Jacquard Products Presents: Tying and Dyeing the Centered Rainbow Spiral (Pt.1) 

Dyeing is my life

🤬🤬

wedding song sameer chohan I wanna die too! This is different tho- 😑 They color a shirt to die?

is the shirt wet before you start? and also is the sodium mix necessary?

@@lindapecaj4570 Yes you need to let your shirt soaked in soda ash for at least 20 minutes or so, in my personal experience I let the shirt in soda ash for about a day after that I squeeze the excess of water from the shirt but it is still wet, so you start making your spiral or your pleats, use the rubber bands but stretch them enough to get a rounded spiral so that way you will get more dye into your shirt, If you don't stretch the rubber bands the tension will make your spiral like a ball so it will be harder to get more dye into the pleats, I mean it depends on the result you want to get, in my case I rather very saturated dyes so I make my spirals rounded and extended. after you dye your shirt let it seat in a plastic bag for about three days, that's what I do, but you can just wait 24 hours, that's enough, you take it out from the bag, you rinse it with clean water until the water comes clean and you let it dry! That's it. Add me on Instagram I'm starting on this too! but I love it: @atsuko_san19 you can add me on skype too so we can share tips and results! dan.atsuko Have a great day!

What are the SUPPLIES!!!!!!!!!!!!!!!!!!

www.jacquardproducts.com/funky-groovy-tie-dye.html www.jacquardproducts.com/procion-mx.html

David Briseno Michaels craft stores or on Amazon

Love these dyes! They are bright and stay bright after several washings. Found them on Amazon.

R Dray hey could u send me the Amazon link of the dyes ? thanks

บ่วนี่บึ้บักืนีแทาเยพพ้ีด่บีเาต้รัยระนนรักนน้ายีตัน

When it says 6 years ago

You've got to use Jacquard Procion MX dyes with Soda Ash. The brightest and most permanent colors in the world!

lmfao

😂😂😂

The same

nice

winogirlll 😂 lol

👏👏👏

hello , i m like

jacquardproducts is this batik celup from indonesia??

I do believe this Indonesian culture "Batik Celup ikat"

YOUR AMAZING IN YOUR TUTORIAL YOU HELP ME MAKE A AMAZING TIE AND DIE T-SHIRT PROJECT YOUR AMAZING

What is the name of colour ???

+Anna Haber Old question but thought I'd answer it. I soak my fabric in the soda ash water for 30 minutes but can go longer. You can let the shirt drip dry and then fold, but I find it much easier to go ahead and tie it and apply the dye when it's wet. To make the soda ash solution the water needs to be warm to dissolve. The dye water doesn't need to be warm. You need to let it set for 24 hours before rinsing and washing.

Hello, can you please explain to me the process?

What is soda Ash?

Caustic soda and hydrosulphate are the main ingredients for tie and dye.without these ingredients the colours will fade away,am talking from a Nigerian perspective.

Hobby lobby has soda ash you soak your dry shirts in it for couple hours are after 24 hours and it keeps the colors from fading so so good and so - rang it out wrap it up to whatever shape you want it to be and then start putting color on it

Hola con respecto al lavabo la primera vez lavala con un poco de sal para que no se pierda todo el color

Tammy Antonella si y si! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ZOBCSVLsW6c.html

+thealg101 That's really odd, that shouldn't happen...maybe you need to do a gentle wash...

At The end of The video she said: "now we wait for 24 hours"

+Crazypanda thanks, next time i'll wait a little longer.

+Wolfmyth100 thanks for the help, i think my dye was a little old too :/

Katie Orr it is damp. We always pre-soak the fabric in a solution of soda ash and then wring it out before dyeing. The soda ash makes the colors bright and permanent, and it is easier to tie and bind a damp shirt.

Damp

Katie Orr. So Beautiful

jacquardproducts What kind of color are them? Acrylic colors?

jacquardproducts Tell me please what soda ash is.

eu tbm a minha ficou iradaa

eu tbm a minha ficou iradaa

The shirt is damp before dyeing--it should be soaked in a solution of soda ash. But the drier it is, the less white areas you will likely have. Also, using warm or hot water in your dyes will reduce white space.

thanks for the additional tips.

What is soda ash

@5-Minute Crafts Fuck you most of your crafts don't work

KingOfClash 727 🤣🤣🤣

it's dye

xD

+iCubaZ You can take your fingers and massage the fabric a bit to make sure the dye goes all through the fabric. Sounds like you just aren't putting enough dye on it.

Hello, as a good customized clothing company, we can customize tie-dye t-shirts, hoodies, sportswear and other clothes for you. We can also customize your own logo or badge for you. If you like, please give me your email, and I will send you the tie-dye attachment.

Omg SAME BECAUSE his silly vid 😂

Hahaha me too dude

Lol

me 2

DESPACITO

Puerto rico

La casa de papel

Mexico

Soda ash?? Que quiere decir

Soda ash is very important for tied dyeing. It is like baking soda but stronger. The shirt is damp when dyeing.

OMG YESS

My_sassy _self same

Youre an army too

Hobiiiii 💕💕💕💕

em que momento??

Isa Dora 😄😄

Jacquard Procion MX Dyes must be used with Soda Ash

store.jacquardproducts.com/procionmx

Jacquard Procion MX dyes / Jacquard tie dye kits.

Yes, let it sit for 12-24 hours, and then wash

It is optional. Urea will help keep the fabric wetter longer during batching, which can help produce brighter or deeper colors. It is often helpful in dry climates or when using black dyes.

Thanks

We do not recommend using fabric paint for tie dyeing. You must use fabric dye, and it must be the correct type. Next time, use the Jacquard Tie Dye Kit or Procion MX dyes.

The water does not have to be warm

Stick to Jacquard Procion MX Dyes for the brightest colors that last with repeated washing :)

www.dickblick.com/products/jacquard-procion-mx-fiber-reactive-cold-water-dye/

Thx 😊

Usually you pre-soak the fabric in a soda ash solution for at least 15 minutes. If you'd like to give us a call, we can help you figure out what went wrong: 800-442-0455

the link is in the bio :)

The fabric is soaked in a solution of soda ash prior to dyeing. This is what gives you bright and permanent colors. The fabric is dyed damp.

For long-lasting colors, you must use Jacquard Procion MX dyes with Soda Ash

Each "feather" or accordion fold will create a sort of stripe, so adding more of these folds creates a tighter, more varied design, often with more white space.