Тёмный

Isotherm Fridge - Step by Step Installation | ⛵ Sailing Britaly ⛵ [Boat Work] 

Sailing Britaly
Подписаться 39 тыс.
Просмотров 115 тыс.
50% 1

Boat Fridge Installation. In this video we convert an icebox into a refrigerator using a 12 volt fridge kit from Isotherm. We cover every step of the job, so if you are considering fitting a fridge to your boat, this is the video for you. 🔔 SUBSCRIBE➜ bit.ly/SBRU-vid⛵ Informative Sailing Videos!
📖 Be the first in line to receive our Financial Freedom PDF e-book, which explains exactly how we have been able to arrange our life so that we can go cruising, and how YOU can do this too!
➜ bit.ly/FinancialFreedomPDF
📖 Get a free PDF download detailing over 3,500 knots & splices ➜ bit.ly/knotsPDF
We installed an Isotherm GE150 system: www.indelwebastomarine.com/us...
For more information about this job, including a total price for all the parts needed, check out this post ➜ bit.ly/BritalyFridge❄️
Timestamp hyperlinks for your convenience:
00:00 Introduction
01:00 Choosing a marine refrigerator
02:07 Our fridge kit
02:38 Is a refrigeration essential on a boat?
02:55 Fridge kit unboxing
03:54 Pre-installation planning and installation overview
05:50 Installing the compressor / condenser unit
08:00 Installing the evaporator plate and thermostat
15:19 Wiring the thermostat
16:04 Running the conduit and power cables
20:06 Terminating the power cables
21:09 Connecting the wiring at the compressor / condenser unit
21:49 Connecting the quick couplings
23:46 Terminating & connecting the power cables at the 12V electrical panel
24:50 Testing the fridge
26:08 Finalising the installation
26:32 Conclusion
28:22 Outtakes
28:46 Time for a cold one!
⛵Sailing Britaly⛵ brings you the sailing shenanigans of Chris (British), Rossella (Italian), and baby Emma (Britalian!) Our mission is to help YOU achieve YOUR cruising dreams, while working for a better world.
🌳 Become a Patron ➜ / sailingbritaly
Follow us on Instagram ➜ / sailingbritaly
Follow us on Twitter ➜ / sailingbritaly
Like our Facebook page ➜ / sailingbritaly
Do you know someone who you think you would enjoy our videos? Share our channel with them ➜ / sailingbritaly
Thank you :-)
Fair winds!
Chris, Rossella and Emma 😊
--------------------
'Sailing Britaly' is a Helvellyn Ltd brand. Disclaimer: Due to factors beyond the control of Helvellyn Ltd, we cannot guarantee against unauthorized modifications of this information, or improper use of this information. Helvellyn Ltd assumes no liability for property damage, injury or death incurred as a result of any of the information contained in this video. Helvellyn Ltd. recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, open flames, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Helvellyn Ltd, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not Helvellyn Ltd. Disclosure: any links in this description may be affiliate links. If you decide to buy some items from them, Helvellyn Ltd may receive a small percentage compensation for having suggested the suppliers to you. (This costs you nothing) As an Amazon Associate we receive compensation for qualifying purchases. Helvellyn Ltd only recommends suppliers and products which we believe in, so there is never any conflict of interest.
Gear used to make this video:
Main Camera: amzn.to/2Pvbk6c (US) amzn.to/2BGGgdD (UK)
18-55mm Lens: amzn.to/2NRgPer (US) amzn.to/2AgLblO (UK)
11-22mm Lens: amzn.to/2BTIUNt (US) amzn.to/2CDt3UN (UK)
Microphone: amzn.to/2nZDPwk (US) amzn.to/2VgP4QD (UK)
Water/Shockproof Hard Drive: amzn.to/2o0BmSc (US) amzn.to/2CA5AUb (UK)
(Links support our channel)
#boat #fridge #refrigeration

Хобби

Опубликовано:

 

1 авг 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 206   
@haydenwatson7987
@haydenwatson7987 2 года назад
I just watched your fridge install video and there are some very easy things that you can do to increase the efficiency of the system. The compressor is variable speed and to minimize the total amps / 24h usage you want to run it at the slowest speed that will meet your cooling needs. The speed is controlled by the resistance in the thermostat wires. The typical mechanical thermostat will ussually have 1.5k-ohm which makes it run at max speed of 3500 rpm's. If you use 0-ohms, it runs at the lowest speed which is 2000rpm's. The other thing is to add a digital thermostat that measures the air temperature instead of the evaporator plate temperature, I use a common 12v Inkbird Tstat that costs less than $20. I then put a 0 to 1500 ohm pot on the line so that I can turn it up for when I am running the engine or shore power and down when on battery. On my system these changes took me from nearly 100-amps / day to 5--amps / day. A side benifit is much less annoying running. With the mechanical Tstat, it ran 5-min on and 10-min off 24/7 which was very annoying at night. Now it runs for about 20 minutes and shuts of for about 2-hours. I also like being able to see the box temperature from the digital display.
@SailingSarah
@SailingSarah 4 года назад
Thank you for thinking about us Americans to put the conversions in your video! I see so many Americans making videos using metric measurements and they don't even think about the rest of their own countrymen to put the conversions in their videos. Subscribed!
@SailingBritaly
@SailingBritaly 4 года назад
Welcome aboard! Chris 👍
@frankd2301
@frankd2301 5 лет назад
I have watched all your “how to” vids. You are very clear and articulate 👍. Thanks
@intheworld99
@intheworld99 2 года назад
Thank you! your guide has convinced me to buy and install a refrigerator on board my small sailboat. Very illustrative.
@markseabaugh4157
@markseabaugh4157 5 лет назад
indeed there is a knot for that and I have you to thank for me finding appx a yr ago it is the "icicle hitch" I found it after watching your video on hanging a hammock from the stays on your boat and had to have that on mine. I rec everyone learn that knot as it really will hold on an icicle. thanks again for sharing! always good ideas coming from Britaly!!
@tomb2390
@tomb2390 5 лет назад
Another useful and well edited video. Nice job Chris!
@davidsmith4363
@davidsmith4363 2 года назад
I used a vacuum to pulled string through the stern railing with several bends. Worked great
@cnc75adventures49
@cnc75adventures49 5 лет назад
You my friend help out guys like me who hate reading instructions plus all the great tips and trick they should be filling the fridge for your great tutorial thanks man👍👍
@SailingBritaly
@SailingBritaly 5 лет назад
I'm glad this was helpful Chad. Cheers, Chris 🙂👍
@christopherstewart5220
@christopherstewart5220 5 лет назад
Always very entertaining and informative, Thanks
@amarieshearer7613
@amarieshearer7613 5 лет назад
Your wife will like the fridge! Great job!
@SailingBritaly
@SailingBritaly 5 лет назад
Rossella is very happy with this modification! Thank you, Chris 🙂
@andymarshall4134
@andymarshall4134 Месяц назад
We are planning on fitting one of these. Super detailed video of how to do it! Thanks Andy 🙂
@SailingBritaly
@SailingBritaly Месяц назад
Our pleasure Andy, we hope you're enjoying a nice cold celebratory beer in the near future! 🍻 Chris (Plus Rossella & Emma)
@nearlynativenursery8638
@nearlynativenursery8638 2 года назад
another brilliant DIY video. Thanks again for sharing your skills. All the Very Best! Jim
@littleredhen3354
@littleredhen3354 2 года назад
Excellent how to. Very well done! Thank you for sharing!
@TampaTec
@TampaTec 5 лет назад
So many useful guides, best howto Sail boat channel 👍
@SailingBritaly
@SailingBritaly 5 лет назад
Thank you Paul! 🙂
@sdrcorbu
@sdrcorbu 2 года назад
Wow! Thorough! Chris may be the best Mechanic - Educator and Video Editor combined. Just so happens that this is the retrofit refrigeration unit that I decided on, and now my job will go so much better. Thank you Chris for a brilliant presentation!
@randyowens2717
@randyowens2717 4 года назад
From one engineer to another, nice job!
@SailingBritaly
@SailingBritaly 4 года назад
Randy Owens Thank you Randy, much obliged. Chris 👍
@svseaknsolotude3277
@svseaknsolotude3277 2 года назад
You are awesome!!! Thank you, just bought this kit and I look forward to cold beers!!!!
@lionelthundercloud
@lionelthundercloud 2 года назад
Thanks mate! Super useful! Greatly appreciated
@ascott6804
@ascott6804 5 лет назад
The conversion popups... most valuable!! Thank you soooooo much!! Didnt have to pause to google C* to F* !!!
@SailingBritaly
@SailingBritaly 5 лет назад
Thank you for the feedback! Chris 👍
@pierrevanderdeure8164
@pierrevanderdeure8164 3 года назад
Great vid’ very helpful thanks. I am now confident I can do the job myself.
@danielhoyle3546
@danielhoyle3546 5 лет назад
Great Video, Thank You.
@sailingvolupia
@sailingvolupia 4 года назад
Hello us again, was thinking of paying someone to fit mine but am going to give it a go my self now Thanks mate
@AntoneLostInAsia
@AntoneLostInAsia 5 месяцев назад
I learn something new everyday, thanks for the class! I wonder if you can do this for an on board freezer? I seen a guy that had like two lay down fridges and two freezers under the dining area seats , wow !
@davidtilley2168
@davidtilley2168 3 года назад
I installed a similar "fridge kit" on our previous boat and thankfully it was also successful but I do enjoy your systematic approach and attention to detail which made watching very entertaining. I routed my compressor pipes down under the fridge box and into the adjoining seat locker so I wondered why you chose the route to the side and down in the "wall' locker instead?
@calmauric8218
@calmauric8218 Год назад
Wow, 3.15a is very good. Better than some of the camping 12v fridges. - thanks for showing the isotherm setup. Was considering buying the bigger kit to get my built in freezer going.
@peterferguson3374
@peterferguson3374 5 лет назад
Tie wraps bag... inspired and so simple. Looking forward to solar install.. thanks!
@SailingBritaly
@SailingBritaly 5 лет назад
Thank you Peter 👍
@harrybloom9213
@harrybloom9213 5 лет назад
I dont have a boat and I dont need a marine refrigerator. But, Im watching your vid anyway! +1
@SailingBritaly
@SailingBritaly 5 лет назад
Hi Harry, once you've caught the bug it's only a matter of time. I'm sure you'll have a boat some time soon and in the meantime I'm glad you are enjoying our videos. Fair winds, Chris 👍
@theislandpackrat
@theislandpackrat 5 лет назад
You did a great job!
@SailingBritaly
@SailingBritaly 5 лет назад
Thank you 👍
@JKTCGMV13
@JKTCGMV13 2 года назад
Wow the cable tie tip was nice
@clayfarnet970
@clayfarnet970 5 лет назад
👍👍👍 always great money saving ideas.
@tombarker3608
@tombarker3608 5 лет назад
Another great DIY video. Honestly I thought you were going to remodel the boat and put in a giant refrigerator box. Cool that you can buy the compressor and cooling plate. Hi Emma, hi Rossella safe travel you three.
@SailingBritaly
@SailingBritaly 5 лет назад
Hi Tom, thank you! Yes the fridge kits are extremely handy and make refrigeration viable option on the vast majority of boats. I just gave Emma a peck on the cheek from you. 😉 Fair winds, Chris 🙂
@brianfogg5172
@brianfogg5172 5 лет назад
This was a very detailed and helpful video. I'd like to see more how to videos.
@SailingBritaly
@SailingBritaly 5 лет назад
Thank you Brian, we will have more videos like this in the future so tick on that 🔔😉 Chris 👍
@iainlyall6475
@iainlyall6475 5 лет назад
can't wait for that solar arch. good video.
@SailingBritaly
@SailingBritaly 5 лет назад
Thank you Iain 👍
@patrykszubert1891
@patrykszubert1891 3 года назад
Thanks for that. Great Manual. I learned new skill thanks of you.😍
@SailingBritaly
@SailingBritaly 3 года назад
My pleasure Patryk! Chris 👍
@jimbigner5902
@jimbigner5902 5 лет назад
Nice tidy job!
@SailingBritaly
@SailingBritaly 5 лет назад
Thanks Jim 🙂
@simonjconnor
@simonjconnor 4 года назад
great video and tips. I just bought the GE80 and will keep this vid handy when I do my installation. Cheers
@SailingBritaly
@SailingBritaly 4 года назад
My pleasure Simon, good luck with the installation. Cheers, Chris 👍
@markseabaugh4157
@markseabaugh4157 5 лет назад
sorry I can't resist that horn outtake was THE FUNNIEST best laugh I've had in a while. BTW the know is also called "stopper knot" or "iron fist knot"
@hectorsarraga2475
@hectorsarraga2475 Год назад
Nice video, you covered all the main points of the installation. Easy to understand and follow
@SailingBritaly
@SailingBritaly 2 месяца назад
🙏👍
@chrisryba6190
@chrisryba6190 5 лет назад
This was very useful. Thanks.
@SailingBritaly
@SailingBritaly 5 лет назад
My pleasure Chris
@drwindsurf
@drwindsurf 5 лет назад
Very cool. Thank you for this installation guide :)
@SailingBritaly
@SailingBritaly 5 лет назад
Thank you Jeffrey 😉👍
@garybarton8261
@garybarton8261 2 года назад
So glad I found this video! Just fitting the same thing myself and nowhere in the instructions does it tell you where or how to connect the temperature sensor wire from the thermostat. Has no idea thats what the little plate was for! Thanks
@chasfoster12
@chasfoster12 5 лет назад
Great DIY video, keep us the good work.
@SailingBritaly
@SailingBritaly 5 лет назад
Thank you Chuck 👍
@leadsocks
@leadsocks 4 года назад
Cool. Both metaphorically and literally I guess!
@SailingBritaly
@SailingBritaly 4 года назад
👍
@stevesheliflying
@stevesheliflying 5 лет назад
Great video. Thanks for sharing.
@SailingBritaly
@SailingBritaly 5 лет назад
Thank you Steve 👍
@mikehurley5052
@mikehurley5052 4 года назад
Good job that, a worthwhile improvement.
@SailingBritaly
@SailingBritaly 4 года назад
Cheers Mike, it's a big improvement to our quality of life on board. Chris 👍
@consumedbynature
@consumedbynature 5 лет назад
Great video Chris as ever. Hope you enjoyed your shandy!
@SailingBritaly
@SailingBritaly 5 лет назад
Hi there, thank you. I believe a cold beverage is always enjoyed more when you feel like you have earned it and I reckon anyone who installs a fridge will enjoy the first cold sip of whatever it is that goes in there first! 🍻Cheers, Chris 👍
@almath9987
@almath9987 5 лет назад
Thanks Chris good job and video
@SailingBritaly
@SailingBritaly 5 лет назад
Thanks Al 👍
@AndyUK-Corrival
@AndyUK-Corrival 5 лет назад
Lol love the outtakes...
@SailingBritaly
@SailingBritaly 5 лет назад
It wasn't funny at the time as I was rushing to finish before it got dark. All's well that ends well though and I got there in the end. 🙂👍
@paolobeducci4388
@paolobeducci4388 4 года назад
Great, great job, after this video I do it too
@SailingBritaly
@SailingBritaly 4 года назад
Buon lavoro Paolo! Chris 👍
@torstenbehrendt870
@torstenbehrendt870 5 лет назад
Like the cable tie tip
@SailingBritaly
@SailingBritaly 5 лет назад
Cheers Torsten 👍
@TheRealSasquatch
@TheRealSasquatch 5 лет назад
very neat install.
@SailingBritaly
@SailingBritaly 5 лет назад
Thank you :-)
@neilscully7930
@neilscully7930 5 лет назад
nice vid chris as always
@SailingBritaly
@SailingBritaly 5 лет назад
Thanks Neil 👍
@MRTNMARTO
@MRTNMARTO 4 года назад
Great video!!!
@SailingBritaly
@SailingBritaly 4 года назад
Thank you Martin! 👍
@tedthesailor172
@tedthesailor172 4 года назад
Excellent video. Many thanks for sharing. Nice boat as well...
@SailingBritaly
@SailingBritaly 4 года назад
Thanks Ted 👍
@mmanut
@mmanut 5 лет назад
Very Clean & Neat. Great Job‼️👍👍. Vinny 🇺🇸
@SailingBritaly
@SailingBritaly 5 лет назад
Thank you Vinny 🙂👍
@flyingdutchman6984
@flyingdutchman6984 5 лет назад
I'd like to say it was me with the horn in the outtakes, but apparently I am not the only tosser who's lost the plot. I ripped out my fridge over 25 years ago because of the amp draw. I also didn't have solar back then, so having to run my engine to keep my beer cold didn't make sense. With the advances that have been made it might be worthwhile putting one back in. I actually started with no interest in this video, and only came to see how much Emma has grown. As it turned out the video was informative, but I'm still left hanging for an update about Emma. Thanks for making this video Chris. I know it must have been a chore to accomplish on your own.
@SailingBritaly
@SailingBritaly 5 лет назад
Thank you Jacobus, you were the number one person in my mind when I talked about people cruising the world without refrigeration. It's good to know that it is possible, and you canning of fresh food using a pressure cooker is genius! Our solar panels will cover the consumption of the fridge quite easily and the panels are cheap and very reliable these days. Emma will be shocking everyone in a video soon, she has grown up so much! Fair winds, Chris 👍
@philskype101
@philskype101 5 лет назад
isotherm is a quality item.
@culinary8ew
@culinary8ew 5 лет назад
Cool content 😎. Thanks for sharing.
@SailingBritaly
@SailingBritaly 5 лет назад
😉👍
@SVImpavidus
@SVImpavidus 5 лет назад
Absolutely 🐓on mate! Best cooler video ever! Sort them hole saws out before you go south "screwfix". Seriously, a lot of work went into making this video its a great how to. Sail Safe. Ant & Cid xx (SV Impavidus) Shared !
@SailingBritaly
@SailingBritaly 5 лет назад
Thank you Ant & Cid, you guys appreciate how much work filming and the editing is more than most. Thank you for sharing and fair winds! Chris 👍
@sailingvolupia
@sailingvolupia 4 года назад
Love the cable tie tip, thanks mate
@SailingBritaly
@SailingBritaly 4 года назад
My pleasure buddy. 👍
@SailingBritaly
@SailingBritaly 4 года назад
My pleasure buddy. 👍
@sailingsilverwind
@sailingsilverwind Год назад
Thanks for posting this
@SailingBritaly
@SailingBritaly Год назад
My pleasure! Fair winds, Chris 👍
@sailingsilverwind
@sailingsilverwind Год назад
@@SailingBritaly I recently bought a Dufour 31 (abandoned) and this isotherm ASU seems to work perfectly after years. Curious if I can maintain it.
@adamsz5759
@adamsz5759 Год назад
MERCI !
@SailingBritaly
@SailingBritaly 2 месяца назад
Merci á toi! 🙂
@bryanyoutubechannel
@bryanyoutubechannel Год назад
Excellent presentation sir.
@SailingBritaly
@SailingBritaly Год назад
🙏
@sea4see
@sea4see 5 лет назад
Thx guys need to di same job to my boat!
@SailingBritaly
@SailingBritaly 5 лет назад
sea4see Our pleasure, happy fitting! 🍻👍
@sea4see
@sea4see 5 лет назад
Finally I understand how to replace my old fridge was quite a mistery! Thx again happy
@vikingrchronicles
@vikingrchronicles 3 года назад
You have a new follower! Nice job here! Hope to sail aroud you one day. Cheer from Canada.
@johnperry7534
@johnperry7534 5 лет назад
Hi mate thanks
@SailingBritaly
@SailingBritaly 5 лет назад
My pleasure John 👍
@steve0680657
@steve0680657 5 лет назад
Love the cable tie tip. #lifehack I've had a car boot full of cable ties because i cut the corner a few years ago.
@SailingPivo
@SailingPivo 3 года назад
Excellent video. Thanks for sharing. I noticed that you didn't talk about refilling the refrigerant. How often will you be topping her up?
@johnjohnson8531
@johnjohnson8531 3 года назад
Great installation I have 36’ Pearson Need to the same
@SailingBritaly
@SailingBritaly 3 года назад
Enjoy the installation John! Chris 👍
@Jim-ei2iv
@Jim-ei2iv 3 года назад
Excellent video, thanks! I'm considering installing the same unit you did, or one size down (the Isotherm 2010-ISCE) for my 3.7 cubic foot ice box. After a year, are you still happy with your choice? Does it cool well even in the hottest weather? I'm probably going with the air cooled over the SP to avoid having to install the special thru hull, as you said.
@AndyUK-Corrival
@AndyUK-Corrival 5 лет назад
Great video Chris, not got one myself and not sure I have the space but I know where to come if I do. Andy uk
@SailingBritaly
@SailingBritaly 5 лет назад
Thank you Andy 👍
@ageofconan
@ageofconan 5 лет назад
Very good diy video. Love it ! Moar please 😁
@SailingBritaly
@SailingBritaly 5 лет назад
Thank you! 👍
@davidbryant3131
@davidbryant3131 5 лет назад
I'm constantly chasing those damned cable ties! Thanks for the tip!
@SailingBritaly
@SailingBritaly 5 лет назад
Chase no more David! Cheers, Chris 👍
@R.E.HILL_
@R.E.HILL_ 5 лет назад
Dielectric grease on those compressor power connections... Only a suggestion... Nice work..
@phil955i
@phil955i 2 года назад
V.good installation. The only thing extra I would've done would be to lag the suction pipe as that can get condensation on it.
@marineengineerbudiriyanto.1969
@marineengineerbudiriyanto.1969 4 года назад
Very nice Video....nice Reference of kowledge find in this video
@SailingBritaly
@SailingBritaly 4 года назад
Thank you! 👍
@asfpd
@asfpd 3 года назад
Fixing the thermostat capillary on ther evaporator plate causes the Danfos refrigeration compressor to cycle on/off. This reduces the chilling effect. I will explain, when the compressor runs the evaporator plate gets cold quickly, condensation forms on it's surface, which then turns to frost. The capillary, if fitted in contact with the evaporator plate, will be at the same temperature and it open-circuits the compressor 12V supply and the compressor stops. The evaporator plate soon defrosts and with it the capillary, the thermostat switch becomes closed, 12V supply to the compressor is restored and the compressor runs again. In practice, the compressor can be observed switching on/off every couple of minutes, depending on how quickly the evaporator plate frosts and defrosts. I will suggest this reduces the refrigeration capacity by as much as 50%, which may not be desired when plenty amp-hours are available. A better solution, which enables the thermostat to control the enclosed refrigerated space temperature more effectively, is to mount the capillary tube close to, although not in direct contact, with the evaporator plate. That's exactly what I have done on our sailing yacht and the unit works much better. i.e The Danfos refrigeration compressor runs for as long as it takes for the thermostat set-point temperature to be reached to maintain the desired temperature range according to the thermostat setting.
@ckh2815
@ckh2815 5 лет назад
Avoid drill breakout: Clamp a piece of wood flush and covering the outside of the hole being drilled. Or, with hole saws, drill one side half way through then finish the hole from the other side.
@hansvandekoppel1595
@hansvandekoppel1595 2 года назад
Very, very useful guide. Question: I connected the capillary hose second in stead of first. Will this be a problem when I will start the unit?
@benjaminpeters2518
@benjaminpeters2518 5 лет назад
Did you seal up the 3 holes in the left side of the ice box by the evaporation plate? Great installation of the refrigerator system in your boat.
@kevinhyde1477
@kevinhyde1477 2 года назад
Hi there, great video thanks. I don't suppose you remember what diameter hole you had to drill in the fridge side to pass the capillary and pipe connections through? And also on the compressor what direction does the fan blow? I'm just working out installation and wondering how to best place the compressor in order to get air pulled from a bilge area and warm air pushed out or my cupboard. Thanks again :)
@alansmith2203
@alansmith2203 3 года назад
Really enjoyed this installation. Is there a reason for this type of cold plate versus a stainless steel holding plate? After puncturing a refridge plate like you installed I have been leary of them every since. smile. Excellent install. Especially using the U shaped channels in the bildge to run cabling. Good job, mate.
@SailingBritaly
@SailingBritaly 3 года назад
Hi Alan, thank you. This kit gave us the best value for money of all the options we saw on the market. This is important to us, as we will cover in the video we'll publish later today about the costs of boat ownership. We'll take care not to puncture the evaporator plate, thank you for the warning. Cheers, Chris
@torstenbehrendt870
@torstenbehrendt870 3 года назад
Thanks for this video. I just bought my own cooling unit from this brand, but the manual doesn't say anything about where to place the thermostat sensor head within the box. Where did you place it in your box? Cheers
@redwood1957
@redwood1957 2 года назад
Lots of questions. But first thank you and you did a very nice job. Did that unit come precharged? You did tot have to evacuate the lines. Do you know the 24 hour electrical load when normal on board use. In apox 30 deg c. Thank you Mike
@CraigOverend
@CraigOverend 5 лет назад
Good job. ❄️❄️❄️❄️❄️ 5 Snowflakes for you 😎 Any concerns with the condenser being close to what looks like a heater vent outlet? It might not rain there but I bet it gets cold enough to use the heater a bit!
@SailingBritaly
@SailingBritaly 5 лет назад
Hi Craig, thanks buddy. Yes that is warm air heating ducting. I don't anticipate problems, as although the ducting gets warm, it doesn't tend to radiate it out very much (which is a good job otherwise the air coming out of the vent at the end wouldn't be warm any more). I will be monitoring this though, and if I think it is an issue I can wrap a fire blanket around the ducting and secure it with stainless steel cable ties. Cheers, Chris 👍
@psluhn
@psluhn 4 года назад
This video was great, am subscribed to your channel! I am starting to research the process of converting my icebox to a fridge and stubbled across your video, now I feel confident with installing it. Two questions, what made you go with Isotherm and I am trying to find your video on making sure the "now fridge" is well insulated, can you point me to that link.
@SailingBritaly
@SailingBritaly 4 года назад
You’re welcome Patrick! The Isotherm unit was the best value for our needs and we are still using it as per this video for now with no problems. When we go somewhere very hot we will increase the insulation with some spray foam. Cheers, Chris 👍
@joseville
@joseville 3 года назад
3:13 what are those connections called? Quick Couplings? And do you know if they can be installed post market? I'm doing some maintenance on my compressor (101n220 controller and bd35f compressor in a campervan) and would like to fit such connections to make future maintenance easier. Thanks for the great video btw!
@thehoboclub5060
@thehoboclub5060 3 года назад
It looks like you used spade connectors on the positive and negative cables. Would Anderson power poles also work?
@wysiwyg2006
@wysiwyg2006 5 лет назад
Would love one of those my my boats small coolbox but they are too dear for me
@simongoodall2418
@simongoodall2418 4 года назад
I have a similiar freezer that I want to do this to, it has the freezer box on one side like your one and a fridge on the other side of it. Would I need two plates or just the one be ok?
@STRUTZKOFF
@STRUTZKOFF 5 лет назад
might i suggest synthetic grease on the electrical connections to prevent corrosion
@hansvandekoppel1595
@hansvandekoppel1595 2 года назад
Question: I connected the capillary hose second in stead of first. Will this be a problem when I will start the unit?
@Timmygobang
@Timmygobang Год назад
How is the stainless steel joined? is it welded or have they used some gap filling epoxy? I need to line my fridge, but thought welding the seams would be way to hot and destroy the insulation behind it. Unless they made the stainless box first and dropped it in I guess....
@d.ruesch9064
@d.ruesch9064 2 года назад
I love your vids. Too bad you don't post anymore. :/
@rustytag4286
@rustytag4286 5 лет назад
at 26:52 you mean cubic feet - not square feet...but I am sure you know that. Great video...I will never open a bag of cable ties the wrong way again!
@SailingBritaly
@SailingBritaly 5 лет назад
That was a test to see who was paying attention, well done, you passed... (Only joking it was a typo) Your cable ties will now stay right where you left them, instead of trying to escape all the time. 👍 Fair winds, Chris 🙂
@christopherrichards864
@christopherrichards864 3 года назад
Hi Chris.. Very informative video. Just had my GE80 delivered. Was your power cables 2.5mm2 ?
@SailingBritaly
@SailingBritaly 3 года назад
Hi Christopher, I'm glad you found this helpful. There is more information in the link in the description (RU-vid do their best to hide this!) ➜ bit.ly/BritalyFridge❄️ "Red and Black, 1050 strand, tinned copper cable, 10 AWG [6 mm2], with silicone insulation, 10 ft [6 metres] of each colour ---------- $39.00 (Some left for future use)" We used 6 mm2 power cables to avoid voltage drop. Chris
@jimanderson2518
@jimanderson2518 5 лет назад
Nice job if I do say so myself. I think I might make a fortune once I get cruzing full time 345.00 Can$ Oops that's whole sale😉 .. The condenser ,as it is " called", is designed max for 90f condensing , so make sure you watch that temperature Not only do you break down the oil but your sub cooling temp will effect your efficiency and motor life . This is what ends up popping your compressor. Also check your voltage at the compressor while running (under load). Make sure your voltage Is in + - range . Another common issue . Other then that two thumbs up .. Enjoy your beers Fairwinds from the @captains.chair And yes that's what I do plus a few million BTU.😉
@ianwillcock6314
@ianwillcock6314 4 года назад
Hi Chris, great vid as I’m fitting same unit into my yacht cool box . I can’t insulate the outside of the box as no room and thinking insulating the inside with self adhesive insulation solar bubble sheets. Do u think that will work as haven’t seen anyone do that ? What’s your opinion. Cheers Ian
@SailingBritaly
@SailingBritaly 4 года назад
Hi Ian, are you sure there is no room to get some spray foam in around there? You can insulate the inside and anything you add will help. As long as you're happy with how usable the fridge will be with the bubble sheets I would say go for it - the only downside I can see is cleaning, but you could perhaps secure the sheet with velcro or something so that it can be removed for cleaning. Cheers, Chris
@ianwillcock6314
@ianwillcock6314 4 года назад
Hi Chris, I discovered by built in cool box had a gap between in/outer sides but not with foam inside just air. I drilled holes and squirted foam in but have also as you advised put the bubble insulation inside but loose so can be removed. I’m trying the fridge out in anger right now as I’m sailing from shoreham by sea to Falmouth and so far is keeping things cool, especially the beers, very well. Cheers Ian
@cnc75adventures49
@cnc75adventures49 5 лет назад
Lmao at that fog horn 🤣
@SailingBritaly
@SailingBritaly 5 лет назад
Yes there was a ship in the river who must have had someone in the way... Funny now, not at the time as it was a race against time to finish the video before it got dark. 🙂
@MattStibbs
@MattStibbs Год назад
Has it been a problem that the copper tubing is so close to your heating ducting?
@mathrodite
@mathrodite 2 года назад
I've never seen a case where the caps are not color-coordinated between the correct male and female. And to make matters much worse, the couplings seem to be identical. PS Fortunately, there is a difference. However, they should print on the user manual cover that only professionals should install this component system. (I notice that the manual does not state which models it's intended for.)
Далее
Recharge a Boat REFRIGERATOR [Capable Cruising Guides]
24:28
We Lost Our Boat- and I Want to Quit.
23:14
Просмотров 219 тыс.
Sailing Avocet | Building the COOLEST Boat Fridge!
18:05
Safety & Comfort Hacks for Life Aboard a Cruising Boat
13:09
МОЖЕТ ЛИ УКУСИТЬ СОБАКА
0:14
Просмотров 3,8 млн
Будни в пекарне. Часть 7
0:48
Просмотров 2,2 млн
World’s Largest Jello Pool
1:00
Просмотров 96 млн