Thank you safe T cap!!! And you Justin for always being ahead of the curve I laughed out loud at 12:41 “that’s what we’re working with absolutely 0 light” 😂😂😂
Thank you so much for your videos and your help I wouldn’t have been able to do the job without your advice and your responses the kit is all welded in and the control arms are connected I just have a few cab mounts to replace the 2 above the rear bumper are going to be the trickiest
You do good work however, when measuring frame alignment you really should be measuring using a transom, that way you are consistent front back on both sides. Just my opinion.
So all of my measurements are good but my lower control arm doesn’t line up it’s less than 1/2 an inch from bolting in did my rear diff shift after I discontinued everything
They always do. You’ll need to use a ratchet strap from the rear shock mount to the front lower control arm. That will give you the ability to pull the axle forward
I want to say thank you so much for the vids and answering my questions I got it tacked into place and the lower control arm hooked up I have to have a certified welder to finish the job it’s going to the shop tomorrow you helped me gain my confidence back I lost my dad we worked on projects together I haven’t done anything since he passed
