IoT based ESP8266 projects using Google Assistant Alexa & Cadio 

Hi! Thank you so much for your detailed instructions of controlling my esp32 by alexa thru cadio apps. I am sure i will enroll to your tutorial course soon.

I really like this project, it's easier and more complete, thank you sir for sharing your knowledge

Can you guide use IR control 4 relay with cadio ?

Sir can you please do using only mobile including coding also in mobile because i don't have any laptop so pls help me sir

is there a way to turn on all relays at once with 1 command??

Wow! This is a wonderful Project. I just did the project and everything is working fine. Thanks for the good work. But, Please Mr. Tech Study, How can I re-enter the configuration mode, to add some sensors and also change "Press" to "Normal" for the use of Latch Switches?

Sir, 1 question. Which use jumper wire typ?? (Male to female ya male tomale) answer

5 volt and 2 ampere power supply?

Hi, will this project work with the esp8266-01 module?

no log files were in the flash tools files the logs folder is empty help me with this issue

I have esp8266 v3. Push 1 with gpio 10 (S3) is not working with push btn. I tried 5-6 times.

@techstudycell Nice and very easy project for beginners like me... Can you please make same project using ESP32 for 4-6 switch, 1 fan with RF receiver

Hello Tech StudyCell, I really like this CADIO app. I also tested this program on 4 bulbs and it works perfectly. What is the price of CADIO application full. And is it a one-time payment or monthly payments. Thanks for the information.

Sir I have a question why we use only 5V relay and not 12V or 24V relay. sir why we don't use relay with optocoupler. Sir I want to automate my bathroom geyser since it is high power.

Bro ma switch ke jagha ttp 223 capactive touch sensor use kar raha hu to kya edit karu

How can i cofig button, indicators, devices again? i only can config in fist time

How to use ESP01 in place of ESP8266?

hi, after configuration device is not showing in cadioapp can u plz tell me why its not showing to me and sometimes com port also not showing for me

Can we combine this Project and ur universal remote problem... Please reply is yes what pins should I change

3:11 how to turn off booting process?

Hello sir I followed all your steps correctly but after configuration the relay is dimmed on but when I press the switch it glows more and does not get controlled through cadio app. Please help what is the issue

Sir Plz Give the link of BOM file and CPL file which you used in this projects

What it means showing "trial"? Do we need to pay after trial period?

My manual switches not working 😢

Hi, I'm really looking for same, can I have a same circuit with touch sensor ttp223

How do you know GPIO address for Configuration is D8 - 15 ? Can you also let me know GPIO address for configuration for ESP-01 ?

Adab bro i am from bangladesh i bought an esp32 but how can i set the program i don't have any laptop or computer i only have android mobile please help me bro

Can i use ttp223 touch sensor in this automation???

its a great site to exeperiment tq for shring all the knowledge about home automation can u share the pcb

Sir, Problem is in code sinric pro.h error.Please tell me I copied you code after some changes.

Is the manual switch two way switch(spdt) or one way (spst)

Sir how to 8 chanel relay connecting esp 8266 use with cadio

Nice project cadio paide app hi charg Brother Plz door lock sistam keypad ya fingarprint lock video and cod

If i perform the project without switches what will happen , with is the charges that I have to do?

Hello, i tried to use nodemcu CH340 but the switch 1 connected to pin SD3 is not working. Could you help for the solution or alternate pin for switch 1?. Thx

Where your cable is connected to ??

can i add touch sensor switch

Dear sir please provide esp01 Cadio firmware.. It's note available on cadio site

Hello can you make ir control with 2 fan and 4 lights

Cadio wifi not showing. Help pls

Hi, Can you provide me the BOM and CPL files for this project to upload in jlcpcb

Thank you for sharing such a beautiful video. Please guide me because my one switch is working but other is not. I checked the wiring and configs but no luck. Same switch works in case wiring is switched between both switches.

can i use more than 4 switch? if answer is yes then how

Sir, good project👍, what make difference if you use either ESP32 or ESP8266? please! I am not challenge you but I need to understand

hlo sir, can we control the fan speed using cadio application, if possible can u make an video of it, it will helpful to people, thank you.

Can we give 5v from usb pin

dose it need to reprogram it every 21 days?

Hi, good afternoon, I've been watching the videos and they seem excellent, I congratulate you, I just have a question, in a previous video I saw how you made a temperature-dependent irrigation system with an ESP32, I would like to know how you can do the same project but now implementing the time; I mean that the same ESP32 can water plants both due to humidity and at a certain time

@Tech StudyCell: So can I use CADIO app for free lifetime?

@techstudycell can you pls send us the code that you used

your code is useless..it is not working.code send error in ardiuno while uplode

Sir nice project but opisite worked when press on ,off relay and when press off, on relay how solve?

Sir ji, can I use it in this project instead of Wi-Fi router by connecting internet through mobile hotspot? 😢 Please reply sir.

hi can i use this esp 8266 for 8 relay?

I am unable to upload the firm file into the ESP8266 microcontroller please help

Can we integrate with home assistant

can u do it with 10 relays

not connect before wi-fe

Hi.plaes can you giv me code by uplode for esp8266

Please provide zero pcb circuit diagram of it.

can you please provide code file in your description

Google assistant not working

@Tech StudyCell Which is better CADIO or Blynk0.2

Hi, Sir can you provide me BOM and CPL file with Gerber file.

Can we operate without internet ?

Hi Can you make a water leak detector wireless iot based With esp8266

Sir nodemcu wifi reset kese kare

Sir isme or ak future rgb light ka add kardo ❤

Cod ki kore input korbo phone dia

Does this project need wifi router

Which is better CADIO or Blynk0.2

Sir the NODEMCU didn't connect with cadio why

Sir, i program how fo phone

How to add IR

How to make staircase light in esp32

How many area range control by automation

On my Board esp8266 Lolin S3 = gpio9 SK = gpio10 😢😢😢

Cadio firmware is free for life time or any limit

where is the bcom file

Esp program file need

How to re-configuration please reply..

I want to buy it

Hello friend.please make alexa or google assistant conroll home automation using ESP 01 module and please program the ESP 01 module with computer step by step. step.thank you very much.

Is it possible to add fan dimmer?

This app is not free only 500 hours the draw back

Are you use in code or not

Nice but a repeat of the last video, why not do a security system using Cadio more useful

Par ye permanent. App naho he

Can i install it on esp01

Can i flash ESP 01 with CADIO?

You didn't provide code buddy

Bro where is BOM file

Ambala may kaha rehte hai aP

All cost

ভাইয়া ওয়াইফাই বন্ধ হওয়ার পর আর চালু হইতেছে না

nice

is this app free during use

my cost lost😢1000

why

Sir its not free because its traial