Is the new Mx COOL ARIES grinder worth it?

Подписаться 39 тыс.

Просмотров 10 тыс.

50% 1

➡️ Buy here: prima-coffee.c...
➡️ coffeechronicl...
The new Aries grinder from Mx Cool comes with 83 mm conical burrs and a potent attitude. But is the grinder worth the hefty price tag? Find out here.
Please note that this review unit was provided by the brand.
➡️ Conicals vs Flats: coffeechronicl...
➡️ Instagram (coffee hacks and daily updates) / thecoffeechronicler
CURRENTLY ON MY BREW BAR
☕️ FILTER
Manual grinder: 1zpresso.coffe...
Filter grinder: amzn.to/3LTSyVY
Burrs (for filter grinder) amzn.to/3FVgMeB
Scale: amzn.to/3K9FdY1
Kettle: amzn.to/3z986gN
AeroPress Go: amzn.to/3Zyze3L
Water dispersion: amzn.to/42G45Op
Drip coffee maker: amzn.to/3U11OcV
Cone Filters: amzn.to/3Zr8Toc
Aeropress Filters: amzn.to/3LO5dcS
Beans: www.kaffebox.n...
🚀 ESPRESSO
Espresso grinder: miicoffee.shop...
Trad. espresso grinder: amzn.to/3Kb9EgI
Machine: www.breville.c...
Mini scale: amzn.to/3lBKcri
Tamper: amzn.to/3Kc5t3W
Travel espresso: amzn.to/3z9MEYV
Beans: coffeebros.com...
📢 Disclaimer: The links provided above are affiliate links, which are an excellent way to support the channel. While you don't need to purchase the exact products mentioned, using these links for your purchases helps me out.
As an Amazon Associate, I earn from qualifying purchases at no additional cost to you. Thank you for your support!

Опубликовано:

28 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 37

@Pallepilla 11 месяцев назад

Your reviews are always interesting and helpful to watch! Thank you It would be awesome to get your in-depth review about "Next Level Pulsar" 😊

@evacado1367 11 месяцев назад

Excellent and thorough review, thank you for your time 🍻

@coffeechronicler 11 месяцев назад

Great to hear!

@MagicLover822 11 месяцев назад

Dude i would even watch you reviewing chopsticks

@T.H.Kim94 11 месяцев назад

Great review as always! I wonder how this would be like on a commercial setting?(ie. constant back to back shots)

@coffeechronicler 11 месяцев назад

They are a little bit vague on this. Given that the Niche is often used that way with a weaker motor, I'd assume light commercial duty should be okay.

@T.H.Kim94 11 месяцев назад

@@coffeechronicler thanks for the reply!

@simonramsberg2277 11 месяцев назад

Hey I really like your content in terms of knowledge, engagement and style but can I ask you to increase the volume a bit? I like that you talk calmly unlike most shouting american youtubers but i find it very hard to hear on max volume if i have even the slightest noise nearby :(

@coffeechronicler 11 месяцев назад

Thanks for the kind words. Yes, I'll try to boost some decibels for the next one :)

@dabougi8063 3 месяца назад

Interesting - some other reviews say it is a stepped grinder (it snaps "into step" when locking) with about 25 microns, which is much. You are sure it is stepless?

@coffeechronicler 3 месяца назад

Yes, the unit I have tested is stepless. I don't know if they have changed it since then, but don't think so.

@dabougi8063 3 месяца назад

Wow, thank you for the ultra-fast response. On their homepage they say "Stepped adjustment with safety lock" and also "Stepless-feeling grind size dial" This is a bit misleading on their part. However, thank you for your content, got my 1zpresso K Ultra "because of you" and it is indeed great

@joroboam 11 месяцев назад

My man great video as always! Definetly not buying this one. Holding out for a filter coffee grinder

@puddingstar2340 11 месяцев назад

I’m browsing to see Option-O LAGOM 01 review Waiting for it.

@Val_Smith 11 месяцев назад

I wonder how does iit hold up to top conicals and hybrid grinders like Weber Key, Kafatek MC6, Versalab m4(or Titus/Hedone Honne) and Molar X and X2 and is it a Niche killer?

@coffeechronicler 11 месяцев назад

I don't have a direct head-to-head comparison at home with these titans, so hard to make a call. And you'll never hear me mention Niche killer, but more flavor separation, yes ;)

@infanteer7535 11 месяцев назад

any thoughts on how to decide between Timemore 078S and DF64 Gen2? For both filter & espresso

@coffeechronicler 11 месяцев назад

I only have direct experience with 064s and 078. But overall, I guess that 078s, like the other two, is offering some of the best value at its price points. A plus for the DF64 Gen 2 is the better dial-in range for espresso and more burr options. But hard to go wrong with any of these.

@Val_Smith 10 месяцев назад

Do you think it would be a good companion to an electric siphon? I Feel standard v60 filter coffee just lacks the body for me.

@coffeechronicler 10 месяцев назад

Don't think this grinder will be the answer. Try my Hario Switch technique first and see if that helps. That will be a lot cheaper than getting a new grinder :)

@Val_Smith 10 месяцев назад

@coffeechronicler I will try blocking v60 hole for immersion, but think the paper filter will not let oils and small ground through resolving in thin body.

@Val_Smith 5 месяцев назад

@@coffeechronicler thx did the stall and fall from on Hario switch it is good. Also got a dedicated 078 for pourover.

@Maybaby1959 11 месяцев назад

1400 bucks it should grind bricks dude.

@JohnB.G 11 месяцев назад

Interesting grinder but the build quality and price don't quite match IMO. Should be much closer to Niche price level..

@coffeechronicler 11 месяцев назад

Yeah, that's what often happens with start-up products where economies of scale can be challenging.

@Val_Smith 11 месяцев назад

When you see how much Molar X or Titus cost you might rethink. It costs around the price of Webber key, has better workflow. But if they would have priced it at 1000k they could dominate the market.

@Foolsauce 11 месяцев назад

@@Val_Smith yeah would dominate the $1,000,000 market.

@coffeechronicler 11 месяцев назад

They do seem to have a bit more of a premium build quality as well @@Val_Smith

@frederikblochwulff3325 11 месяцев назад

Dejligt med en dansk kaffe RU-vidr. Den accent fornægter sig ikke. Og det er okay 👍🏼

@coffeechronicler 11 месяцев назад

Haha, jeg prøver at moderere den ;) Men tak!

@brentroman 11 месяцев назад

Thanks for your review (as always). Saw this first pop up on IG covering one of the Coffee expos - and it looked really cool. Looks like it is well built, and does a good job. I guess if $ isn't an issue, then would look great on your countertop. I've been happy with my DF64V (and is less than 1/2 this price)

@coffeechronicler 11 месяцев назад

Thanks Brent! Yeah, after DF64V it's really diminishing returns on all parameters, so you have to be really into this espresso profile.

@brentroman 11 месяцев назад

@@coffeechronicler Yeah - I decided to get the DF64V in order to get an espresso-specific flat burr grinder. I already have the Sette270, which I like, and so can get conical profiles with that. And I use my SSP/Stepless-modded Ode for filter. (apart from when I manually grind).

@coffeechronicler 11 месяцев назад

The Sette is excellent for conical espresso, so it sounds like you have all bases covered. I currently run DF64V with SSP Cast and it's really the perfect allrounder with those burrs. Not to mention much less noise. @@brentroman

@brentroman 11 месяцев назад

One of the big selling points for me with the DF64V were that the stock burrs were those DLCs. I haven’t felt the need to swap them out, and while I do like my Sette 270, the DF64V is surprisingly quiet! Sometimes it’s even hard to hear if it’s on without any beans in the chamber. Pretty impressive. I HAVE felt though that the DF64V really benefits from RDT. Also- there really is a seemingly “seasoning” period with the stick burrs. Before I went through a bunch of beans, the static was noticeably more than it is now.