iPhone 8 Plus Screen Replacement

Подписаться 38 тыс.

Просмотров 65 тыс.

50% 1

This is step by step tutorial on how to replace iPhone 8 Plus cracked or damaged screen.
Amazon:
iPhone 8 Plus White Screen - amzn.to/3bhUFxt
iPhone 8 Plus White Screen - amzn.to/3cm1YEv
iPhone 8 Plus Black Screen - amzn.to/2XFJ1Zi
iPhone 8 Plus Black Screen - amzn.to/34IwCp9
Screwdriver Kit - amzn.to/3e6ZICH
Pry Tool - amzn.to/2Vd5gmH
Ebay:
iPhone 8 Plus White Screen - ebay.to/3aea54B
iPhone 8 Plus Black Screen - ebay.to/2z8irOn
---------------------------------------------------------------------------------
If this video is helpful or helped you, it will be nice to have a cup of coffee.
Appreciation support to UberGeeks via PayPal:
bit.ly/3badyS4
Subscribe to our channel for all our latest videos!
/ ubergeeksbiz
Follow us on Facebook:
/ ubergeekshawaii
Follow us on Instagram:
/ uber_geeks
As an Amazon Associate I earn from qualifying purchases.
As an eBay Partner Network I earn from qualifying purchases.
Legal Disclosure:
UberGeeks video(s) or information provided on this website does not, and is not intended to, constitute legal advice, constitute IT professional advise, information technology expert, or tech related material; instead, all information and content available on this are for entertainment purposes only. No information contained in this video shall create any express or implied warranty or guarantee of any particular result.
UberGeeks shall not be held liable for any damages, losses, injuries, loss of data, or harm arising from the use of information or techniques presented in our video(s) or information provided on this website. By accessing and using our content, you agree to release us from any liability.
Participation in any activities or experiments presented in our video(s) is entirely voluntary. If you choose to replicate any actions or experiments, exercise caution, and prioritize your safety and the safety of your equipment.
Thank you for joining us on this IT journey. We hope you find our video(s) enjoyable. Remember, your participation in this channel is at your own discretion, and we encourage you to use the information responsibly and safely.

Хобби

Опубликовано:

28 июн 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 109

@arpier7754 3 года назад

Out of so many how to's you are the only one that said something about placing tape over exposed wire... that fixed my problem! Awesome friend... I am definitely a subscriber!!

@UbergeeksBiz 3 года назад

Glad it helped

@CapibaraHD Год назад

Was the problem battery drain?

@randomweekly2947 Год назад

Hey man so I got a red iPhone 8plus with a back screen and home button can I replace the screen and put a white screen instead??!?

@Cueteman 3 года назад

This is a good tutorial. The phone opening tool is a must and a good set of micro screw drivers.

@UbergeeksBiz 3 года назад

Thank you. Yes, right tools get the job done.

@descarrington 3 года назад

I used your video and found it very helpful but I do have one criticism... I think it would be better to give the advise of keeping the camera cover screws in order because they are different sizes when removing them not as you replace the cover. Hindsight is a wonderful thing especially as the point of the tutorial is to give foresight as to what to do.

@UbergeeksBiz 3 года назад

Thank you for your comment !

@soon1429 3 года назад

i'm going to try it, I've spent too much money on the guys at the mall. basically charging 100 bucks every time, they make it seem hard but last time like a month ago I think I stayed and watched and it looked super simple but the guy kept telling me how hard it is. it doesn't look too bad, I've switched out an iphone battery before so I'm more than sure I can handle this. Thanks for the video and all the product links I will be trying this rather soon.

@UbergeeksBiz 3 года назад

I'm sure they want the sales. Wish you all the best. I'm sure you can do it. Let us know after your repair.

@pepperjack-ue7dc 3 года назад

my last two little screws on home button is not coming out on mine ...

@UbergeeksBiz 3 года назад

Is the screw stripped ?

@pepperjack-ue7dc 3 года назад

@@UbergeeksBiz probably not and im probably using the wrong tool , I ended up going to repair shop and they manage to replace the screen ... Thanks for the video...

@costaricaBL 3 года назад

Thank you so much for posting this video! It helped me out a lot! I smashed my phone and this saved me so much money.

@UbergeeksBiz 3 года назад

Glad it helped!

@Burner355 3 года назад

Ordered my screen yesterday should come today or tomorrow. I'ma try this out I'll keep you guys updated

@UbergeeksBiz 3 года назад

Good luck !

@auzgy7557 3 года назад

i saw something saying iphones notice when the screens not from apple etc and gives pop up erros for the new phones i think, is it the same for the 8+ like if its the newest ios

@CapibaraHD Год назад

Bro never kept us updated :(

@dreze888 4 года назад

Worked perfect. Excellent tutorial. Thanks brother. 👍

@UbergeeksBiz 4 года назад

Glad it helped

@josepena2812 3 года назад

Great job explaining step by step,I just did it and was great...

@UbergeeksBiz 3 года назад

Awesome. I'm glad the video helped.

@MrTimdtoolman1 3 года назад

Thanks for the great video. Very easy to follow. Very professional.

@UbergeeksBiz 3 года назад

You are welcome

@chinaphonefixteam6300 Год назад

nice and clean work!

@crashmaster520 Год назад

Hi, good video and I have a question, what kind of brand you recommend me to buy earpeace and loud speaker?

@thelebronfam 3 года назад

Highly recommended video! My first time and I did it!!

@UbergeeksBiz 3 года назад

Glad it helped!

@charlschuck6 9 месяцев назад

So there’s no need of lcd cloning for this iPhone 8+ nor if I even updated to the lastes iOS ? I heard newer iPhones needed a cloning machine for a simple lcd 😊

@mohamedlaminbah9945 11 месяцев назад

Thanks very much for the tutorial. But you forgot to disconnect the battery flex from board which is a risk that will lead to frying the board when connecting screen. It has happened to me one point a time when changing LCD.

@UbergeeksBiz 11 месяцев назад

Thanks for letting us know

@eirfankhan98 Год назад

How to remove pressure spot appears after when put the screen on motherboard and fix it . And when put away the screen from mother board the pressure spot go away

@welcomegod 2 года назад

8:45 what happen if we don't do that? the sticker thing.

@anbaan2777 Месяц назад

Thank you

@TheJqueezy 3 года назад

This worked. My phone is now fixed. Thank you.

@UbergeeksBiz 3 года назад

Thanks for sharing your comment.

@mariocean808 10 месяцев назад

Thank you!! The screw size tip should have been in the very beginning though 😑

@ufufu001 3 года назад

thanks king

@UbergeeksBiz 3 года назад

you are welcome

@pedrourieta507 11 месяцев назад

10:20 what happen if we dont tape over that metal part

@politicalsoulgamer4513 3 года назад

thank soo much sir...datialiable

@UbergeeksBiz 3 года назад

You are welcome

@cezosiris 2 года назад

Is it possible to just replace the home button flex that connects to the motherboard? i ripped it while opening it

@bt7482 2 года назад

it is not possible as the home button is paired to the motherboard.

@cezosiris 2 года назад

@@bt7482 oh i mean the cable extension that connects the home button to the motherboard

@UbergeeksBiz 2 года назад

Yes, the back plate that runs as extension can be replaced. Just change the entire back plate with extension cable

@cezosiris 2 года назад

@@UbergeeksBiz thanks

@naruto57able 8 месяцев назад

I followed every steps great video but I started having issues after * ghost touches *

@nundabe 3 года назад

Thanks

@UbergeeksBiz 3 года назад

No problem

@harmindersingh8401 Год назад

Hi there, i changed the screen but its not turning on. When i plug the charger it sounds that means phone is working but the screen is not turning on. Can you please let me know how can i fix it?

@thestrugglingtraders9370 3 года назад

Hi, I did this but the screen is not turning on, even though i hear the phone turning on and it vibrates when i switch it to vibrate on the side. any ideas on why this could be happening?

@UbergeeksBiz 3 года назад

Hi, I would think the connector is not press in firmly or the new screen is defective. Try to take it apart, check the connector pins and reseated them back firmly. Good luck !

@elayneguillen8917 3 года назад

Disconnect the battery then connect it again try turning it on

@JoeKleineTech 3 года назад

It would be nice if you stated which screwdriver you were using for each screw you were taking out.

@UbergeeksBiz 3 года назад

The bottom two screws are Pentalobe TS1 0.8mm. Y screwdriver is TP/Y 0.6mm. for the screen and bracket. And last screwdriver you need is philip PH00 screwdriver.

@pedrourieta507 11 месяцев назад

i did everything, when i try to turn on only the white apple logo appears, then shuts off and repeats over n over

@Giovanni.Tedeschini 3 года назад

Thank you for the tutorial! Do you recommend to wear gloves? Why? Thank you, GT

@UbergeeksBiz 3 года назад

Covid... hahah. Stay clean and safe.

@gaellebihan2044 Год назад

Should have explained at the beginning of the video how to order the screws, not at the end of it. Also, the rebuild is not in the same order as the dismantling. Still useful bit there are better ones available

@kevlarw7656 3 года назад

Great but did iPhone 8 Plus lose its one only feature True Tone cause I went and did a screen replacement and I lost that feature on my 8 plus :(

@UbergeeksBiz 3 года назад

To problem True Tone, you need to get this programmer to enable true tone. amzn.to/2UnPLeO

@kevlarw7656 3 года назад

@@UbergeeksBiz ok thanks buddy but I don’t know much about it

@Victor-tm2kl 2 года назад

What about the glue to “ keep water from going in” 🧐🧐

@UbergeeksBiz 2 года назад

Try use this seal: amzn.to/3xBmkFP

@liberalyes9415 3 года назад

Will I still have the True Tone option?

@UbergeeksBiz 3 года назад

No True Tone after replacement with 3rd party screen.

@matunutz1229 3 года назад

it's hard to see how you put the camera back in

@UbergeeksBiz 3 года назад

Try watch this video. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-syzqT60sy_c.html

@KevinSoupy 2 года назад

Did you get tru tone working?

@UbergeeksBiz 2 года назад

No. You need a true tone programmer device to reprogram it.

@wolvesmotivation1591 2 года назад

Is true tone gone after replacing ?

@UbergeeksBiz 2 года назад

Yes

@ank-hara 2 года назад

mine doesn't turn on :(

@politicalsoulgamer4513 3 года назад

sir my problem is the upper speaker is nit working

@UbergeeksBiz 3 года назад

You can replace the ear speaker.

@AndresGutierrez-nx3yt 3 года назад

sir i made the mistake to not unplug the battery and now the screen glows but its all dark with no apple sign. it vibrates and makes noise. i have a feeling i fried the motherboard. can it be repaired.

@UbergeeksBiz 3 года назад

If the motherboard is fried, it will not make noise or vibrates. I would say try disconnect the battery and reconnect again to see it the screen ok. If not, try putting the cracked screen to see if any display on it.

@bt7482 2 года назад

I bet if you tilt the screen just right you can see the screen, the backlight it likely out on the motherboard, it can be repaired at a quality shop.

@redeyedbuggers 3 года назад

Did you forget to unplug the battery cable or did I miss something?

@UbergeeksBiz 3 года назад

Recommend to disconnect the battery.

@redeyedbuggers 3 года назад

@@UbergeeksBiz oh ok. I love your videos man. I’m a beginner so your videos have been so helpful to me. Thanks so much

@UbergeeksBiz 3 года назад

@@redeyedbuggers You are welcome. Glad the video helped.

@kevinsoui7947 2 года назад

OK I have the JVC the only thing I see 8, n +8 tap motor/Except since it was made in China and grammar is off and so is excited vibrator. I thought it was to program my girlfriends vibrating. But the CPU on her vibrator. I got her a new rechargeable one. Now I can Play call of duty way more. lol it’s late and I’m just Babbling. Anyways back to the phone situation the only thing I see for the 88+ is to reprogram the tap engine is that even a thing? You should be able to buy a new chapter game put on any board and if you work fine? Correct me if I’m wrong. There’s no need for Tap engine/vibrator programmer. On most iPhones simply swap out and we’re good to go no program needed. I may be wrong. I assume if I just transfer the old one to the new housing I should be able to bypass that step. I don’t ever remember seeing that vibrator or their k motor had to be reprogrammed when changing the screen or transferring it to another board. Any input on that? Would be greatly appreciated. JVC that I have coming with attachments sold separately I guess I’ll have to buy the truth on 148+ maybe they have one for all of the iPhones on one board I doubt it though. But the Chinese have created some pretty amazing things to help guys like us keep up with apples changes trying to People from getting it repaired from Teck’s that are not working for them. I work for Apple for a little bit but I make more chicken wings on the side why do all the hard work and have them take all my money. I think it’s the guys that are doing the repairs and not completely Following through. Especially with the new iPhone they make today. Simple research most of the time what hamster will tell you about any new features text need to know when you’re repairing the newest iPhones. Anyways do you like your future endeavors.Keep coming with the informative videos and thank you

@attilaodor6002 3 года назад

I have a few concerns. I was repairing a friend’s phone and everything went well... until I turned it on. The display wouldn’t turn on but the phone was vibrating.

@UbergeeksBiz 3 года назад

Try this. Remove the new screen flex cable. And Disconnect the battery flex cable. Wait for 5 seconds. And reconnect all flex cables back on. Hope this will bring the screen display back on.

@attilaodor6002 3 года назад

It had no effect but did one good thing. The apple logo flashed up for 2 seconds before returning into a coma

@bt7482 2 года назад

@@attilaodor6002 Try booting the phone up with the front camera disconnected.

@KevinSoupy 2 года назад

did you unplug the battery when you were doing the repair you may have short the board. Also when you are attaching connectors to the board need to line up perfectly kind of wiggle until you feel it line up. Doing it in light check twice when you know it’s lined up press gently down you feel and hear a click then you know it’s all pins are in place I’ve done so many repairs in a rush. If your not careful you bend the Pins and then you will have to Sauter a new connector on

@KevinSoupy 2 года назад

@@attilaodor6002 the Apple logo came on that that is good. That means that displays working. Plug it into iTunes make sure the laptop is plugged in because your phone needs to be either charging or I have more than 80% do a recovery or download a new update

@danielgartin6993 3 года назад

My dad just took his iPhone 8 Plus to get his screen fixed, he uses it for work, phone looks like new, it looked pretty bad when the screen was shattered I couldn't even see the word "Verizon" in the corner where the carrier name should be

@UbergeeksBiz 3 года назад

Hope everything works out for you

@dentmastersofnymichael3316 3 года назад

Should have put on a new water and dust seal.

@UbergeeksBiz 3 года назад

Yes, you can get them now on the market.

@Giovanni.Tedeschini 3 года назад

@@UbergeeksBiz will you post a link for a naw seal?

@UbergeeksBiz 3 года назад

@@Giovanni.Tedeschini Here is the seal: amzn.to/3fnP1gc

@NyRiyah. 3 года назад

i ripped my camera cable and i think thats the reason why my phone wont turn on now please help.

@UbergeeksBiz 3 года назад

Can you tell me which cable you ripped off ?

@NyRiyah. 3 года назад

@UberGeeks the one that is close to the camera now my camera doesn’t work

@NyRiyah. 3 года назад

@UberGeeks but my phone turns on now🥰

@UbergeeksBiz 3 года назад

@@NyRiyah. I'm happy for you !

@NyRiyah. 3 года назад

thanks but my camera doesnt work

@plangh 2 месяца назад

It's not a good tutorial, he forget a new water and dust shield to install, and transfer the Chip from the old Display to a new Screen, now comes "not original Display"-Messages. 😞