Jeep JK Wipers and Headlights Turn Themselves On - TIPM Issues Definitive Guide

Подписаться 8 тыс.

Просмотров 18 тыс.

50% 1

Jeep JK Wipers and Headlights Turn Themselves On - TIPM Issues Definitive Guide is a collection of everything you can try BEFORE replacing your Total Integrated Power Module on your 2007-2018 Jeep JK. Does your Jeep JK seem possessed? Did it turn on its wipers and headlights all by itself and now they won't turn off? This can be caused by quite a few things, and we're attempting to make this video the definitive guide to testing the TIPM and related issues to solve this problem, and we need your help! Feel free to comment on any additional solutions or tests so that JK owners can use this video as a one-stop resource to solve this problem. If your Jeep is freaking out and seems like its haunted, this video will help you determine the cause and get you back enjoying the Jeep life. Join us for Jeep JK Wipers and Headlights Turn Themselves On - TIPM Issues Definitive Guide
#JeepJKissues #JeepTIPM #MotorsandMischief
Check out our store: www.motorsandmischief.com/shop
Link to our Airbag Clock Spring Video: • Jeep Grand Cherokee WJ...
Link to TIPM Repair Service: ebay.us/F0W6PJ
0:00 Intro and background on TIPM
2:28 TIPM Hard Reset Procedure
3:22 Check battery terminals
4:01 Grounds
5:03 Airbag clock spring info
5:40 Front sway bar disconnect info
6:25 Low battery voltage info
7:11 Fusible links
10:08 Checking fuses
11:29 CAN BUS error info and review of symptoms
11:57 Instrument cluster info
12:24 Removing the instrument cluster
15:00 Testing instrument cluster voltages
17:29 Professional diagnosis
18:32 What turned out to be our problem
19:13 Testing the repair
20:37 Coding procedure for replacement TIPM
22:00 How to remove the TIPM
25:57 Common Causes List to screen shot
26:58 Bloopers
Instagram: @mischief4all
Facebook: @mischiefmafia
Interwebs: www.motorsandmischief.com
Business inquiries: heyyouguys@motorsandmischief.com
Send us stuff: PO Box 901, Rathdrum ID 83858
🖥️✅ Follow Motors and Mischief by Subscribing to the Channel today!
→ / @motorsandmischief
🔔 TURN ON NOTIFICATIONS🔔
→ Jeep Project WJ Part 3: • Project Jeep Grand Che...
→ Jeep Project WJ Part 2: • Project Jeep Grand Che...
→ Jeep Project WJ Part 1: • Project Jeep Grand Che...
→ Jeep ZJ Project!!!: • Can We Turn this $1000...
→ MadRamps Review: • Mad Ramps from Dennis ...
→Follow us on Instagram @mischief4all for sneak peeks and behind the scenes
-Motors and Mischief

Авто/Мото

Опубликовано:

4 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 71

@AndrewMorgan-yp7mx Месяц назад

You saved me with those two stupid grounds next to my break pedal! Thank you so much for this video!!

@MotorsandMischief Месяц назад

Glad I could help!

@wildbrosNW 2 года назад

Thats a lot of great info. Anytime someone is willing to document difficult fixes its appreciated, thanks!

@angryjohnnee Месяц назад

Just started having an issue like this - and this video is fantastic! Thanks for being so thorough! Very impressed with the level of detail you put into it.

@MotorsandMischief Месяц назад

Thanks so much for commenting. Really glad it helped!

@robertcourtney6913 2 года назад

This is a very nice in-depth guide, thank you for putting this together!

@MotorsandMischief 2 года назад

Thanks for the comment!

@jeremyvailes6285 Год назад

Thank you for all the detail!!! Amazing job!

@MotorsandMischief Год назад

You are so welcome! Really glad it helped. Thanks so much for commenting!

@yolaa23 6 месяцев назад

Wow!! Absolutely awesome!!! Thank you!!

@MotorsandMischief 6 месяцев назад

So glad it was helpful :)

@jojik1452 Год назад

Useful info. Thank you

@MotorsandMischief Год назад

Glad it was helpful! Thanks so much for commenting!

@NJDigger 9 месяцев назад

Thanks brother , had the same problem on my kids 2019 wrangler and the reset fixed it 👌

@MotorsandMischief 9 месяцев назад

Glad it helped! Thanks for commenting!

@arthurkallis9565 6 месяцев назад

You're the man! Thank you so much, I was about to replace the instrument cluster, and tipm if I had to. Fortunately the trick cleaning the battery terminals in holding them together to reset them did the trick. No more wipers on turn signals are working everything's back to normal. Thanks again

@MotorsandMischief 6 месяцев назад

That's awesome! So glad it helped. And thanks for commenting!

@randy9886 5 месяцев назад

Similar situation but I had NO instrument cluster lights,mileage,turn signals, horn and would not go out of park.** But would start**Did the battery thing and all works now. You saved me and bless you

@rayemling282 11 месяцев назад

2012 i had in the shop sit in a heavy rain with top off. Next day no headlights, turn signal are wipers. Reset the tipm and it fixed it! Thanks for your video 🏁

@MotorsandMischief 11 месяцев назад

So happy we were able to help, thanks for commenting!

@techcomco5589 Год назад

Thanks I fix my jeep.

@r0mulyni2 11 месяцев назад

Very good video my friend, just drove from NYC to AZ 125F heat killed battery, wiper fluid nozzle got brittle broke off l, spraying fluid to fuse box, will go through all these and see what works.

@MotorsandMischief 11 месяцев назад

Oh man that sucks the nozzle sprayed directly into the electrical center, but of course it did, right? Good luck with the testing; we know from personal experience a lot of stuff on these Jeeps comes back to life once it dries out. Thanks for the comment!

@user-xq1kb5rq8j 9 месяцев назад

Great video, been fighting this problem for about a year now on 2015 jk, first happened (windshield wipers turn on, all the idiot lights, but not any of the warning like tipm, lights flash, then it started working again and came back six months later). I have replaced the battery and new after market terminals (dont get me started on the terminals that are hard connected to the wiring harness, so i cut the terminal off and added vgate terminals, they are much better, but with an optima battery the negative terminal butts up against the plastic battery housing and if you have to cut down a six mm allen wrench in order to tighten it up). So now it's even gotten worse, it can just sit in the garage and it happens every few minutes or so, no issue door ajar problems. I do have a sway bar disconnect so i will look at those this weekend, along with checking the grounds and probably discharge the tipm completely, pull the tipm, check the fuses and basically just unplug and plug back in and hope that helps. after that, if it is down to cluster, canbus or tipm, hopefully the dealer can tell me which one. I agree if you know which part went bad, easy to swap. thanks again for your video, great job

@MotorsandMischief 9 месяцев назад

Thanks for the detailed comment and man oh man we hope you get your fixed, super frustrating for sure. Thanks for the comment and let us know what it turns out to be!

@NayomalWijeratne 7 месяцев назад

Hello! I have a small question, will a bad clock spring also cause the wiper and light issue?

@Urbanight Год назад

Long story short 2012 Jeep Wrangler JK. Went round and round new Tipm..... and it was the plug for my alternator......

@MotorsandMischief Год назад

Oh man that sucks. But good job figuring it out and thanks so much for posting your fix to help out other folks!

@Greenwitch_Garden Год назад

I have a 2017 JKU and I’m having crazy TIPM issues. My wipers won’t turn off, windows won’t roll down (scary in an emergency), fog lights flicker on and off, having issues with the Uconnect/Bluetooth, and of course swaybar disconnect light flashing yet cannot disable or engage the swaybar. I cleaned the battery and noticed a cracked terminal so I’m replacing that tomorrow. I took out the TIPM and checked all fuses which appear ok, but I’ll need to re-check. I ordered a refurbished TIPM from Maks TIPM rebuilders. It’s coming tomorrow so I will pop it in and see if that works. They have a rental program so I can send it back, less the rental cost, if it isn’t the problem. Glad I found your video. You just gave me a lot more to consider. I also can’t get an appointment with the dealer for two weeks. I’m supposed to leave on a cross country road trip in two weeks, but can’t do that if I’m having all these issues and can’t solve it.

@MotorsandMischief Год назад

Really glad the video helped and we'd love to hear back when you resolve it so that other viewers can benefit from what you learned. Thanks so much for commenting!

@theeaglesrule1 Год назад

Was TIPM the issue?

@year1camaro 29 дней назад

I've had this exact same issue for years. Every once in a while it does the same thing. I have two batteries in my 2011 with a marine switch for them at the batteries. I turn the battery switch to off and turn it right back on and its fixed. Lasts for about 6 months to a year. I have no idea why it does it, but I've heard solder connections in the tipm can set it off.

@rollnthnda Год назад

Hello thank you so much for the video. When I get home from work I’m going to be running through your check list on my wife’s 2015 jeep wrangler. Our issue is the wiper blades and fog lights seem to have a mind of their own. They turn on and off all by themselves constantly, and now the headlights don’t seem to respond to what your trying to do whether you’re turning them on or off with the stalk. They will say the lights are off, but they’re actually on and the only way you can get the lights to turn off is to shut the jeep off.

@MotorsandMischief Год назад

Hey thanks for the comment! Yes, the Jeep is behaving exactly as its supposed to, even tho it seems like it has a mind of its own. The computer has lost contact with the headlight and wiper switch, so it doesn't know what position you have them in, and for safety reasons (in case its a dark and stormy night, because the computer doesn't know that either), it turns everything on. You can pull the fuse for the wipers, but it won't hurt anything to drive it with the headlights on. But just following the steps in the video will get you through all the items that could cause loss of communication and more than half of them don't require any new parts. There is a possibility it will be the cluster (like ours was) or the TIPM itself, but you can avoid throwing parts at it by going through all the steps in the video. Good luck, you got this!

@it7191 2 месяца назад

👍🏽🥰

@mikekuhnkey7231 Год назад

Question...Was the "Sweep Test" on the Cluster Performed? (Key-Off...Depress Menu Switch on Cluster...Key-On) It "sweeps" all Gauges and checks lights on my 2007 JK Unlimited)

@MotorsandMischief Год назад

No, we did not know about the sweep test. That's awesome! It would have been interesting to test that on this Jeep, since the cluster was what ended up being the problem. Good test to have in the arsenal tho, thank you for explaining it!

@TopNoTchVSOP 8 месяцев назад

Faulty Cam sensor also give crazy codes in Jeep Wranglers.

@MotorsandMischief 8 месяцев назад

Thank you for adding to that! An excellent thing to check as well.

@ginaforet377 28 дней назад

would that make my wipers blow a fuse when you turn them on?

@fabiolavaquera8570 10 месяцев назад

What if The steering wheel get stiff as well?

@davidschwartz-xm5te Год назад

Great video!! Thanks. Have the exact same problem. You didn't mention the wiper issue, did the cluster also fix your front wipers staying on?

@MotorsandMischief Год назад

It did. The wipers come on because the computer doesn’t know what position the switch is in so in case you need the wipers, it defaults to turning them on. Once we replaced the cluster the computer got the signal back from the switch and everything worked normally. Thanks so much for the great comment!!

@justfishing6067 Год назад

I bought an 07 with a blown engine, i couldn't test much, however the price was right. Engine rebuilt, i missed a single airbag sensor in the front (left). All was fine except for some oddness issues with the o2 sensors... Then i find the connector for the airbag, i commect it, the light goes out. I'm thinking "yay! All lights in the dash are off!". Then the weird shit starts while I'm doing engine break-in runs... lol

@johnnhoj15 5 месяцев назад

My headlights would turn on, wiper blades turned on and wouldn't turn off, turn signals wouldn't work either. Before changing any parts I torqued down my grounds as well as battery terminals, turned my 2008 Jeep Wrangler back on and after about 5 seconds my car went back to normal operation. I was very thankful I didn't need any parts or further testing.

@MotorsandMischief 5 месяцев назад

The JKs are really picky about their grounds and power connections. Glad yours was an easy fix!

@beardymcgee43 Год назад

Great video - Mine seems to require an instrument cluster replacement. I have a 2009 JK Sport - do you know if an instrument cluster from 2011 - 17 will fit my vehicle? I've been told conflicting things.

@MotorsandMischief Год назад

Our experience is by no means exhaustive but we've found that JK's prior to 2011 all had year-specific instrument clusters. So you need a 2008 for a 2008 and a 2007 for a 2007, etc. In 2011 they standardized the clusters and they fit every JK from 2011 on. We found ours on eBay and we see at this moment there's a couple 2008 clusters available. Thanks for the question!

@crystylev4571 Год назад

Was looking to find out what's going on with my 2011 jeep. I woke up at 230am to find headlights and interior lights on, hubby went to go look and as he was going downstairs, I seen them turn off and turn back on, it creeped me out. It was like someone was in it turning the headlights on and off, by the time he went out, they just stayed on. As he opened the door and hit the interior buttons on and off and unlocked and locked the doors, they ended up turning off, but it's like it's haunted too. It hadn't been driven in like a day. Keys get hung up by the door, so I'm watching this video rn and sending it to him to see if we can figure it out.

@MotorsandMischief Год назад

Thanks for the comment! Yeah, the Jeep can sure seem possessed when these issues act up, but if you guys go through the steps, you'll find the issue. For most people its just the battery cables. Good luck!

@jessicadecker2700 5 месяцев назад

Thank you for putting your time into this video for all of us with this issue 🙂 I have a question for you... So I had the exact same thing as you did in the beginning of this video. My 2010 Sahara needed the radiator replaced so they put a new one in. Then while going down the checklist here trying to figure out whats going on and waiting for the cluster to come in, she decided not to crank over anymore. Put in the new cluster, that fixed the issues like yours did. But she still won't start. TIPM fuses are fine. Any ideas on what might be going on?? Any of your input would be greatly appreciated. Thanks!!

@MotorsandMischief 5 месяцев назад

So there's a phenomenon we fall victim too quite often, and that's forgetting that although its unlikely, it is possible to have two completely unrelated problems at the same time. So we spend all our time looking at the issue from the original problem only to find, hours later after we've thrown way too many parts and hours at the problem, that it was a simple but entirely unrelated problem. So our advice here is to treat this as its own problem until you prove to yourself that its related, instead of the other way around. Cold can cause the starter wire to stop flowing power, if its a little corroded internally. So first things first. Check fuse J17. Its a 40amp fuse and its controls the starter relay. If that's good, then put a multimeter or test light on the relay wire at the starter and see if you're getting a signal when you turn the key. If you are, then the problem has nothing to do with the ignition or TIPM or anything like that. In this case, the problem is going to be in the starter cable or the starter itself. If you don't have a signal at the starter, then its going to be either in the starter relay, the wiring or the PCM. The PCM sends a signal to engage the starter relay, so you can test if that signal is going from the PCM and also if it makes to the TIPM. If it does, check that there's a signal coming out of the TIPM to go to the starter. That will tell you if its in the wiring. If all that is good, try a new starter relay. Google JK starter circuit diagram, there's a bunch of good ones, and its a very simple circuit; you should be able to track down the issue pretty quickly. Good luck!!

@jessicadecker2700 5 месяцев назад

@@MotorsandMischief Thank you so much for taking your time to get back to me!! I've been going nuts over here for about 2 months trying to to figure this out. It makes it even harder because it's stuck at my father in laws house, an hour away from me. I have to trust that he's checking the areas that I've been researching without getting upset with me. I was thinking the BCM to start with but, he's been stuck and convinced it's the TIPM. Hopefully I'll be able to get my jeep back to me soon so I can just get it done myself. I greatly appreciate your wise feedback!! Thanks a bunch! Have a great week guys ✌🏼

@writtenpieceopaper1 8 месяцев назад

Thank you for posting this. The grounds at minute 4:01, are they under the dash or under the driver seat? I have a 2008 Jeep 2 door.

@writtenpieceopaper1 8 месяцев назад

To answer my own question, the grounds will be under the dash on both sides closest to the door/feet panel and both front seats towards the console.

@MotorsandMischief 8 месяцев назад

You beat us to it, and you're spot on! Thank you sir! Appreciate your comments!

@tataiinsertlastnamehere6471 Год назад

My issue with my compass is when I make a turn or use my signals, the wipers go off. The only tonstop the wipers is actually turning the wipers dial all the way up or using the opposite signal light. I've taken it to the dealer and to my mechanic and both can never find codes. I never have issues with any code lights coming in either.

@MotorsandMischief Год назад

We wouldn't expect to see any codes in a situation like that. It sounds like your switch is shorting out and when you use the turn signals, the wipes get a signal (the same one the blinkers are getting). As far as the Compass is concerned, you turned on the wipers so its just doing what it was told. If it were our vehicle, we'd inspect the turn signal and see if there were any damaged wires or if the mechanism itself could possibly short out and make contact on both connections. Good luck with it and thanks for the question!

@codyh9408 2 года назад

Probably is mine aswell had water spill into jeep removing a cover.

@MotorsandMischief 2 года назад

That could do it, follow the test steps in the video and it'll help sort it out. Thanks for the comment!

@SpiritsDescent Год назад

My 2010 used to remote start by itself and turn the lights on. Then it’d click off. I had a warn wench on it at the time, it came that way from dealership. Had all these random ass blue wires on the battery, turned out the wench was shorting it out cause the previous owner slapped it together. Drove me nuts cause we went through a lot of batteries before we figured it out

@MotorsandMischief Год назад

We always, always remove all the aftermarket wiring from any used vehicle we buy, for precisely this reason. Remote starting itself is a new one but its a darn good thing you don't have a manual. We could imagine coming out to the garage and seeing the JK having driven itself away... or through the back of the garage. Yikes! Glad you were able to get it fixed. It absolutely amazes us how many people who have no idea what they're doing with automotive electrical will just happily rewire stuff. Insane. Thanks for commenting!

@mikekuhnkey7231 Год назад

When did you put Wiper fuse back in TIPM?....No "fuel pump" relay or "Wiper" relay issues in TIPM...TIPM relays notorious for 2007 failure....part#No NEXEM Phillipines EX2-2015 884 2860...if you can still find them? Rebuilds were a "Cottage Industry" back in the day!

@MotorsandMischief Год назад

According to the research we did, Jeep had resolved the relay issues by 2013, which is what this one is, so that didn't apply to us. But its good to note it for other viewers in case theirs does have that issue. Thank you for the info!

@volcer 5 месяцев назад

does anyone have a wireing diagram for the C4 connector?

@MotorsandMischief 5 месяцев назад

We don't have one but Mitchell, the guys who supply the digital repair manuals to the pros, have a DIY version they'll sell you for $20. It has every single factory wiring diagram, component locator and pin out diagram that Jeep made. www.eautorepair.net.

@xbpbat21x Год назад

So...where to start...I had all the same symptoms...all the dash lights...headlights wouldn't turn off...wipers won't turn off. I took out the instrument cluster to check the connections. They were clean. Plugged it back in, and turned the ignition to on, with no lights coming on, but wipers came on. I ordered a refurbished TIPM. It comes next week. I might need an instrument cluster...where did you get yours? My jeep is a 2008 jk X unlimited. I just hope this TIPM is the fix. Thanks for the video!

@MotorsandMischief Год назад

Fingers crossed! We got really lucky on our cluster, a warehouse lost freight distributor was selling 4 brand new factory units that had gotten misplaced, insurance paid out and then found so they were being liquidated by the insurance company. $250 on eBay. But there’s lots of used ones on eBay and occasionally some new ones. Good luck and thanks for the comment!

@gerardolopez8715 Год назад

anyone have an issue with a P0841 code ? suspecting it could be the tipm

@MotorsandMischief Год назад

P0841 is a transmission control module code. We haven't found any instances of this code being thrown because of a TIPM issue (which doesn't mean yours isn't, just that it's not super common). Is it showing any signs of bad shifting, hard shifting, flaring its shifts? Have you checked the usual suspects for a transmission code? Low or dirty fluid, electrical issue with the solenoid/pressure switch, internal transmission damage. Hope that helps!

@gerardolopez8715 Год назад

@@MotorsandMischief I’ve done everything from the basic stuff to checking the trans with different shops verifying everything is good mechanically. Harnesses to the pcm checked out good , PCM replaced twice as well as the solenoid pack. Last thing I can think of is the pressure switch which is along with the valve body.