iPhone SE battery replacement in 3 minutes fix

Подписаться 9 млн

Просмотров 720 тыс.

50% 1

Awesome Smart Phone Tool Kit: amzn.to/1XdJPuA
iPhone SE battery replacement: bit.ly/2998Y74
Green Pry tool: amzn.to/1Tu57pI
Phone opening metal tool: amzn.to/1WdOFv0
Fingerprint scanner metal latch: amzn.to/27o9SGk
LET ME KNOW IF THOSE LINKS STOP WORKING!!!
While replacing an iPhone battery is not the most easy thing in the world... it is still very possible. With a simple pentalobe screwdriver (linked above) and a little know-how the whole project can be done in about 30 minutes. You want to go slow and make sure not to damage any components.
If your phone is not holding a charge for very long, or if the phone will drop from 50% to 0% battery life without notice, than a new battery will probably fix your issue. Replacing the battery does not erase your personal information if everything is done correctly.
The biggest things to watch out for are the iphone screen ribbon cables. Make sure not the bend or flex them in any unnatural way. They are very fragile. Also, the battery needs to be handled with care. Do not bend, flex, or puncture the battery at all.
Good luck! Leave any questions you have in the comments below. And please subscribe if you found this video interesting.
iPhone SE Durability test: • NEW iPhone SE - Bend T...
iPhone SE Charging Port Replacement: • iPhone SE Charging Por...
iPhone SE Screen Replacement: • iPhone SE Screen Repla...
The camera I used to film this video: amzn.to/1IjlaCD
The Lens I used for this video: amzn.to/1QOXDw2
And this Metabones adapter: amzn.to/1R7Ltic
Follow me for updates!
Instagram: / zacksjerryrig
Facebook: on. 1U4bQqv
Twitter: / zacksjerryrig
GooglePlus: bit.ly/1YyKice
JerryRigEverything assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. JerryRigEverything recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, expensive electronics, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of JerryRigEverything, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not JerryRigEverything. Only attempt your own repairs if you can accept personal responsibility for the results, whether they are good or bad.

Опубликовано:

28 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 564

@tonydowney2070 4 года назад

Thanks so much, managed to change the battery, at 74 yo my fingers aren't what they used to be, but got it done. watched the video over and over. Thanks again.

@techbuildspcs 3 года назад

You are 74? You look much younger in the picture. Kudos!

@nick5422 3 года назад

Shoutout to you man👍🏽

@danielandmariewalter 2 года назад

Awesome 👏🏼

@andjusticeforall8813 2 года назад

Nice one mate, guessing ya around 76 now, I hope life is treating you well and good health Sir 👍🏻

@DanyangSong 2 года назад

you are amazing! congrats!

@sniperstatus4786 5 лет назад

"As you stretch the sticky stuff, it becomes not sticky stuff." -JerryRigEverything

@hannesvanhoe3863 3 года назад

De dag van de week

@bridlingtonengland75 6 лет назад

Thanks I successfully replaced my iPh5SE battery watching this! I used this video as my primary reference. Took me three hours. Technical for me is changing the oil in my truck. Never opened an Apple product before. Used the $10 eBay kit. 1. One thing, the plastic pry tool I had sucked. I had to use a box cutter...carefully. That took 40 minutes to do it right. 2. Pulling out the adhesive battery strips SUUUUCKED. One broke. I had to go to two other videos where one guy heated the iPhone with a hair dryer. I also placed the phone atop a bag of microwaved rice in a ziplock bag. Then I used fishing line to 'scissor' underneath the warmed battery/case until it came free. That was a pain in the ASS. So like this guy says, don't break those. 3. This video is shot really well. In real life those screws and such are SMALL. Make sure you have a good surface and at least the tools shown. You don't want to be pfaffing around dropping screws like a crackhead. You'll never find them. 4. There's a lot of videos but, this guy did everything right and in the right order. My phone charged right up. Freaked at first because the phone didn't turn on but, the battery was shipped totally de-energized to Alaska.

@bugatti272 4 года назад

HAHAHAHA "pfaffing around dropping screws like a crackhead" This made made my day, thanks!

@aaaaaaaa6685 3 года назад

The adhesive really is fragile, I had to use a bag of hot water and tooth floss to take it off since I didn’t have fishing line.

@AsadKhan-lm6yr 3 года назад

3 Hours!!!! 😱

@aaaaaaaa6685 3 года назад

@@AsadKhan-lm6yr if you do it right you can probably do it in 30 minutes

@davidcarlin3850 3 года назад

What did you use for the replacement tape ?

@macmccracken7337 4 года назад

Very helpful video. Removing the battery adhesive is definitely the hardest part. I had to heat the case and battery a few times and pry quite hard with a plastic knife to get the battery out. It does bend the battery a bit, but no worries if not bending it over double! It is good to test the connection by powering up before screwing things in place. The first tow tries, my screen showed lines, so I knew it wasn't right. Third time was a charm. Thanks!

@fenc666 Год назад

I just changed my mothers battery thanks to you. She will use this phone for another year or so. She likes it very much her speedy little iPhone SE from 2016! :-) Thanks a lot!

@josephgrant3247 Год назад

Three minutes? It took me two hours! But I would have never got it done without the help of this wonderful video - short but complete. There are warnings there - the sticky stuff breaks easily and it's devilishly hard to get a grip on the broken ends - when reassembling, it's very difficult to align the connectors properly before pushing them home - those microscopic screws are a pain to pick up and put in place - on removal, the spring clip covering the finger-print-scanner cable connector can, well, spring, an amazing distance, and be hard to find - and on reassembly it took me an exasperating ten minutes to align it before pushing it home. Take my advice - keep cool and be patient - you'll be amazed when the reassembled phone works perfectly first time (once you have given the new battery a bit of a charge).

@crissy7399 2 года назад

Video is very precise, would be nice if it showed the replacement tape- the one I bought did not have instructions and I ended up putting it in the wrong side. SUGGESTION. If you have smaller fingers I would suggest cutting the black pull tab so that each strip of tape is separate. you will be less likely to break the tape if you do one at a time.

@GeometricSynergy 4 года назад

Thank you for this video! Very straightforward and easy to follow. I got my battery replaced in around 20 minutes! (Battery was $6 on eBay)

@TheMoodyLoners 3 года назад

Thanks for the clear instructions. The only glitch I ran into was I had apparently not fully seated the first of the three screen connectors. However, I was somewhat prepared for this because I turned the phone on before moving on to the other final steps and closing it up. When the apple logo failed to appear I knew something was amiss and then I reattached the screen connectors. Got it seated and thankfully working again.

@jlpollitt29 Год назад

Great explanation! Easy to follow instructions. First, I watched the video twice all the way through then I followed installation of battery but I paused when needed to do the work and continued on as instructions progressed. I would recommended you have someone help hold the phone during this process. I used the tool kit I bought from your site but also had to use another phone tool kit I had from previous phone. It all came together on the first attempt and my phone is on and working great. Thank you!

@brinkwerks 4 года назад

glad i watched this. the written instructions w/battery kit for SE said to remove home button flex cable after the ribbon cable, which you didn't do. 1 risk less to deal with. thanks!

@georgedavid5202 2 года назад

Brilliant. Was thinking of investing in a new iPhone 12 mini but I think I'll just replace the battery instead.

@NorthernChev 3 года назад

I've heard stories recently about how Apple is now serializing their batteries to match a code in the phone, and it will restrict functionality if it detects it has had a new battery installed that was not done by an Apple certified repair facility. I haven't heard this necessarily applies to the First Gen SE, but for the newer models of iPhone.

@TheiPodski 2 года назад

Saved a fortune (and a phone) thanks to your helpful video. Couldn't have done it without this.

@dalpert9765 2 года назад

Well done video, thanks. Testing the screen before you close it all up is KEY as my video ports were not in all the way at first ...they make a snapping sound when seated correctly.

@dewajtis Год назад

Thank you, new battery is great and iphone itself is sooo much faster 😮

@AffinityInspiration 8 месяцев назад

I'd love a pair of those tweezers you use.

@imran4968 8 лет назад

Your reactions to the haters comments in Mathew Moinz's videos was hilarious and you are an awesome RU-vidr.

@shah8011baz 8 лет назад

can you link me to the video ? XD this guy is awesome !

@imran4968 8 лет назад

shah8011baz You should also watch Mathew Moniz first because that one was hilarious too and you should also sub to Mathew Moniz channel since he is an amazing RU-vidr.

@pustelnick 3 года назад

I just changed the batteries in this model today and ... thanks to this film everything went well. greetings from Poland, all the best! :)

@priathamtron 3 года назад

where you bought the battery and how its holding the charging

@pustelnick 3 года назад

@@priathamtron In Deep Media (Szczecin), not original battery, but her quality is very good. on a single charge it keeps about 6 hours of continuous work.

@horussanchez356 8 лет назад

I'm waiting for the teardown of the htc 10. Great video by the way! Best regards from México 👍

@JerryRigEverything 8 лет назад

+Horus Sanchez It'll post on Monday. Gracias por ver mi videos! Te espero Lunes.

@jorgeszabo1659 8 лет назад

+JerryRigEverything No sabia que hablabas español. Saludos desde Argentina!

@JerryRigEverything 8 лет назад

Jorge Szabo jaja, si! Hablo. Y gracias.

@paulusmaximus8284 Год назад

I had endless attempts to re-attach the fingerprint recognition - Eventually I got lucky. Good video though! Love the speed and simplicity.

@frakman1 5 лет назад

Why is the LCD display also removed (the four different sized screws). It doesn't look like it interferes with the battery removal. Can't I just leave it in place while I replace the battery?

@luan87us 5 лет назад

Can the battery be replaced without removing the lcd cables and shield? As long as I can make sure there wont be any stress on the cable.

@Guest-gy9vp 5 лет назад

Good Question. I hope somebody answer

@miko007 3 года назад

thats absolutely no problem. there is really no point in removing the screen assembly. i have no idea why he sends people through that hassle, as it is extremly difficult for the regular user without proper equipment, to keep the screen connectors as clean as they need to be. then they will be stuck with stripes on their screen, because they do not know about isopropyl alcohol and what is causing the behavior. just be gentle with the screen. it allows for quite a bit of movement without breaking anything.

@Cooldrums777 3 года назад

@@miko007 Now that I replaced the battery as was shown in the video I have come to the conclusion that you are correct. There is no reason to remove the screen. just open the screen up to 90 degrees and have someone hold it there while you remove and replace the battery. Obviously the battery cable and fingerprint sensor cable still need to be removed. If nobody is available to hold the screen you will need to prop it up against something to hold it in place while you struggle to peel out the old battery.

@robhill5578 3 года назад

Followed the video instructions..... The phone would not come apart even with the tool provided and suction cup. Had to use a craft knife blade. got the ribbon tabs off ok. Then came the battery...The sticky tape broke immediately. Had to destroy the old battery to get it out. fit new battery. Connected the ribbon tabs (What a palaver) Eventually got it all back together and was surprised to find the phone actually worked. Took 1 hour. Now to see if there is any improvement in the charge hold.

@ThunderDraws 4 года назад

Thanks Zach, this helped restore an old iPhone se

@abdulghanibonni7618 8 лет назад

i cant do anything with out you man thank you very much 😎

@JerryRigEverything 8 лет назад

+Bsher Bonni Glad you enjoy my videos!

@spicymusicpiano 5 лет назад

@@JerryRigEverything Why You disconected the screen? Is it necessary during battery replacement?

@timecat1174 4 года назад

@@spicymusicpiano it's safer, you don't want to screw up your screen connectors

@yaskoda 4 года назад

@@spicymusicpiano also its much easier than a heavy screen hanging

@vad161 Год назад

Nice video thanks. From Hungary

@TribitFanOpex 3 года назад

@2:49 "Get that crunch" -Phone repair guru

@BigBoyJay_69 4 месяца назад

At 0:17, you pointed out the screws at the bottom, but you don't take them out? And no need for glue or something at the end to put screen back in place? It just snaps back in?

@AC.onions 3 года назад

i just ordered a kit on amazon because it’s either $20 to do it myself or $50 for someone else to do it and then i have to listen to them trying to convince me to get a new phone (that i don’t have the money for). i’m anxious i’ll mess it up but this is giving me some confidence at least 😭

@v1d300 8 лет назад

J̶e̶r̶r̶y̶ Zach, you forgot to link the ribbon adhesive thing which holds the battery in place. That looks like something that could be used elsewhere too. Thank you .

@NothingNew777 8 лет назад

+v1d300 Who is Jerry?

@v1d300 8 лет назад

+Welcome to the real world the one who rigs everything.

@rishi0299 8 лет назад

+v1d300 he's not Jerry, he is Zach.

@v1d300 8 лет назад

+AlphaCrisptEch _ Oh lol okay. New subscriber, didn't know. Thanks.

@rishi0299 8 лет назад

v1d300 no probs😉

@justnvmnoname 8 лет назад

dude, you are awesome. thanks for the video&keep going. i love how your video is so simple yet informative. amazing

@manishgautam2424 8 дней назад

+ - of batter only to pcb , terminal toward flex is + or -

@juliava605 Год назад

Do the battery, tools, and directions apply to the 2nd gen (2020) iPhone SE or only the 1st gen? Thank you!

@faviolopez8536 9 месяцев назад

Could you please tell us what adhesive did you use? Thank you so much in advance!

@barryfulton7854 4 года назад

Jerry - thank you for your very concise video. I followed it very closely and I appear to have an (almost) successful battery replacement. I think I took about three hours all up - almost an hour getting the fingerprint scanner clip back on. One question - my flash / torch does not appear to be working after doing the battery replacement. I’m guessing I have disconnected something- any idea what I might have done? Thank you!

@pierrebalian3915 4 года назад

Do you have to disconnect the digitizer harnesses to replace the battery? Seems like you can just disconnect the battery harness the adhesive, and just remove it.

@stradaveriusfiddle 3 года назад

Awesome! You make it look almost do-able for some of us mere mortals. I think I can, I think I can! 🙏

@dpher1 3 месяца назад

Is it still waterproof?

@Glitcher2000 2 года назад

Is it a bad sign when the old battery starts SMOKING when you try to remove it? The adhesive strips broke immediately, so I had to bend and puncture the battery just to get at them. A lot of noxious smoke started emanating from it, but I still got the damn thing out eventually.

@craigweston2399 Год назад

thanks. went very smoothly! great!!

@Rick-se5qm Год назад

Getting the battery to release as demonstrated was impossible. Prying up the battery as shown did not work either. I know this was risky, but using pliers to extract the battery was the only way and even this was difficult. After removing the battery I placed it on the concrete floor where it started to smoke then went up in flames. No worries, I got it done, in spite of the battery exploding.

@whywontthisshitfuckingwork Год назад

This video is good. It's has all the right steps and tools, and the explanation is accurate. That said, the repair process is brutal. For instance, the adhesive he mentions is a complete nightmare; the video doesn't do it justice. I ended up having to remove the battery with brute force, which was rather dangerous. Also, the tiny screws and ribbon cables are uncooperative and cumbersome to attach. Considering that replacing your battery may not solve your problem (for me, it didn't), viewers may want to consider if the juice is worth the squeeze before starting any maintenance.

@isidroponce742 Год назад

I want to know i can change iphone se battery yes or no, it is not interchangeable or it going to mess up iphone se when i replace the battery ! ?

@andrewmartin4258 3 года назад

So I changed mine at 72. Little screws are tough but the connectors snapped back in surprisingly easily. Forgot to get adhesive and had it apart so I used rubber cement. 🤦‍♂️ Any real concerns?

@ryanbutler8306 7 лет назад

Hey, not sure if you'll see this comment, but i was wondering if a dent in the back of the SE is dangerous in any way. i have a pretty decent sized one right below the glass on the back on the side that the battery is on. Do you think it's worth it to open it up and A) make sure the battery is okay and B) press the dent out? Thanks!

@childofchief2290 3 года назад

adhesive snapped and battery is struggling to wanna pry out

@biancoivan65 3 года назад

Thanks so much, greetings from Italy :-)

@ClaireRichardsRN 5 месяцев назад

The link for the Fingerprint scanner metal latch doesn't work anymore

@jessicasnaplesfl7474 3 года назад

Thank you for this wonderfully descriptive video that showed me why I WON'T be doing this battery replacement myself! What type of EVIL ADHESIVE is that "sticky-stuff" that becomes NOT STICKY as it's pulled from beneath the battery? I have to give Apple credit. I've been using my 11-year-old DELL MINI 1012 laptop with few problems since I bought it new in 2009 and I was becoming "cocky" about my repair ability due to this success. NO MORE! There are more mini-screws just to get to this i-phone battery 5than there are in

@jessicasnaplesfl7474 3 года назад

. . . (Cont'd.) "There are more mini screws just to get to this i-phone battery than there are in" . . . my entire computer. (Sorry - my computer was anxious to post this comment before I gave away any Mini 1012 secrets.). I'll stick to keeping my computer going and stay away from "simple" i-phone repairs. I must admit, I was fascinated by the complexity of this battery replacement and the apparent devious Apple culture, where they seem to go out of their way to make i-phone repairs proprietary.

@Dan-ck4bg Год назад

@@jessicasnaplesfl7474 Jessica, you should author some books, if you haven't already. You're very entertaining and you write well. 😃

@jessicasnaplesfl7474 Год назад

@@Dan-ck4bg Thanks for the compliment, Dan, but any books I'd write would likely be BANNED!

@PMR517 5 лет назад

I learned from my attempted repair that some things should be left to experts. The Legos metaphor is so wrong and unfortunate. With the cable connectors, you get one or two attempts before the connection gets damaged or wears out. That's what happened to me with two or three of the connectors and I ruined my phone. Also, most of the screws are about the size of the tip of a ballpoint pen. Maybe it's because I have big hands, but some of the connectors were very difficult and impossible to get back on and the screws were impossible to get back in. But that was a moot point since the phone was already ruined. Paying Apple to replace the battery would have saved me over $200 and a lot of stress.

@Chridafirst 3 года назад

This guy is awesome

@fcaughli Год назад

Mine says SE right on the back. But it is different than this. I don't want to damage this. There is no cable for the bottom button. and only one cable at the top for the screen. And the area next to the battery is completely covered with black plastic. Where can I get info on this specific version?

@Mr.Kim.T 8 месяцев назад

Thank you. Job done. 👍

@Kawika9 3 года назад

Fingerprint scanner metal latch doesn't work anymore.

@jbinroom2038 5 лет назад

You helped me install my new battery!

@crispinmanugasjr.3034 Год назад

Thank you . .

@AsadKhan-lm6yr 3 года назад

You are a legend!!! Thanks so much!!

@Uniquaization 4 года назад

@JerryRigEverything thank you so much! Worked perfectly!

@belialblack3182 Год назад

Very helpful!

@muCephei_ 2 года назад

This guy makes it look so easy. Also, how can you not appreciate that this video is only as long as it needs to be.

@jashtonhill 5 лет назад

paid $14 for a new battery on amazon. Watched this video. It's like I have a brand new phone. (for now, of course)

@evankirk5937 3 года назад

How's your battery now? Mine lasted a year. Going to replace again!

@Mann_of_honour 3 года назад

What battery was this?

@saulkravitz Год назад

Very helpful video. Patient survived the surgery. I struggled: 1) Getting case open. I ordered the recommended tool. Only after I heated the phone with a heat gun did I manage to get it open. 2) removing the old battery. Had to resort to brute force. 3) inserting 6 tiny screws....quite a challenge. Total time: ~ 1h 45m

@KennethGundersen 4 года назад

So strange that they place the battery in the middle of the phone like this. Back in the good old days you could simply open a slot/door back on the phone to get the battery out.

@Schralpski 3 года назад

This makes me love RU-vid. Just replaced a battery in 30 minutes that has been failing for months. Saved money and kept my old phone thanks to you! I still like the size and shape of the SE more than any other iphone.

@justiceforallthepeople2642 2 года назад

Same.. about to buy second one

@hawaiirealmedia5610 5 лет назад

EXCELLENT TUTORIAL. Took me about 1.5 hours because I did it slowly. DO NOT RUSH THIS JOB. Take extra time and do it slowly and methodically. Worked perfectly. If you rush, you will lose the teeny tiny itty bitty screws. Wear powerful reading glasses for magnification.

@jheighten7568 4 года назад

Jerry, Could you confirm if I can put 1850 mAh instead of 1650mAh.I have seen both batteries marked it for the same iPhone SE First generation.

@PikaStu666 3 года назад

This is the most stressful thing I’ve ever done... I reckon bomb disposal is easier. Never mind the incredibly tiny screws, fiddly cable clips, the sticky strips both snapped with minimal force... Now if that happens to you, get a top E string for a guitar and get it under the battery, pulling it back and forth as you work your way along the battery, like a lumberjack’s saw. That’ll cut through the sticky stuff in no time!

@lien1026 2 года назад

Thank you so much because of you I was able to change my battery without a hitch. But it’s more than just that the way you explained everything and were so concise yet very easy to understand is unbelievable. This is one of the most helpful videos I’ve ever seen in terms of repairing anything let alone a phone battery. I can definitely see why you have so many subscribers and now I’m proud to say I am one as well thank you so much

@stockholm2375 2 года назад

One of the best repair videos I've ever seen. Was able to extract my old battery fairly easily, though that adhesive is a massive pain. I had to remove the headphone jack to get enough room to remove it, but it eventually came out without too much of a fight.

@stefanoballiero8319 6 месяцев назад

Of course... Thanks to this splendid tutorial I threw a phone that was still in excellent condition in the dustbin.... There is a fundamental piece of information missing which on ifixit is in large letters, the 4 screws on the display are all with different lengths (tenths of a millimetre) ) and if the exact position is not respected the logic board will break. Here he took them off and put them back on without underlining this aspect, you have to note the position or possibly have some luck that I didn't have.

@thatguy3213 23 часа назад

@@stefanoballiero8319yes that the reason doing your research is important… if you looked at the ifixit guide you woulve known how to fix it correctly and just cross checked the video 💀

@ChiahuLee 4 года назад

Thank you for this video, everything worked perfectly. We were two though, done in half an hour. Taking the adhesive was definitely the tricky part.

@michaelhartner1284 4 года назад

Thanks for this video. Very good job. The last link doesn't work, the fingerprint scanner latch. Question: I understand aftermarket batteries vary in quality. Are you comfortable the one that you linked is among the better ones? Thanks again!

@billiebobbienorton2556 Год назад

🚩WARNING - MAKE SURE YOU PUT E A C H OF THE SCREWS BACK IN THE EXACT HOLE THAT IT WAS REMOVED FROM ! ! ! Otherwise you will damage the circuit board. Ask me how I know ! ! ! ! ! ‼ Recommend you make a diagram of the inside of the phone and lay each piece/screw your remove on it exactly how you removed it!

@MattSmith-ks2lc 4 года назад

Instead of double-sided tape, I recommend using the 3M's Command Strips.

@Zero.X Год назад

Since I replaced the battery the Home button isn't working anymore, I took the cable off and but in on dozen times but still dont work, the first message i get every time i start the phone, is Touch ID not working.

@mariano4617 2 года назад

Thank you for the quick and simple tutorial! It was very helpful for my 1st gen SE iPhone. I was in and out in about 30 minutes. Putting back the screws were the biggest headache for me! The tape ripped so I grabbed my wife’s hair dryer to heat up the back of the phone and I pried the battery gently until it came out. Once again, thank you!

@timbottrell1616 5 лет назад

Thanks, $10 fix and it took me 20 minutes. However, I believe I damaged my volume up and down connection by being too rough with battery removal. Listen to the video closely and be careful when removing the battery!!!

@jlui21 4 года назад

- spent 2 plus hours. Screwing up the sticky stuff added 30 minutes. Using a blow dryer to heat up (carefully) the glue was the key.

@mikerigley1 3 года назад

The volume controller ribbon can get damaged as the port tool is used to open the case - I know this the hard way! So check on the video exactly where the ribbons are first.

@hansg6336 5 лет назад

Finally, some excellent camera work and voice over instructions. Well done.

@janne639 4 года назад

I agree. This was a great tutorial. Crisp, concise, coherent and comprehensive.

@srikanthnarayanan Год назад

When putting in the replacement battery, is adhesive really necessary? It seems like the batter has no where to go...

@indrekpaadik2073 3 года назад

The trickiest part for me was getting the tape out....i ended up completely destroying the old battery. But thanks for the video!

@PearCoin124 3 года назад

i think my old iphone se 2016 started boot looping because of a bad battery

@cobra3289 2 года назад

Very simple, short, easy to understand video. Replaced my battery, took a little while but it was successful. If you can pull out the powerstrip its probably no need to disconnect the top 3 connections. Thanks for sharing.

@annonymous5677 4 года назад

Are iphone SE batteries compatible with 5c or 5s ones?

@yakarotsennin3115 4 года назад

No they aren’t interchangeable

@oakhillsofwillishoa737 4 года назад

Thanks for the play by play. My home button is not working after replacing the battery. What could I have done? Help?

@Passi008 4 года назад

Please help me! I pulled very hard on the suction cup because I couldn't get the screen out and it made the screen crack! Is there any chance I can still get it out without further damaging it?

@zlatkajupe 4 года назад

Wowww I'm not a friggin phone tech. Why isn't it easier than this

@ricdimarco1499 3 года назад

It worked! Took me like an hour and a half because the adhesive ripped (my advice is actually not to be *too* careful with it...it tore less when I was a little more forceful with pulling on it), but it was actually a simple process. Thanks so much, man. Saved hundreds.

@jamiepirie9758 2 года назад

yep you need to keep pulling and pull from the bottom of adhesive. keep the tension on it. saving money doing diy phone repairs is fun!

@luxetveritas4141 4 года назад

Greetings from England! Great video dude! Though it took you 3 minutes, it took me an hour and a half! But this guidance was great - thanks so much.

@janne639 4 года назад

Actually it didn't take him 3 minutes. The video runs about 3 minutes because he (wisely) left out the tedious parts. I get really irritated when tutorials show me the unscrewing and re-screwing of every screw in real time.

@MatthewGanley 2 года назад

What will happen if u don’t disconnect screen! Just seems easier just leave the screen connected & put the new battery in

@BonaFideWildLife Год назад

I like your thinking, yet you won't be able to unscrew the plate that covers the three ribbons that connect the screen to the board. 0:49

@TheMusicalOarsman 3 года назад

Thanks for the video showing the process. I was able to follow it exactly... including accidentally ripping the adhesive :P

@UnSimpluJucator 8 лет назад

I've managed to do this on my SE but after I replaced the battery, the screen keeps flashing while booting, for some reason this problem keeps draining the battery very fast and I don't know what the cause of that might be...

@jeffscomp 8 лет назад

I think some of the screws that hold the screen connector shield are longer and must be put back where they came from. You can damage the logic board if you put them in the wrong place. I think the two longer ones go in the two holes toward the top of the shield.

@MysticalBirchTree Год назад

I unboxed my new battery and it immediately starting spewing out fumes, guess im just not cut out for this repair stuff

@geoffreyscott1871 4 года назад

Excellent demo, thank you! I did break the tape - several times. But with gentle prying and tweezer work the battery came out.

@xxsuperjohn 4 года назад

Thank you so much for posting this. I changed my battery and charge port using 2 of your videos. My glue strips both snapped and in the end I heated up the phone on a hot water bottle and was able to lift the battery up just enough to get the strips with tweezers. Not an easy job. Also just to mention the 6 screws which hold the 2 metal plates are all different lengths from 1.2mm to 1.7mm so take care!! Thanks again.

@jodyw8713 3 года назад

Thank you so much for this video. I’m going to try it out very soon. My phone cost too much to just throw away for a battery problem after three years use. I got a battery for NZ$18 with basic tools. The newer iPhones are much too big for my wee hands. I really love this phone, but it’s become virtually unusable unless plugged in every hour or so to charge. Wish me luck.

@1NicholasInSeattle Год назад

Just came by from Yahoo Front Page where I came across your Tube vid replace thee iphone 6se battery. Do you have a Best place to purchase a new battery? What are the 'bad or going bad battery signs for these earlier i-phones? Thanks so much. We (You and I) may need to talk more later. I'm going to be creating a super special SHOW FOR EVERYONE TO ENJOY BIG TIME!!! I think you might make a 'wonderful addition' to-the-show when I do. *Cheers mate!* Great job!

@nileshsindamkar9993 2 года назад

Sir, I am having Google pixel 3 xl phone. It stoped working due motherboard failure. Google authorised service centre in India is asking 350 dollars for motherboard replacement. Its too much costly for me. I have seen this motherboard on ebay for 50 dollars. Plus around 50 dollars other expenses to bring it to india. If I buy that motherboard from ebay will it solve my problem. What will be your advise on this.. ? Please guide.. !! 🙏🙏

@tjmmcd1 Год назад

I see these replacement batteries for under $10.00 on ebay, but apparently you need specific tools to do it correctly and you'd better do it correctly. I would feel unconfortable doing it, even IF I owned the correct tools.The question is, "How much will an Apple store charge to replace it".

@emmanuel4816 6 лет назад

Yea I need a battery repair on my iPhone SE bec......*low battery 20%* a sh...*dead*

@justicejones5025 Год назад

My adhesive was cemented onto the phone, making a huge mess prying the old battery out. I ended up using pliers to force it out. It kinked, bent, was punctured and I'm hoping I don't get Lithium-Ion cancer in the near future from doing this... But?? I now have a brand new battery, hopefully giving me another 6 years with this phone... Thanks....................