J SERIES Honda Accord V6 P0747 TEST & CLEAN LINEAR SOLENOID | Odyssey Pilot Acura 28250-P6H-024

Подписаться 85 тыс.

Просмотров 85 тыс.

50% 1

Honda P0747 is an annoying code but 9 times out of 10 it's a bad linear solenoid. In this video I show you how to clean the linear solenoid before running out and buying a new one, try to fix what's brokwn before spending money on a new one.
‪@Honda‬ ‪@acura‬ ‪@HondaAccordguy05‬
LINKS ON AMAZON:
Linear Solenoid (always check for fitment): amzn.to/3cpRANU
All solenoids on transmission: amzn.to/30JBWuL
More About BundysGarage:
goo.gl/qv3Wzc
Questions, Comments, Concerns:
bundysgarage@gmail.com
Twitter:
/ bundysgarage
@bundysgarage
On The Web:
www.bundysgarag...
Music by Randall Kent: As seen on NCIS
• Randall Kent - Going H...
All Rights Reserved 2021
© Copyright 2021
Bundys Garage
All rights reserved. This material may not be published, broadcast, rewritten or redistributed in whole or part with out the express written permission. Contact: bundysgarage@gmail.com
DISCLAIMER - DISCLAIMER - DISCLAIMER
Due to factors beyond the control of BundysGarage, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. BundysGarage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. BundysGarage recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of BundysGarage, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the end user and not BundysGarage nor any of it’s subsidiaries.

Опубликовано:

28 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 75

@linkwaker10 4 месяца назад

Gonna give this a try on my 03 mdx thanks for the upload, got some hard shifting in transitioning between Reverse, neutral, and drive and the occasional hard shift while driving got 300,000 miles so wasn't not expecting a problem haha. Good to see I didn't have to touch the transmission mount.

@gloryboy6832 6 дней назад

Did this work for if not what did? Same thing on my 03 mdx can’t find the sensors only this part and a single solenoid outside help please

@uccoskun 9 месяцев назад

you could spray cleaner as you turn on and off the solenoids. You should clean the surrounding before removing solenoid packs, you have some dirty in the transmission now.

@sardoggy 17 дней назад

Super ecellent video. thanks so much for the post.

@Rusty-Shackleford69 Год назад

So, just because the pistons move doesn't mean they are any good first of all. Next, don't buy an Amazon knock-off unless you want to do the job twice. Finally, why not buy a rebuilt oem Honda? It comes with a new gasket and o-rings!😊

@dosmastrify 2 месяца назад

Where do you get one that's rebuilt?

@lastof4brothers 2 года назад

Nice video. I have a 2007 Accord with same v6 engine. I recently started having slightly delayed and harsh 1-2 shifting especially when engine is cold. It gets better when warmed up, but not best. I also noticed delayed 2-1 shifting. When slowing down, it tends to remain in 2 till I give it gas to move off, then it comes to 1. But absolutely no slipping. Oil is good level and not burnt, no much shavings the last time it was changed. I cleaned the solenoid, but it wasn't much dirty. Should I just change it? I don't want this harsh shifting to damage more things. Thanks

@No_Hookshot Год назад

If the selenoid isn't dirty, then it probably just means your auto transmission is in the first stages of going out. Have to remember, they are no more than internet plates with 'teeth' that eventually grind down and wear out over time. Best you can probably do at this time is try some lucas transmission fix and hope it hides the problem for a few k miles. Else, just drive the car until the tranny finally gives out and rebuild it or sell the car for scrap.

@exactbeast2378 Год назад

My car is having the same issues did you ever find out what was happening and how to fix it?

@tooththrhr 10 месяцев назад

You guys probably need to change the transmission pressure switches. There are two, a third gear and a fourth gear. Very simple job.

@lastof4brothers 10 месяцев назад

Update: so I've been having transmission issues for a year now. It was so frustrating to the point I nearly trashed the car. Several oil changes, tranny rebuild, tranny replacement, yet problem seemed to be getting worse with each effort at solving it. Ultimately, car will only engage 1st gear and will not make any effort to shift. Eventually, it was discovered that all the while, my problem was the ECU. Somehow, water from tha AC found its into the ECU and messed with it. Mysteriously only the transmission was manifesting. Every other thing in the car, including the engine ran fine. I'm just glad I didn't trash the car.

@tooththrhr 10 месяцев назад

@@lastof4brothers that's weird..but glad you got it fixed...

@Mike-01234 Год назад

Just picked up a 06 pilot saying the solenoid B is stuck. I changed the fluid 2 times first only got 2 QT's out though dipstick 2nd drain and fill about 3. The fluid that came out was nasty brown and smelled burnt. Transmission shifts okay ill give this a shot before I order any parts probably that screen.

@AyeThereGoMalco 2 года назад

My p0747 that I took to get a reading says it’s the pressure control solenoid… I changed this and still same results

@ExcaliburTTP 9 месяцев назад

trying to diagnose this now ill come back if i have an update

@Raeeban 4 месяца назад

@@ExcaliburTTP do you have an update

@ExcaliburTTP 4 месяца назад

@@Raeeban didn’t work swapped trans to used one- didn’t work scrapping the car lol These TLs are not worth the time unless you manual swap that auto trans is dog 💩

@hk3248 2 месяца назад

What is the metal “puck” looking thing above those solenoids?

@manuelmanjarrez4123 Год назад

What is the actual name of the steel pins I need two of them but I don’t know the actual name for them lol . Great video btw.

@drumtwo4seven 2 года назад

DAMN GOOD My code is P0780 Research suggests it's the transmission solenoid Your video helped alot seeing it removed other videos show it after removal with similar cleaning process Thank you

@whatitisnt. 6 месяцев назад

Update?

@mikeike7114 2 года назад

Hi. Is the company “Rostra Precision Controls” a quality aftermarket parts company? Also, if replacing the solenoid, better to go with a USED oem Honda part, or NEW Rostra part? Does it even matter? Thank you very much.

@Raeeban 4 месяца назад

How’d it go with rostra

@mostaphaali5938 2 года назад

Are the strainers the same size?

@timothygrant2831 Год назад

How many solenoids can be cleaned on those 2004 Honda Pilot? Thanks

@bundysgarage Год назад

A lot of them

@Ager_bombs 2 года назад

How much HP does this add?

@timtrottierii728 2 года назад

@Dannycation 2 года назад

@osvaldo37374 2 года назад

Dealer guy said around 69+ HP to the wheels if you clean it , but don’t quote me on that one

@JustColdStarts Год назад

the replies are funny af😂

@Pantherman1979 2 года назад

Is this across all the generations of The J-series? Asking because I saw the automatic transmission filter was only for 2003-2006.

@dhyde9207 Год назад

I would use an air gun and blow that whole area out before removing the unit so that all that dirt and crap doesn't fall down into those openings. Once they're into the openings, the next stop is your transmission.

@bundysgarage Год назад

Not really, a little dirt gets in is not the end of the world, but yes that is a god idea to blow it off with air before removing it.

@GucciGlocks 2 года назад

The brown one is valve B and black one is valve A. I know because I bought the oem part for my Acura TL ha ha great video.

@djbujub Год назад

Where would Valve “C” be? I got a code for valve C

@mkobd 2 года назад

What kind of movement are you looking for when testing? I tested mine, one of em goes back and forth, in and out, the other one rotates and has no translation motion.

@drumtwo4seven 2 года назад

You'll see a little piston looking thing move

@javiroo1743 2 года назад

Did you ever find out how much movement it needs to be ? Having the prob but no one says how much in and out. I’m testing now and get about 3/16” movements

@mkobd 2 года назад

@@javiroo1743 they should both click up and down, magnitude of movement i’m not sure but i just replaced mine with another one and it works for now. didn’t solve my tranny problems though.

@darcyhagberry6480 2 года назад

Mine has symptoms, but no code. Any suggestions?

@eaglerider94 7 месяцев назад

Did you resolve the issue?

@mikeike7114 25 дней назад

Hi. I don’t have a 12V battery handy to test the solenoid. How else can ingest it? Can I use a little 9V battery? Could that possibly damage anything? Thank you.

@tooththrhr 10 месяцев назад

I'm having an issue with a 2005 accord v6. I just changed the pressure switches and fluid, but the car still has a delay going from park to reverse and drive. Other wise the car shifts amazing. Is it the solenoid ?

@whatitisnt. 6 месяцев назад

Update?

@albertodavila3437 2 месяца назад

The twe of them are the same

@MultiRedneck66 2 месяца назад

I have the 2014 accord with the v6 thats having troubles shifting in 1st 2nd and reverse. If i replace the solenoid here, will it fix my issue

@truejey7475 2 года назад

Hey bud. There is a gasket for this solenoid. Do you recommend to buy it from honda and installed it? Thanks for the video

@bundysgarage 2 года назад

If it’s not ripped or torn you can use the old one

@ricardolarios5330 11 месяцев назад

How about if mine is gushing oil out of this are only at higher speeds ?

@Linuxman920 3 месяца назад

I just got a po741 torque converter clutch solenoid stuck off on my 2006 Honda pilot 4WD the other day. And the code I’m getting pertains to one of the 4 solenoids in the accumulator body. Which is under the linear one on the side of the trans

@joeeliff4233 Год назад

Thanks"👍

@dosmastrify 2 месяца назад

Mine moved but seemed like one moved more than the other.

@AyeThereGoMalco 2 года назад

Soooo the filters you see how you have 3 and a big 1 ! I only have 1 screen filters and the rest and all through??

@christhomas7085 2 года назад

I bought a used odyssey and the middle tube has no strainer, or it was lost. What would happen without the strainer? Getting P0747 solenoid A stuck on code, is this the correct one to even be looking at?

@playharder1435 5 месяцев назад

it has a filter, but it is inside of the transmission -- requires disassembly

@jerequan1282 2 года назад

Would I have issues or premature transmission failure due to purchasing one of the cheap $60 solenoid replacments online?

@bundysgarage 2 года назад

Hard to say. Did you buy it on eBay? Lots of counterfeit parts floating around on eBay. Ever since the beginning of time there have been scammers and there still are in 2022.

@Fiat-Domine 11 месяцев назад

Have a new to me 2005 Accord V6. Hard shift from 1st to 2nd if you accelerate rapidly from a dead stop. Found your video and decided to check the linear solenoid. Apparently someone had it off in the past and forgot to put the long pipe/tube back in. (Part # 22743-PW4-000) It was missing. Three small tubes looked clean but I flushed brake cleaner through them anyway. The solenoids both worked fine when tested as you demonstrated. Could the missing tube be responsible for the hard shift? Does it help control fluid pressure in the linear solenoid or is the fact that it's missing no big deal?

@bundysgarage 11 месяцев назад

I don't think they control line pressure, they have little screens so they are tiny tiny filters. Most likely, your solenoid is bad.

@Fiat-Domine 11 месяцев назад

@@bundysgarage Installed the 8x40mm pipe (the one without the screens) and it seems to have resolved the shifting issue. At least, I haven't been able to replicate it. No idea what that long tube does, but having it installed helped.

@tooththrhr 10 месяцев назад

@@Fiat-Domine that's really weird that it was missing...what the Heck

@Charlie-xh4db 10 месяцев назад

THANX 🫡👍

@javiroo1743 2 года назад

How far is the pistons soposed to move?

@ghostjr7234 Год назад

Is this the same thing for a 2014 Honda accord jseries?

@JustColdStarts Год назад

bro doesnt know

@mbs5328 2 года назад

Hey, Mr. Bundy, I don't see the info for the Honda/Acura salvage yards. I'd like to check that out. Where are they?

@bundysgarage 2 года назад

Here you go: Honda & Foreign Auto (951) 686-8486 goo.gl/maps/TARxuNXRJPvuFmRx8

@toadcc 2 года назад

@@bundysgarage I need your help because it seem as you've done alot of work on the j series engine/car. I'm having a no crank when I turn the key. Starter is good, battery is good. There is no fire in the small wire(signal wire) that run to the starter when you turn the key....NEED HELP.....

@bogdantoysreviem7193 6 месяцев назад

I checked salenoidi they were clean I cleaned them again I changed the oil but still when accelerating from c4 to 5th gear beats transmission what to do can the transmission is already dead ?

@bundysgarage 5 месяцев назад

Did you test them out of the car and actually see the plunger move back and forth?