?

@Torta--is--PLUR 23 дня назад

It's 7am PST and I haven't slept yet...another 25 min won't kill me...I think

@Sanjay_JT 23 дня назад

What doesn't kill you makes you stronger? But in all seriousness, please take care.

@FennelWork 23 дня назад

I'm in the exact same boat. Pulling an all-nighter never felt so good

@robgoodsight6216 23 дня назад

😂😂😂

@klausbrinck2137 22 дня назад

Similar here... And I survived, so, best wishes, but still, don´t overdo it... ;-)

@Torta--is--PLUR 22 дня назад

@@Sanjay_JTafter a ridiculous day I just woke up from 10hrs if dead ass out sleep

@masiina2000 23 дня назад

very funny to me how home shops make tools to make tools to make tools, just for the love of it

@southstreetbarbecue7875 23 дня назад

Please keep your wife involved with all your projects. The enthusiasm and humor she brings to the video work very well with your technical knowledge and dry humor.

@Steelcrafted 23 дня назад

I audibly gasped when that cutter blank started climbing over your button cutter! lol 😆

@petedepledge3359 22 дня назад

I instinctively engaged my safety squints😂

@LukeA_55 19 дней назад

I tried to slam the E Stop button 🤣

@BigRigTrig 16 дней назад

We all did 🤣💀

@user-cb9gc5uk5y 23 дня назад

こんにちは。貴方の動画を日本から楽しませてもらっています。貴方の道具や技術にはいつも感心しています。事故や怪我に気をつけて頑張って下さい。

@69Misterpickles 23 дня назад

親指から判断すると、彼は多くの怪我をしています

@Ryan_Thompson 22 дня назад

@@69Misterpickles 少なくとも、彼はまだ親指を持っています!

@user-cb9gc5uk5y 22 дня назад

少なくとも、彼は指の揃った手と技術を持っています。

@Kombivar 23 дня назад

I hope you realised, judging by the comments that your wife is a permanent segment for your videos - Ever since she stopped by to watch your things it added so much colour to this videos. Well done team!

@johnfreiler6017 23 дня назад

Dude, that is awesome: both the machining and the awe of your lovely spouse as she beholds your fantastic machining abilities. Kudos to both of you and indeed, for making gear cutter cutters.

@szymonjastrzebski2909 23 дня назад

There's one very important use case for the No. 1 gear cutter. That's cutting racks. No. 1 covers teeth count from 135 to ∞.

@jakezanders6598 22 дня назад

Could just do that with a V bit, right?

@szymonjastrzebski2909 22 дня назад

@@jakezanders6598 Not exactly a V-bit, but technically doable with a D-bit. But cutting with D-bits is slow and painful

@Gottenhimfella 14 дней назад

@@szymonjastrzebski2909 I think Jake was talking about making the gear cutter, which has straight flanks, so you could use either side of a V tool (whose included angle was equal to the pressure angle of the gear) to machine one side of the gear cutter.

@dumbo800 9 дней назад

@@jakezanders6598basically. But it would be more effective to use a gear shaper or skiver for rack cutting.

@wizkid723 23 дня назад

I like your oopsie misspelling on the chapter, "Bring your Wide to work day" LOL ... And the excitement! Great work!

@JamesTM 23 дня назад

That "squeeze in a lesson" got a juvenile giggle from me. I'm in my late 30s on the outside, but there's always a part of me that's 13 on the inside. 😂

@ShamWerks 22 дня назад

Late 40's here. Trust me, the 13 yo in us is not going anywhere.

@JamesTM 22 дня назад

@@ShamWerksNor would I want it to. My inner child experiences such wonderful joy.

@InheritanceMachining 21 день назад

Aren't we all? 😂

@GilgaFrank 19 дней назад

One of the best parts of these videos is Mrs Inheritance Machining's wildly exuberant reaction to every project (and facial hair variation)

@pauloalvesdesouza7911 23 дня назад

Making a tool to make a tool to make gears, 2 side projects and Ms IM! This has got to be one of the best videos you've made, and the best is that's just one part of an awesome series yet to reach its culmination!

@andrewstorer4875 22 дня назад

And don't forget, that tool was made to make a tool to make a gear, which will (I predict) be a change gear for yet another tool. Dude likes tools, and I can't say I blame him. We all use tools. But there's tools we can use outside of the shop! I want to see him build a coffee grinder. He's always drinking coffee in his videos. If I remember correctly, he's even had coffee company sponsors! Now @InheritanceMachining , wouldn't it be satisfying to drink a cup of coffee who's beans were ground with a high precision machine (capable of producing grounds with a narrow and finely adjustable particle size distribution) that YOU built? Yeah, uhuh, just you sit with that.

@pyrosparkes 23 дня назад

i know everyone says this, but the absolutely adorableness of your interactions with your wife are the best parts of your videos, and i really hope she knows it. you are one lucky man. edit: she is also a really lucky woman, and i hope you know it.

@polyesterdreamboat 23 дня назад

Her enthusiasm and joy is so cute

@DavidParker 21 день назад

I’m not a machinist at all and while I understood what you were working towards I had no idea what the thing you’ve been making to make the relief cuts was and now seeing it working blew my mind it’s so smart and works so well!

@LordPhobos6502 23 дня назад

Ok, that bit where you're showing off your gear cutters to your missers... you two are adorable 😊❤😊❤

@calypsobikes1 23 дня назад

Clickspring has an amazing video on EXACTLY this!

@PiersCawley 23 дня назад

Yup. I love how there's two machinist RU-vidrs making videos about this and, because their storytelling styles are so different, both sets of videos are absolutely worth watching.

@lourias 23 дня назад

... but Clickspring make tiny gears for tiny things, while Inheritance Machining makes the manly stuff, and A-Bomb makes the GIGANTIC stuff.

@calypsobikes1 21 день назад

@@lourias principles apply across scale.

@lourias 21 день назад

@@calypsobikes1 Duh!

@thalivenom4972 20 дней назад

as does thisoldtony.

@GooseGosselin 23 дня назад

All jokes aside, you've really inspired me to begin my machining hobby. Today, I'll take my first tentative steps by donning my hoochie shorts and finally learning how to spell enjuneering.

@alangliniak9514 23 дня назад

Great work as always. I like that your wife seems to generally nerd out on your projects as well.

@tuomaslaine8225 23 дня назад

There's two brilliant channels on RU-vid with penchant for pantograps. This and the the one with pigeons, Uri Tuchman. Love 'em both.

@Kyle_Noonan 23 дня назад

Beautiful work as always my friend. The pantograph was SUCH a classy touch. Seeing your wife be so supportive and excited about your work is awesome! (You owe us some hoochie daddy short shots)

@vincemanley3911 23 дня назад

Man, Truly impressed with your work, I am glad there are smart people out there😅 but seriously, just amazing work, I could loop and watch that gear cutter all day❤

@txstang84 21 день назад

I’m on board with other commenters-I love these videos and scan my feed waiting for whatever new content arrives. But while I’m quietly sitting here watching the process in awe, your darling wife is really enjoying it and clearly getting into it. I’ve been visited by my better half a few times in my shop while working on some old car and she doesn’t usually get too excited until I lay down some paint or finish a project like dropping in a new engine (which she’s helped with a few times in the past). All I’m sayin here is I adore this.

@goptools 23 дня назад

I think that it is very cool that your wife understands and even enjoys engineering concepts! Who would have thought that making a gear was so involved? They look so simple at first glance.

@BloopTube 23 дня назад

if im remembering rightly she is also an engineer but decided to work in something else after a few years

@RNMSC 22 дня назад

As I recall, Chris over at ClickSpring made his own involute cutter, but instead of cutting the relief with a step system like this, simply took the unhardened cutter back to the rotary table, and milled the relief behind the point. That wouldn't relieve the entire curve, but I think his point was that most of the cutting action that needs the relief is in the depth portion of the cutting. All that said, it's probably time to go back and re-view his series of videos on that process....

@ahfreebird 22 дня назад

Making gears is really simple...if you start with an off the shelf cutter and engineered gear train design 😅

@RNMSC 22 дня назад

@@ahfreebird It's even easier if you just buy them at standard sizes that happen to be in stock. They might not do exactly what you want, but that's not important, right? ;-)

@squidikka 22 дня назад

@@RNMSC Or you could just buy the gears that would do exactly what you want. There is no rule saying you need to buy the wrong ones. ;-)

@Trainwreck1123 23 дня назад

Your intro explanation and videography was especially impressive on this video. I swear you level up every new video, it's impressive and definitely proves that you deserve every one of the 411k subs you have (and more)!

@chriswickline6354 23 дня назад

I love your story telling methods for your videos!

@TacticalDumbas5 23 дня назад

Oh my god, the antics you have with your wife is amazing.

@paulmurray6538 23 дня назад

I ❤❤❤❤❤❤❤❤ your channel, my only complaint is that there is not enough of it. I have watched every single episode that you have made and it feels like FOREVER since the last episode. Please film more, much more.

@MrTaz0079 23 дня назад

Agree 110%, I also have watched every video... Some twice even 3 times...

@brianneftalicontrerassanti3091 23 дня назад

Dude you are so lucky, she is definitely a keeper

@cliffwood7386 23 дня назад

I've spent the last 2 days watching videos on gears and then this pops up in my subscription feed. If your next video is a purchasing guide for mini mills and lathes I'll need to start looking over my shoulder for cameras!

@Mark199201 23 дня назад

This is one of my favourite episodes so far! Great effort and lovely culmination, plus an excellent collab with your wife

@yippiekiyay2416 23 дня назад

You need to do a project series with her man. That would be the coolest and funniest series ever for the maker youtuber community!

@rowdyspeaks42 23 дня назад

Got posted only 46 secs ago, number 1 fan💪💪

@curtkeisler7623 23 дня назад

Perfect. Can't wait to see what you do next. Hurry up!

@NemoA90 23 дня назад

ive seen clickspring make 4-toothed gear cutters, but this is a whole other level

@cheffrin3751 22 дня назад

I've only just found you channel like a year ago. But it's amazing to see your work. We honor our grandparents/parents by using their tools and the skills they teach us, and you're clearly doing that. I have no doubt your grandfather would be pretty chuffed to see you knocking it out of the park in the shop. I also love the way your wife gasses you up. Having the support of out loved ones makes us unstoppable. Keep on doing what you do and I'll keep watching!

@dimitar4y 23 дня назад

first 10 seconds, you have me down on the floor. Nice.

@sky173 23 дня назад

Wow, I wish my wife got that excited about anything I did, lol. Great video as usual.

@thalivenom4972 20 дней назад

legitimately, the support your wife shows you, is more valuable than all your tools. btw, that button cutter system is amazing. i had zero faith it would work, and not only was it beautiful, it was graceful. bravo.

@johnsaluk4689 23 дня назад

This was a great lesson on “how it’s made”. Always enjoy your videos.

@iolithblue 23 дня назад

Yeah, so you aren't running a machine shop. You are running a toolroom. Some big stuff here. Very nice.

@cristinelcostachescu9585 23 дня назад

I love the way each project goes to make the next part, for the next part, eventually up to something big. I expect nothing but a big, giant project when you're done with your gears! Cheers to your wife for being actually impressed and excited for your work, truly one in a million.

@jmonsted 23 дня назад

Wifey is adorably amazed at the end product :)

@ArckRanger 23 дня назад

The only thing I’d like better about your “simple lettering” (which looks amazing btw) is if it were curved around the center hole.

@rpower1401 23 дня назад

Losing your mind building a super complicated system that impresses even your wife....achievement unlocked!

@TG_humaN 22 дня назад

Seeing you light the torch towards the hoses at 5:25 made me skip a beat, but then I remembered I'd probably pull the same thing lol.

@RonCovell 22 дня назад

Brandon, I had no idea what that contraption was that you made in previous videos. Now that I see it in action, I am amazed and delighted. What a fabulous project, and I am so impressed with the beautiful gears you are making!

@Thunderpulse 23 дня назад

This video feels different

@BaronessCaroline 22 дня назад

I think it's because the intro is missing

@VEC7ORlt 23 дня назад

Really? Circles? That is all you need to cut gears? Ridonculous, and there I was writing a piece-wise approximation for some low duty laser cut gears. Also having a spouse with such a keen interest in your hobby is a godsend!

@CrazyHatDave3000 23 дня назад

There is another really good video on this topic over on the Click Spring channel.

@mrimmortal1579 22 дня назад

@@CrazyHatDave3000 yeah the Clickspring video is a pretty good one… completely different process for achieving remarkably similar results! Clickspring gets points for having an accent that’s like butter dripping off a hot biscuit, but Brandon gets extra points for working some toilet-time into a video (in a sponsor’s ad, no less) and for his wife’s giddy enthusiasm for his hobby projects!

@ahfreebird 22 дня назад

Piecewise approximation!? The math to generate an involute is (relatively) straightforward. Unless you're talking about the transition from tooth face to root radius I suppose.

@VEC7ORlt 21 день назад

CAD I have can't do freeform parametric curves, so I've made it out of 10 segments,worked out just fine.

@dumbo800 9 дней назад

@@ahfreebirdno need for anything fancy if you use a hobber or shaper to generate the involute curve instead of approximating it. Gashing teeth is great, but the only way to get a perfect involute curve is to generate it in the part itself.

@stormchaser8605 21 день назад

Wife adds a cozy element to the video, appreciating her humoring your shop explained parts

@ronsteelable9405 23 дня назад

I love that your wife is so excited about your work. I show my work to my fiance and she just mehs.

@mrsockyman 23 дня назад

Combining the pantograph with a 3d print would be such a sweet combination of new and old technology

@ProtonOne11 23 дня назад

Yeah, would have been cool to have the text 3D printed as the template in an arc ,so the text would be curved on the gear cutters as well. I don't think there is an easy and fast way to curve the text otherwise, you would have to readjust the gear cutter after every single letter.

@millinoid2151 22 дня назад

This is a really cool idea. 3D print the entire alphabet in various degree offsets left and right so you could build arced lettering for the pantograph to copy over… although storing that many unique letters for it would be a bit of a nightmare

@RNMSC 22 дня назад

@@millinoid2151 Probably need a side project for a sane storage system...

@mrsockyman 22 дня назад

@millinoid2151 it's a great blend of one of the cheapest cnc machines, with elegant manual machining

@RNMSC 22 дня назад

@@mrsockyman An alternative might be to create a set of letters that are all uniformly spaced and the sides are all angled for a given center diameter, then a mounting plate to set them up in a circle, center the circle under the pointer, and adjust the center and scale of what you're lettering so that the pantograph cutter ends up where you're looking for the lettering to be. You end up with a single set of however many letters you want and (go get a Scrabble set and use the number value of each letter to divide 10 by (or whatever the value of Q or Z are) and make up that many of that letter. Numbers might be a different issue, but you should end up with something like 38-40 letters, numbers and required punctuation. More if you are going to include various other symbols in machining such as theta, center marking, etc. Which simplifies thins from trying to decide do I need 360 of these for any angle on the pantograph, and how am I going to align everything so that the cut ends up where I want it for each letter. One of the interesting things of watching JSK-koubou, is the realization of just how much you can do with what seem like really basic tools, if you go at using them from the perspective of using precision as your own mindset.

@Eis_ 23 дня назад

"I actually made five of them, which is why this project has taken so long, and the stupid thing is I only need one of them." - Brandon, 2024 That's his grandfather's blood showing itself, right there. I'm sure he's proud.

@Franklin_Johanessan 23 дня назад

I adore your videos, they release after a stressful Friday, prefect for watching in bed before sleep ❤

@concretew День назад

Hell yeah stubies! That's what we wear all the time down under!! Also insane project! I can barely comprehend how much time and effort and insanity this took! Love it

@TgWags69 23 дня назад

Tart cherries are indeed red, and it's what the saying is referring to. The maroon/purple bing sweet cherries in the supermarket are a relatively recent invention but yet it seems the entire population has forgotten that once bright red tart cherries were the norm.

@guytech7310 23 дня назад

LOL! Maraschino cherries. Bing Cherries are also bright read. Its the Black cherries sold that are a dark red color. Some stores also sell very light color cherries that are a marble of orange & red.

@JK-bg3wx 23 дня назад

woah never been this early

@mduvigneaud 19 дней назад

"Are these the things you have been toasting in my oven for the past 3 days?" I love that!

@denishenea2996 23 дня назад

I’d just like to say that these videos are fantastic. However the font on the thumbnails is a little off compared to the previous style which I thought was more in line with the overall look and feel of the work and character. Just a friendly comment. Either way, great work and much love.

@MomoPrior 21 день назад

Every time your wife expresses unadulterated joy and genuine fascination at what you do and what you've made it adds a year to my life

@alexanderlytkinson 22 дня назад

Your wife's reactions are amazing! Love and take care of each other. It's rare to see support like this. And the video is perfect as always. Not long ago I realized that I also like your videos because you don’t hide your mistakes, if something goes wrong, you show it, work on the mistakes and continue. It deserves respect.

@GabeJohnston222 18 дней назад

your videos never old to watch... they could be 30 hours instead of 30 mins and I'd still watch every second

@jamilmohamad4758 22 дня назад

Man, being able to do all this in your garage is fantastic!!!! Your wife support is on another level !!

@BruceBoschek 22 дня назад

The form-relieving tool is probably the most impressive shop-made tool I've seen. This video, in spite of the distractions 🙂, is an excellent introduction into gear making. Thanks.

@yochva 22 дня назад

The introduction/exposition section was _fire._ I was smiling the entire time. And I love that you've started to bring your wife in to demonstrate and express enthusiasm. Overall, I just love how your presentation has been evolving (no need to refer to your camerawork and machining - those were top quality from the start).

@thorwaldjohanson2526 23 дня назад

I almost expected another side project to hold the lettering templates in a radius :D

@TgWags69 23 дня назад

To help reduce the possibility of crashing like that is to turn the blanks around backwards while cutting that first profile. That little bit of an angle will be less likely to grab.

@mvadu 22 дня назад

This is one of the best machining videos I watched.. The logic behind the gear shape, their cutters shape, their cutters cutting shape all has been a great learning (I am not a mechanical engineer). Then the awesome exchange with your wife is a joy to watch.. 🎉

@RussellTeapot 22 дня назад

18:05 that was exactly my reaction when I saw the finished gear cutter, don't know anything about engeneering or machining, stumbled across this channel by accident, and I've been mesmerized by the beauty of these fine pieces

@drokles2125 22 дня назад

The one person I am willing to sit through an ad read of it you. Mostly because you manage to mix in a bunch of humour while still getting the points across

@averygrey2793 22 дня назад

Hootchie daddy shorts, decorative bits, fricking gear cutting and your awesome wife. This episode is jam packed

@rob7439 21 день назад

This has got to be one of the most satisfying conclusions to a project Ive seen in awhile.

@colinsmith6340 21 день назад

The way your partner is so enthusiastic about your work. Its so amazing.

@fellipec 23 дня назад

It's wonderful how your wife is excited about the things you make. What a man can wish more for life?

@Trainwreck1123 23 дня назад

I absolutely love how excited your wife is! I don't know if that's genuine or if she's playing it up for the video but either way good for you, having a partner that can show interest in your interests that is (or seems) genuine is a special thing! P.S. Sorry about the several comments, hopefully it is just good for your video engagement 😅 I got to certain parts of the video and felt compelled to add my 2 cents

@roberttruehart8887 56 минут назад

I work at the LS starrett company (16 years) cutter grind department. I make cutters from scratch all the time 😅 and wanted to let you know that I found this video series fun and enjoyable 💯

@TalRohan 22 дня назад

"Ah this is what you've been baking in my oven for the past three days" I like it when the plan comes together...and its not just me it makes sense to. Those are some very fine gears you made, who would think that such a lengthy process was needed in order to make a workable part. Its nice occasionally to remember just how much goes into the things we use I see this as important as some one building a smelting furnace and making bog iron into wrought iron, then sorting out the higher carbon bits from it and forging out that steel until it can be used as a workable blade Very cool process and well worth learning and remembering two processes that shaped the world for humans

@mattinkel7342 22 дня назад

This channel always helps inspire me when im feeling burnt out from the current work load.. and I've said it before and I'll say it again its always such fun to hear you and your good lady humouously sparring whilst enthusing over projects she has perfected the dead pan "yes dear" tone while clearly loving how excited you are. It's a beautiful thing you found each other.