iPhone 6 Complete Tear Down and Rebuild with Custom Housing 

I watched this video all thru; you have a very relaxing mellow toned voice, so thank you for all the info on this tear down!

Watched whole vid, was very thorough and I'm glad I watched it. I completed the whole iPhone in about three hours and you were very clear about what to do. Thank you

I did it!!!!!!! First go. I had no probs with the little metal disc's that went in volume buttons. There was a small metal plate that need to be fitted after installing camera that had no mention in your video. But thank you "Go cell phone repair". I could never have done without you. Have learnt so much during the process. Took me 3 hours. But thoroughly enjoyed!

Your Tutorial is awesome! and, I like to watch what goes on in real time, the real things that you encounter along the way. Thank you, well narrate it and nice voice also!

Great tutorial, as stated in the commentary worth watching before you start the tear down, worth magnatizing your screwdrivers as this saves so much time in locating the screws.

This was really interesting to me and I plan on doing this soon so I watched the full vid prob going to watch it again

Watched the vid about 4times getting ready to do this in a few days

great tutorial, got done swapping an iphone 6 housing a few minutes ago and it was a success thanks

Just followed this tutorial to the tee and replaced my housing thanks to you. Your method for organizing the removed screws was a life saver. Had issues with removing two screws that ended up being stripped but that was due to the crappy screw driver I had. Thanks again for taking the time to make this tutorial don't stop doing what your doing people out there like me need your videos!

Great tutorial, replaced back housing pretty easily though I did end up with an extra bracket.

This was very helpful! Thanks so much for explaining everything so carefully. I change my iPhone 6 into the looks of and 8! Its works better than before! I couldn't of done it without you, again, this was so very helpful.

I like the narration too and I appreciate the effort you put forth here. A++

This video is a life saver. Thumbs up and subscribed. Many Thanks.

best in the business by far ..watch the whole video, step by step its fantastic thanks again!!!

you are my hero. it took me 5 hours to complete but i did it :) thanks

thanks for share video on youtube, now i can housing my iphone 6 to iphone 7 custom cashing .. dude i really thankyou

Thank you. Excellent Tutorial.

Thanks for your video, it's helpful for me

This video helped me so much... THANK YOU!!

Thank you so much I was nervous I would have to replace my iPhone charger I clean it out with toothpick and what you recommended and now my iPhone is charging again

lol i watched this entire vid just for entertainment i dont even have an iphonem6 but i plan on doing this one day. his voice is so soothing lmao

Awesome video! Very helpful. I have a issue.. I have to unplug the Batterie for a Short Time to Start um the iPhone.. So you have Army idea to fix it?

Great teacher😊❤, thanks.

Phewww I’m done final result awesome Thank u Very helpful video

I have an iPhone 7, and i have an old iphone 6 and im deciding to mod it, to match the matte black 7, i orderd a glowing apple logo for the 6 so i can attempt to do it if its a success ill do it on my 7 (just the glowing apple logo) and i got the same housing, i just didnt swap the gold and silver pices… i kept the silver

Works perfect thanks

thanks for the video, after finishing my screen is but isn't siting down. what do you recommended i try ?

Awesome Video! I have one problem: I replaced the normal housing with one of the "iPhone 6 like iPhone 7" Housings and after i completed it everything worked fine but then i realised that my camera doesn't focus anymore.. Do you have an idea why and how to fix it?

thanks for this video

thanks! your views sestem is good

I put the same housing on my 6s and it turned out great. But putting a green one on my 6. I lost the little metal dot for the volume button. Where can I get a replacement? Thanks

Be careful, when you change the housing, sometimes you loose the wifi signal, or the network signal is low. You have to scratch the screw on the new housing to have a better signal. Thank you for the video.

You should connect the battery after the screen so you don't have the chance of shorting out the back light circuit. wich will blow the chips on the mother board

For anyone trying this, you do not need to purchase the stand-off screwdriver if you don’t own one. A flathead works fine. Also for the little metal circle on the volume buttons, a little bit of superglue will hold it in and not affect the functionality

bro can you recommend me a screw chart some screw card which show which screw belongs where for i phone 6s plus?. i will change back housing. but im afraid to forget where to use right screws and confuse them all.

i love this vid

Great video 👍🏻very useful now am gonna change housing myself. Do I have to take back up my files before changing it ??

thanks for the sharing may god help me lol i'll do it today

///////////that was pure skill

You sone exactly what i would’ve done when it came to that blasted foam round the camera lol

Thanks

*Front and back camera, and flash aren’t working anymore?*

I think you might have forgotten to put the link in the description

Thanks for the video! Quick question, how long does it take if I want to just disassemble the phone? Thank you!

Friend you have for iPhone 6s Plus

Thank you for the video , now I have the same backhousing as you but I have a question , is it normal that the vibration so loud is of did I something wrong?

HI, great video! But one little problem, you may help me with... I´ve been doing smartphones repairs and changing to the custom housing for a years, but until now never had issue with rear camera focusing after changing to the custom housing... I am pretty much sure that I´ ve done everything just fine, camera is working but it just wont focus which leads to poor quality of images ofc... I´ve tried with af lock (long tapping) but did not help... Also I did notice that the metal holder which came built in the custom housing on the place where rear camera comes, is a little bitte different then original one (yours also, mine is same as yours), original one has a tiny teeth on two sides of the circle edge of the metal holder... so I was wondering maybe is in that problem, maybe those teeth are giving the ability to focus the camera... also I just moved the camera from original housing to the custom, there are little chances to break it during that time... any suggestions what might cause the problem? I´ ll try to buy a new rear camera and replace it, but I do not believe it would help...

Watched this through 3 times now in preparation to put an iPhone 7 style housing on my iPhone 6... I take it that you can swap the lightning port/headphone jack assembly and speaker over to the new housing before tackling the logic board to make screw organisation simpler.

Thanks for the video. :) Hopefully the one for iPhone 6s is still coming? 🙏

Awsome video mike, you have a apple glow kit for 6plus?

I want to make my iphone 6 but what is main thing I need to buy body . logic board, lcd screen and battary , what I should buy next ,

How crucial is the screw location? ( I obviously understand if the long screw won’t go in don’t force it), but I put certain parts with the accommodated screws in little containers for each piece I took out, so they’re all kept together, but I mismatched the screws, help?

The pictures from the ebay offer from the description do not contain the apple logo. Are you sure that they will come with a logo?

Whats the cable on the right side of the camera you removed at 21:21 mines missing and i thunk its effecting my signal constantly at 2bars and thats the only thing im missing on my phone after i changed the back. please help!

I have a question, when i tried to unscrew the screw from the speaker the screwdriver broke the screw and now I do not get it out there is something I can do?

3:54 if your phone has Touch ID if it hasn't been opened before, don't pull all the way or you will snap your Touch ID cable

i changed my iphone 6 housing with red iphone 7 housing, its look fantastic, but i have a minor problem, the camera wont focus, i dont know why, many thanks

Plan on doing this to my phone my last phone got stolen so they only had pink in stock to replace it wish me luck and cosmic vid \\m//,, !

I ordered this and it's coming in a week but I have a question, I have a gold iPhone 6 so it has a white front. Is it possible to make that black as well or will I need to get someone who can do a paint job on the front. Thank you for your time

Hey buddy I am not a professional and doing it first time so can I do this task properly?

I want this for my 6 plus how can I go about it?

Is AAA quality ? If yes did you have problems with this housing like signal drops or bending after a drop ?

I am from india and i didnt get this housing😒 Is there anyone who can help me? Actually i need iphone7 style housing for iphone 6.

hello can i put iphone 6 plus motherboard to iphone 6s plus housing its the same or not thanks for your answer

Hello, where I can buy same black/gold housing ?

Plz tell me sir...where to buy this housing...🤧

I tried it and now my Audio Jack doesn't work anymore. I also replaced the Lightning flex cable without success. Does anyone have a solution?

Followed everything accordingly but phone wont turn on. Possible problem?

i have a 6plus model a1522 that im trying to replace but i cant find the same model any help?

WTF!!! I ended up with 4 extra screws!! Now what..

Hey i did this on an iPhone 6 plus, anyone had an issue with touch ID not detecting your finger. Touch id is working cause i'm not getting a message saying touch id isn't available it just won't let me register a new finger. Thanks

I don't know what to do

CAn you do this with the iPhone 7 plus please

Where can i get the template for the screws?

but the back casing you replaced will not have the correct imei printed

Did this and my loud speaker isn’t working and also the volume as well as the power button is too lose ! Lost my down volume button! If you want your iPhone to be compact don’t do this.i recommend but the phone looks awesome :)

lamo am i the only one that noticed that dope ass ring??

Same for iPhone 6 Plus?

It's the same if I have iPhone 6s???

come posso svitare una vite spanata?

Everything else is working except for the speaker

i i ask u somthing my i phone 6 not open only apple logo show but not open now me charger my phone then only battery show red not charge what problem my phone pls sent me your whatapps im sent u my i phone video pleass help then tell me what problem my phone

A word of caution. Apple has taken to having their screws of differing lengths. Meaning if you put a longer screw in shorter hole, it will damage the circuit on the end of that screw. Hopefully the 'right to repair' campaign will outlaw practices of this kind aimed and preventing you from doing minor repairs.

Devi fare un corso di orologeria, ma come si fa a maneggiare pezzi micro con le mani!!!!, devi imparare a lavorare con le pinzette come gli orologiai.

1:03:03 lmao

Worst phone iphone