Тёмный

Jeep Wrangler JL Oracle Rear Bumper LED Reverse Lights Review & Install 

ExtremeTerrain Jeep
Подписаться 232 тыс.
Просмотров 10 тыс.
50% 1

LED Reverse Lights. Improve visibility and your safety with these Oracle Rear Bumper LED Reverse Lights. Designed for utility and convenience, it features 20 LEDs with an overall output of 1000 lumens with a optic-focused wide beam pattern to make reverse driving or parking a whole lot easier.
Durable Construction. Made to provide you with reliable lighting on any weather, it features clear PMMA lens, cast aluminum housing with powder-coat finish for an extra layer of corrosion resistance.
Installation. This product is easy to install and should take about 1 hours.
Application. The Oracle Rear Bumper LED Reverse Lights fits 2018-2023 Jeep Wrangler JL.
terrain.jp/3LM...
Intro - 0:04
Features - 0:33
Construction - 1:03
Price - 1:44
Install Difficulty - 2:15
Full Install - 2:33
Item J162841-JL
----------------------------------------------------------------
Subscribe to ExtremeTerrain to get the latest off-road news, new product videos, exciting content and more!
Subscribe for Daily Off-Road Videos! : terrain.jp/Subs...
Facebook: / extremeterrain
Instagram: / extremeterrain
ExtremeTerrain.com is your off-road outfitters! We carry a giant selection of aftermarket off-road accessories for whatever rig you're driving! With FREE 2 or 3 Day Shipping on over 10,000 products and the best customer service in the industry, we have you covered!
www.extremeterr...

Опубликовано:

 

9 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 9   
@extremeterrain
@extremeterrain Год назад
Shop These Oracle Rear Bumper LED Reverse Lights ! : terrain.jp/3LMiSzq
@cmmeme
@cmmeme Год назад
So just installed these last night. I took the bumper off, then I took the few seconds to take the metal bar off the bumper to access those to 7 mm screws holding the reflectors in place. Put lights in, screws back in, then reattached the bar with no problem. I have seen so many videos where the biggest problem was accessing these little screws-- TAKE THE BAR OFF - LITERALLY 1 MINUTE. The bigger issue was making sure those wire splicers were pressed hard enough to connect the ground wire. Air ratchet is a must to save time.
@theonlyjaystyles
@theonlyjaystyles Год назад
DON'T buy these! I have them and they broke after 3 months. The manufacturer charged me to repair them under warranty because they claimed it was installed improperly. Which is %100 BS. Got them back on only to have them break again in 4 months. Everything they make is Chinese trash.
@d-unit-outdoors
@d-unit-outdoors 11 месяцев назад
Man nobody is doing a before and after from inside the cab viewing the screen.
@streamergoalline
@streamergoalline 4 месяца назад
Anyone worried about what to torque all these bolts back too?
@gab4690
@gab4690 Год назад
They are super bright but mine got water in after a few months and they won't do anything.
@jeepoffroad
@jeepoffroad 9 месяцев назад
These things, like most Oracle products, are trash. They don’t fit in the factory steel rear bumper, and after a month or so the lights will build up condensation and take on water behind the lens. Steer clear of these and just get yourself a couple of 3” pod lights instead.
@fredericnzeyimana
@fredericnzeyimana Год назад
Then where are going to be placed sensors from their place?!
@Mcfly765
@Mcfly765 8 месяцев назад
Garbage
Далее
Jeep JL Oracle backup lights installation.
10:33
ДОКАЗАЛ ЧТО НЕ КАБЛУК #shorts
00:30
Просмотров 933 тыс.
Mark Rober vs Dude Perfect- Ultimate Robot Battle
19:00
Avoid These Mistakes when Looking for a Rear Bumper
16:10
New Rubicon Steel Rear Bumper Install on JL Wrangler
17:27
Oracle LED Reverse Light Install
9:06
Просмотров 6 тыс.
ДОКАЗАЛ ЧТО НЕ КАБЛУК #shorts
00:30
Просмотров 933 тыс.