No video :(

Is it Possible? A Large 16x20" Heat Press for Under $300?!?

Transfer Superstars Direct to Film DTF Printers

Подписаться 30 тыс.

Просмотров 18 тыс.

50% 1

Are you looking for a powerful heat press that you can use to print large quantities of fabric without spending a fortune? Check out this 16x20" heat press for under $300!
This heat press is perfect if you need to print a lot of fabric quickly and easily. It's a great choice if you're on a budget, and it's sure to make your printing process a lot easier. So don't wait any longer - order your heat press today!
We're always searching for the Best Heat Press for your buck. If you haven't watched our Heat Press Series, please checkout the link below.
We stumbled across this heat press and reluctantly it is one of the few presses that were under $300 for a 16x20" size!! We love the 16x20" size because it works best for oversized designs.
7 Top Wallet Friendly Heat Press Machines Unveiled! PART 1
• BEST Heat Press for DT...
This video will cover:
✅ Unboxing and Review of the 16x20 VEVOR Heat Press
✅ Pressure Test
✅ Heat Temperature Test
✅ Wash Test
💻⚡️Order Custom DTF Heat Transfers transfersupers...
💻⚡️Order a FREE Tester Pack transfersupers...
► LINKS MENTIONED
⬇️ More stuff you should check out
Premium Heat Press Pillows amzn.to/3WqmawM OR amzn.to/3gioPbb
Tape Dispenser amzn.to/3vKOVZj
Heat Tape amzn.to/3Ss7QC3
Infrared Temperature Gun amzn.to/3hJ94uG
Most Affordable 15" x 15" Heat Press on Amazon for $190 amzn.to/3h2trTa
[COMPLETE LIST] DTF Heat Transfer Pressing Supplies on Amazon amzn.to/3TUrZQT
Heat Press Recommendations (BUDGET)
PowerPress 15x15 on Amazon amzn.to/3SPWFWj
Geo Knight Digital Knight 16" x 20" Clam Auto-Open Heat Press shrsl.com/49tsz
Hatpress By Stahls' Hotronix 360 IQ Hat Press
shrsl.com/49tt3
► SOCIAL MEDIA
Instagram: / transfersuperstars
TikTok: / transfersuperstars
RU-vid: / transfersuperstars
Facebook: / transfersuperstars
Linktree: linktr.ee/tran...
► DTFPRO DTF Printer Supplies
Film dtgpro.com/cic...
Inks dtgpro.com/cic...
Adhesive Powder dtgpro.com/cic...
Printhead Cleaning Solution dtgpro.com/cic...
Printhead Cleaning Solution (Strong) dtgpro.com/cic...
Foam Swabs dtgpro.com/cic...
Syringes dtgpro.com/cic...
► CUSTOMER REVIEWS
Google g.page/r/CTcIk...
Yelp www.yelp.com/b...
Disclaimer: By making a purchase through any of our affiliate links, we receive a very small commission at no extra cost to you. This helps us on our mission to provide quality education to you.
#dtfprinting #dtfprinter #directtofilm #dtftransfers #dtflosangeles #transfersuperstars #dtfprint #dtf #dtffilmprinter #dtftshirtprinting #dtfmachine #dtfprinters #dtftransferprinting #dtftransfer #dtfprintertshirt #dtfmachineprinter

Опубликовано:

24 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 43

@LilyBecca 7 месяцев назад

I have a Vevor 15x15 Seven in One Swing Away press. I love it. I think I got lucky with it. I have used the mug attachment, and it works well. The other attachments (hat, plate) are a pain, and I never used them. I've had my Vevor for about 4 years now. I feel like I had definitely gotten my money's worth after the first 2 years. I ended up getting a separate Swing Design Tumbler Press because I love doing mugs, but my Vevor attachment only wemt up to 12 oz. I can now go from a shot glass all the way up to 30 oz, including two late sizes. I got a cricut hat press, which is great. I'm in the market now for a 16x20 heat press. I want a second one in case the 1st one breaks, and I have a 13x19 sublimation printer. I absolutely love making gifts for family.

@transfersuperstars 7 месяцев назад

Thanks for sharing your story. Happy to hear things are going well for you. We have had great dtf heat press results with clamshell presses. Have you tried DTF stickers on your mugs?

@MTaropatchkeikis Месяц назад

Bought it a year ago, never used it yet, but.... I think you showed it will help me with big and large prints.... Mahalo for sharing... Appreciate you...

@transfersuperstars Месяц назад

Glad it was helpful!

@Amyti 9 месяцев назад

What a professional review ! Thanks so much to this creator for such precisions, insights and tools he gave us here. I really enjoy this kind of engineer mentality and this technical meticulousness. I'm following this chanel right now !

@transfersuperstars 9 месяцев назад

Our pleasure! Thank you for following along.

@andrewwilliams2193 2 месяца назад

Great review. It looks like a great manual heat press, but the layout of the plate is awkward for a T-shirt as mentioned, but it would be good for something like a banner or maybe a bag or sweatpants if you are doing iron-on on those. I look forward to your other videos.

@transfersuperstars 2 месяца назад

Yes the shape doesn't work great for t-shirts, which is what a bulk of our customer's decorate. Thanks again for viewing our videos.

@ParanormalResponse Месяц назад

I bought two of these and within 8 months they started falling apart. Metal shavings all over the place as it just couldn't handle 50 shirts a day over time. It finally basically exploded during use and parts went everywhere. So that was 600 down the drain. Spent the 1600 and went to stahls.Quality means eveything.

@transfersuperstars Месяц назад

Glad you were able to find a better solution., This was definitely a budget press and you were doing way more volume then it could handle it sounds like.

@rabinawal5375 2 месяца назад

Could you test Iglobalbuy 16" X 24" Clamshell Heat Press Machine ?

@transfersuperstars 2 месяца назад

Can you link it please? We'll check it out

@jaberjaws00 11 месяцев назад

Thank you for this review. I was looking at this heat press

@transfersuperstars 11 месяцев назад

Glad I could help

@DonJuravin 5 месяцев назад

Thanks for saving us from another machine

@transfersuperstars 5 месяцев назад

Thank you so much for the tip!

@ShesTheBizFriend 11 месяцев назад

Just got one a month ago. The price is good for the press. Not a fan of the width being 20in. I wish the height was 20in and width 16in. Maybe it’s just my preference but hey, It’s getting my jobs done and that smell when you first turn it in did leave.

@ShesTheBizFriend 11 месяцев назад

😆I guess I’m not the only one. Wrote this review before I got to yours at the end. That width is awkward.

@transfersuperstars 11 месяцев назад

haha! same thoughts! It's such an awkward dimension. It would be 100x better if it was the other way around! But overall not a bad press for that price point.

@LanceMcGrew 4 месяца назад

Thanks!

@transfersuperstars 4 месяца назад

Thank you so much for your support! Happy to help.

@icandygraphics 6 месяцев назад

Thank you 🙏

@transfersuperstars 6 месяцев назад

You’re welcome 😊

@gerrywolfe2549 2 месяца назад

How far is the top plate from the bottom pads?

@transfersuperstars 2 месяца назад

We no longer have the press so we were not able to get measurements for you. Sorry about htat

@zayanaalvarado4734 6 месяцев назад

Do you know of any model that the temperature is uniform throughout the iron? Or is it variable in all of them?

@transfersuperstars 6 месяцев назад

There are a few out there but it really depends on your budget. A lot of the sub $300 models regulate somewhat in temperature. We do have a geoknight that is very consistent, you can find a video here for more info. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-hP1Cn6HLw2o.html

@LanceMcGrew 4 месяца назад

Apparently Vevor products are hit 'n miss. I too found their 15x15 swing arm from Amazon very disappointing and returned it. Their auto-mug press is just fine and priced below Cricut. Thank you for all the effort testing these various products.

@transfersuperstars 4 месяца назад

I think it just might have something to do with the physics of the swing away, it just requires premium parts and construction to work well, which low budget versions can’t handle. Clamshell presses have overall performed better than the swing away, at least for DTF Transfer applications, which require more pressure than many other applications.

@simplymaricreations 11 месяцев назад

Thank you for these awesome reviews! Would you be able to do a review on the Yitahome multifunctional digital heat press? It's on Amazon and has no reviews yet

@transfersuperstars 11 месяцев назад

We did a review because the automatic function caught our attention but unfortunately it lacks pressure. You can watch the video here. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-BBDere_0EOo.html

@simplymaricreations 11 месяцев назад

I saw that review this is a different heat press from the same company

@skrooge4186 11 месяцев назад

Bro, where do you get such cool drawings?

@transfersuperstars 9 месяцев назад

We'll be releasing a series of graphics soon. Sign up for the drop manage.kmail-lists.com/subscriptions/subscribe?a=V3JKEJ&g=YrPuXY

@tochoses55timz8 3 месяца назад

Thanks my brother

@transfersuperstars 3 месяца назад

No problem

@milesjones9690 9 месяцев назад

Are there any presses with the 20 inch deminsion in the other position that you recomend?

@transfersuperstars 9 месяцев назад

Not from Amazon. You may find a good vertical 16x20 on HPN. shareasale.com/r.cfm?b=1137072&u=3937689&m=77504&urllink=&afftrack=

@tpalmer1319 8 месяцев назад

How can you say a temperature difference of 50 degrees across the platen is not that bad? That's is horrible!! 330 degrees in one corner and 289 in another? That's totally unacceptable and garbage in my opinion!! Most quality heat presses vary maybe 5 to 8 degrees max. To say anything otherwise is misleading and biased.

@transfersuperstars 8 месяцев назад

Yes that much fluctuation and range is not good but if the platen hits our min 275f, then it works and we have wash tested. Most important is the min temp is hit and there is enough pressure. We recommend pressing our transfers between 275-325f. There are definitely better presses available but these are all budget friendly ones from Amazon. What you pay for is what you get. We use many expensive presses, these are entry level recommendations.

@DonJuravin 7 месяцев назад

Thanks!

@transfersuperstars 7 месяцев назад

My man! Thank you for supporting our channel!