JB Weld Original Cold Steel VS JB Weld Kwikweld Head to Head Comparison 

Have you used JB Weld products before? What repairs have you used JB Weld for? What repairs are you looking at JB Weld for?

Kwik-weld is absolutely more convenient (if time is of the essence), but it’s worth noting that it’s less-than-half the strength of the original cold steel once cured.

I see that you just have to be ready to work Quickly with the Kwikweld....you have to know exactly what you are aiming for and get it done fast. The differences in set time is amazing...I am def going to get some Kwikweld...Thanks for this!!!

Thanks for this. I have something I need to JB Weld,🤔 that I'm not suppose to JB Weld,🤨 that I'm going to JB Weld. 😂

You can get the kwikweld in the tubes also and you can get the regular J-B Weld in the syringe I like the syringe style much easier to divy out and convenient and I've had it sit for a year after being opened and it still be good

thank you, needed this info!!

Thank you for this video, very helpful. Waiting to see if steel version will adhere aluminum to stainless steel where E 6000 failed.

What would you use to repair a small Crack in an air tank? Putty?

Could you do a JB Weld Strength test on a hardhat glued to an overhead structure to see if it will hold you off the ground as good as Super Glue?

theres tape, zip ties, super glue now jb weld. cant be beat.

I mix some steel wool in the mix for extra strength.Maybe you could do a test on this compared to straight job weld.

Both formulas are available in either two separate tubes or the double syringe.

I keep hearing people talk about how it holds up against heat, but I'm from Wisconsin and I want to know how it holds up against our COLD weather?

I think for a true head to head comparison the items repaired should be the same. But good video all the same.

That Prius trim piece has now officially become irreplaceable. Should have used a silicone adhesive, where you’d at least have a chance of removal without breakage. 🤷‍♂️

Is this good for radiator plastic ???

I'm welding my heater core pipe the pipe goes to heater core 2 small one it's leaking but very little because the seal isn't really matching 100% so will this join the pipe end to heater core ? Will it seal it ? The pipes do go inside heater core but the rubber or something making it leak there just little drips So my plan is put this inside the heater core ring and some around the pipe tip and fit them inside and put some more outside Plz let me know if this holds well and it's strong as they claim to be there is not much pressure but pipe might be little hot as its antifreeze going to heater core

I dunno which JB Weld company you used but mine did not bond at all. I got the Epoxy steel resin with the hardner. I was trying to bond a steel plated nut to a steel shaft on a electric motor. It never bonded and I was able to remove it with my hand after 24 hrs curing. I sanded the steel and put some acetone to make everything was clean. I did this 3 times with JB Weld. I tried 3 brands of metal glue but all the same problem. I tried super and gorilla steel epoxy and same problem. I solved the problem by getting it welded. I also was emailing JB Weld support and they check the glue and also the pictures and video I sent to them. They could not understand why it would not bond. Reply

Head to Head Comparison and then uses them for toally different things all this compares is the mixing step

Can this be used on the metal trim around my fire door where the trim split? Thanks.

what if you mix half kwik half steel

should avoid mixing on anything absorbent - use something like onion skins for vehicle body filer

Recently tried the jb clear weld fastening a plastic battery box holder to inside of metal detector thats aluminum, soon as I broken tab off the product it had the worst smell & just doesnt go away at all & if you get it on your fingers the smell will not be able to come off for days even using nail polish goo gone the smell will disappear days later by wearing away using your hands on doing things round the house, I think the bonding may have held up so far but again the smell on the repaired area is not going away at all it may be there for long long time.. If I ever use any epoxy glue again for any other repairs down the road it sure wont be any jb product no matter how well it works.. I dont understand why the manufacture doesnt disclose this on their products of the horrible smell it releases once opened & after applying the epoxy the smell can make you sick..

..lol.. Hardly a comparison video